SKF utilizes decades of bearing sealing experience to provide solutions that gives the ultimate riding experience with reduced friction, increased service intervals and longer bearing life. The Wheel Seal Kit includes SKF bearings, seals and spacers

Email Tristana@browardmotorsports.com

SKF utilizes decades of bearing sealing experience to provide solutions that gives the ultimate riding experience with reduced friction, increased service intervals and longer bearing life. The Wheel Seal Kit includes SKF bearings, seals and spacers

Email Tristana@browardmotorsports.com

SKF utilizes decades of bearing sealing experience to provide solutions that gives the ultimate riding experience with reduced friction, increased service intervals and longer bearing life. The Wheel Seal Kit includes SKF bearings, seals and spacers

Email Tristana@browardmotorsports.com

SKF utilizes decades of bearing sealing experience to provide solutions that gives the ultimate riding experience with reduced friction, increased service intervals and longer bearing life. The Wheel Seal Kit includes SKF bearings, seals and spacers

Email Tristana@browardmotorsports.com

SKF utilizes decades of bearing sealing experience to provide solutions that gives the ultimate riding experience with reduced friction, increased service intervals and longer bearing life. The Wheel Seal Kit includes SKF bearings, seals and spacers

Email Tristana@browardmotorsports.com

SKF utilizes decades of bearing sealing experience to provide solutions that gives the ultimate riding experience with reduced friction, increased service intervals and longer bearing life. The Wheel Seal Kit includes SKF bearings, seals and spacers

Email Tristana@browardmotorsports.com

SKF utilizes decades of bearing sealing experience to provide solutions that gives the ultimate riding experience with reduced friction, increased service intervals and longer bearing life. The Wheel Seal Kit includes SKF bearings, seals and spacers

Email Tristana@browardmotorsports.com

SKF utilizes decades of bearing sealing experience to provide solutions that gives the ultimate riding experience with reduced friction, increased service intervals and longer bearing life. The Wheel Seal Kit includes SKF bearings, seals and spacers

Email Tristana@browardmotorsports.com

SKF utilizes decades of bearing sealing experience to provide solutions that gives the ultimate riding experience with reduced friction, increased service intervals and longer bearing life. The Wheel Seal Kit includes SKF bearings, seals and spacers

Email Tristana@browardmotorsports.com

SKF utilizes decades of bearing sealing experience to provide solutions that gives the ultimate riding experience with reduced friction, increased service intervals and longer bearing life. The Wheel Seal Kit includes SKF bearings, seals and spacers

Email Tristana@browardmotorsports.com

SKF utilizes decades of bearing sealing experience to provide solutions that gives the ultimate riding experience with reduced friction, increased service intervals and longer bearing life. The Wheel Seal Kit includes SKF bearings, seals and spacers

Email Tristana@browardmotorsports.com

SKF utilizes decades of bearing sealing experience to provide solutions that gives the ultimate riding experience with reduced friction, increased service intervals and longer bearing life. The Wheel Seal Kit includes SKF bearings, seals and spacers

Email Tristana@browardmotorsports.com

SKF utilizes decades of bearing sealing experience to provide solutions that gives the ultimate riding experience with reduced friction, increased service intervals and longer bearing life. The Wheel Seal Kit includes SKF bearings, seals and spacers

Email Tristana@browardmotorsports.com

SKF utilizes decades of bearing sealing experience to provide solutions that gives the ultimate riding experience with reduced friction, increased service intervals and longer bearing life. The Wheel Seal Kit includes SKF bearings, seals and spacers

Email Tristana@browardmotorsports.com

SKF utilizes decades of bearing sealing experience to provide solutions that gives the ultimate riding experience with reduced friction, increased service intervals and longer bearing life. The Wheel Seal Kit includes SKF bearings, seals and spacers

Email Tristana@browardmotorsports.com

SKF utilizes decades of bearing sealing experience to provide solutions that gives the ultimate riding experience with reduced friction, increased service intervals and longer bearing life. The Wheel Seal Kit includes SKF bearings, seals and spacers

Email Tristana@browardmotorsports.com

SKF utilizes decades of bearing sealing experience to provide solutions that gives the ultimate riding experience with reduced friction, increased service intervals and longer bearing life. The Wheel Seal Kit includes SKF bearings, seals and spacers

Email Tristana@browardmotorsports.com

SKF utilizes decades of bearing sealing experience to provide solutions that gives the ultimate riding experience with reduced friction, increased service intervals and longer bearing life. The Wheel Seal Kit includes SKF bearings, seals and spacers

Email Tristana@browardmotorsports.com

SKF utilizes decades of bearing sealing experience to provide solutions that gives the ultimate riding experience with reduced friction, increased service intervals and longer bearing life. The Wheel Seal Kit includes SKF bearings, seals and spacers

Email Tristana@browardmotorsports.com

SKF utilizes decades of bearing sealing experience to provide solutions that gives the ultimate riding experience with reduced friction, increased service intervals and longer bearing life. The Wheel Seal Kit includes SKF bearings, seals and spacers

Email Tristana@browardmotorsports.com

SKF utilizes decades of bearing sealing experience to provide solutions that gives the ultimate riding experience with reduced friction, increased service intervals and longer bearing life. The Wheel Seal Kit includes SKF bearings, seals and spacers

Email Tristana@browardmotorsports.com

SKF utilizes decades of bearing sealing experience to provide solutions that gives the ultimate riding experience with reduced friction, increased service intervals and longer bearing life. The Wheel Seal Kit includes SKF bearings, seals and spacers

Email Tristana@browardmotorsports.com

SKF utilizes decades of bearing sealing experience to provide solutions that gives the ultimate riding experience with reduced friction, increased service intervals and longer bearing life. The Wheel Seal Kit includes SKF bearings, seals and spacers

Email Tristana@browardmotorsports.com

SKF utilizes decades of bearing sealing experience to provide solutions that gives the ultimate riding experience with reduced friction, increased service intervals and longer bearing life. The Wheel Seal Kit includes SKF bearings, seals and spacers

Email Tristana@browardmotorsports.com

SKF utilizes decades of bearing sealing experience to provide solutions that gives the ultimate riding experience with reduced friction, increased service intervals and longer bearing life. The Wheel Seal Kit includes SKF bearings, seals and spacers

Email Tristana@browardmotorsports.com

SKF utilizes decades of bearing sealing experience to provide solutions that gives the ultimate riding experience with reduced friction, increased service intervals and longer bearing life. The Wheel Seal Kit includes SKF bearings, seals and spacers

Email Tristana@browardmotorsports.com

SKF utilizes decades of bearing sealing experience to provide solutions that gives the ultimate riding experience with reduced friction, increased service intervals and longer bearing life. The Wheel Seal Kit includes SKF bearings, seals and spacers

Email Tristana@browardmotorsports.com

Totally NEW DUAL COMPOUND: Innovative co-molding production technology which is patent pending by SKF. The rubber compounds are new and different from our previous aftermarket green seals. New metal insert and totally re-designed scraping and oil sealing lips. Open wound DS spring: this is not just a stretched std. spring but a dedicated fork seal spring with open winding. Benefits: constant force over time with no accumulation of debris between coils. Improved followability capability of the seals to conform to fork tube deflection. Will not dislodge during pressure washing

Email Tristana@browardmotorsports.com

What is it?
The InnTeck Low Friction Cartridge Seal kit replaces the stock cartridge rod seals and air
divider piston seals 
Why?
The Fork features many internal seals and 5 of the 6 seals are subject to
very high pressure. High pressure on a seal results in a tighter seal and therefore much more
seal drag (friction) when compared to other production forks.
How?
InnTeck utilized world class Italian bearing and seal manufacturer SKF’s expertise in creating
replacement seals that feature less seal drag (friction) and also seal better. This was
accomplished by using an SKF proprietary seal material and improved seal design. Doing so
allowed InnTeck to accomplish better sealing capabilities, less drag, and being able to use 1
seal in place of 3. Therefore eliminating two points of seal drag!
Results:
The decreased fork seal drag (friction) makes for a better performing and smoother feeling
fork.

Glide kit for the WP 48 mm AER forks

The red box include for the internal cartridges (both Air and Oil side):

• 1 x 24mm SKF piston seal for the Air side
• 1 x special alu made SKF piston seal support/seat
• 1 x 12mm SKF cartridge for the Air side
• 1 x special Alu made SKF cartridge seal cartridge cap.
• 1 x 12mm SKF cartridge for the Oil dumper side
• 1 x special Alu made SKF cartridge seal cartridge cap.
• The box will include video and printed instructions.

Email Tristana@browardmotorsports.com

What is it?
The InnTeck Low Friction Cartridge Seal kit replaces the stock cartridge rod seals and air
divider piston seals 
Why?
The Fork features many internal seals and 5 of the 6 seals are subject to
very high pressure. High pressure on a seal results in a tighter seal and therefore much more
seal drag (friction) when compared to other production forks.
How?
InnTeck utilized world class Italian bearing and seal manufacturer SKF’s expertise in creating
replacement seals that feature less seal drag (friction) and also seal better. This was
accomplished by using an SKF proprietary seal material and improved seal design. Doing so
allowed InnTeck to accomplish better sealing capabilities, less drag, and being able to use 1
seal in place of 3. Therefore eliminating two points of seal drag!
Results:
The decreased fork seal drag (friction) makes for a better performing and smoother feeling
fork.

Glide kit for the WP 48 mm AER forks

The red box include for the internal cartridges (both Air and Oil side):

• 1 x 24mm SKF piston seal for the Air side
• 1 x special alu made SKF piston seal support/seat
• 1 x 12mm SKF cartridge for the Air side
• 1 x special Alu made SKF cartridge seal cartridge cap.
• 1 x 12mm SKF cartridge for the Oil dumper side
• 1 x special Alu made SKF cartridge seal cartridge cap.
• The box will include video and printed instructions.

Email Tristana@browardmotorsports.com

The InnTeck Low Friction Cartridge Seal kit replaces the stock cartridge rod seals and air divider piston seals. The decreased fork seal drag (friction) makes for a better performing and smoother feeling fork.

Email Tristana@browardmotorsports.com

Protection from intense off-road contamination and frequent high pressure washing SKF utilizes decades of bearing sealing experience to provide solutions that gives the ultimate riding experience with reduced friction, increased service intervals and longer bearing life. The Wheel Seal Kit also includes SKF bearings.

Email Tristana@browardmotorsports.com

SKF floating piston for WP and Ohlins shocks is a replacement to their OEM gas to oil separator which is present in the reservoir of those shocks. OEM separator is normally built with a rigid plastic or metal body surrounded with a thick O-ring sealing into the reservoir body. This type of design causes significant friction against vertical movement of the separator, making it difficult for the shock to react to small high frequency bump absorption. SKF Floating piston is designed to replace OEM separator without having to replace the OEM reservoir design. The SKF floating piston is made using the SKF special low friction compound. It features two sealing lips against the reservoir walls for perfect seal and separation between oil and gas. Moreover the central portion of the piston membrane is designed with a level of flexibility. The SKF Floating piston equipped reservoir allows for increased reactivity of the shock in absorbing high frequency small bumps and in following the oil transfers from/to the body from/to the reservoir. The flexible center membrane starts deforming first, anticipating the complete piston movement, thus enhancing the shock reactivity to small bump absorption.

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Fork Seal Kit

Low friction fork seal solution which improves feel and comfort,

while increasing the reliability through better dirt exclusion.

• 20% Reduction of friction
• Improved feel and smoothness
• Increased life and performance
• Enhanced water and dirt protection
• Reduced wear and air suction
• M X A  5 Star Rated "The added performance gained by the reduction of stiction is icing on the cake. The cake itself is doubling the fork seal life"

H-D Seal Kit

This kit is recommended for extreme mud riding conditions. To safeguard the performance of the fork, SKF recommends replacing oil seal and dirt scraper at the same time. A worn dirt scraper can heavily contribute to reduce the oil seal life time and effectiveness in operation

Dual Compound Seal Kit

Totally NEW DUAL COMPOUND:  Innovative co-molding production technology which is patent pending by SKF. The rubber compounds are new and different from our previous aftermarket green seals. New metal insert and totally re-designed scraping and oil sealing lips. Open wound DS spring: this is not just a stretched std. spring but a dedicated fork seal spring with open winding. Benefits: constant force over time with no accumulation of debris between coils. Improved followability capability of the seals to conform to fork tube deflection. Will not dislodge during pressure washing

• Minimum friction for enhanced riding comfort and compliance
• Improved contamination exclusion
• Stable performance over time
• Extended sealing capability
• Improved durability

SKF PTFE composite fork bushings are the maintenance-free solution in demanding applications such as front fork motorcycle suspensions.

SKF fork bushings combine the mechanical strength of steel with the low friction of a PTFE-based self-lubricating sliding layer. The intermediate thin bronze layer creates a strong bond between the backing and sliding surfaces, and improves the dissipation of heat generated during operation. To protect the bearings from corrosion, the steel backing is copper-plated.

The PTFE-based sliding surface permits smooth, low-friction operation for a plush riding feeling. During a short run phase, there will be some transfer of PTFE material from the sliding contact surface to the counter face. After transfer, the characteristic low friction and wear properties of these bushings will be achieved.

Benefits of the fork bushings are:

• maintenance-free operation

• low frictional properties under side load

• high load carrying capacity

• stability at wide operating temperatures

• small operating clearance for improved guidance

• dimensions marking for quick product identification

***NOTE: KIT IS ONE FORK SEAL ONE WIPER MUST ORDER 2EA FOR COMPLETE FORK REBUILD

***NOTE: BUSHINGS ARE SOLD AS EACH

Email Tristana@browardmotorsports.com

Fork Seal Kit

Low friction fork seal solution which improves feel and comfort,

while increasing the reliability through better dirt exclusion.

• 20% Reduction of friction
• Improved feel and smoothness
• Increased life and performance
• Enhanced water and dirt protection
• Reduced wear and air suction
• M X A  5 Star Rated "The added performance gained by the reduction of stiction is icing on the cake. The cake itself is doubling the fork seal life"

H-D Seal Kit

This kit is recommended for extreme mud riding conditions. To safeguard the performance of the fork, SKF recommends replacing oil seal and dirt scraper at the same time. A worn dirt scraper can heavily contribute to reduce the oil seal life time and effectiveness in operation

Dual Compound Seal Kit

Totally NEW DUAL COMPOUND:  Innovative co-molding production technology which is patent pending by SKF. The rubber compounds are new and different from our previous aftermarket green seals. New metal insert and totally re-designed scraping and oil sealing lips. Open wound DS spring: this is not just a stretched std. spring but a dedicated fork seal spring with open winding. Benefits: constant force over time with no accumulation of debris between coils. Improved followability capability of the seals to conform to fork tube deflection. Will not dislodge during pressure washing

• Minimum friction for enhanced riding comfort and compliance
• Improved contamination exclusion
• Stable performance over time
• Extended sealing capability
• Improved durability

SKF PTFE composite fork bushings are the maintenance-free solution in demanding applications such as front fork motorcycle suspensions.

SKF fork bushings combine the mechanical strength of steel with the low friction of a PTFE-based self-lubricating sliding layer. The intermediate thin bronze layer creates a strong bond between the backing and sliding surfaces, and improves the dissipation of heat generated during operation. To protect the bearings from corrosion, the steel backing is copper-plated.

The PTFE-based sliding surface permits smooth, low-friction operation for a plush riding feeling. During a short run phase, there will be some transfer of PTFE material from the sliding contact surface to the counter face. After transfer, the characteristic low friction and wear properties of these bushings will be achieved.

Benefits of the fork bushings are:

• maintenance-free operation

• low frictional properties under side load

• high load carrying capacity

• stability at wide operating temperatures

• small operating clearance for improved guidance

• dimensions marking for quick product identification

***NOTE: KIT IS ONE FORK SEAL ONE WIPER MUST ORDER 2EA FOR COMPLETE FORK REBUILD

***NOTE: BUSHINGS ARE SOLD AS EACH

Email Tristana@browardmotorsports.com

Fork Seal Kit

Low friction fork seal solution which improves feel and comfort,

while increasing the reliability through better dirt exclusion.

• 20% Reduction of friction
• Improved feel and smoothness
• Increased life and performance
• Enhanced water and dirt protection
• Reduced wear and air suction
• M X A  5 Star Rated "The added performance gained by the reduction of stiction is icing on the cake. The cake itself is doubling the fork seal life"

H-D Seal Kit

This kit is recommended for extreme mud riding conditions. To safeguard the performance of the fork, SKF recommends replacing oil seal and dirt scraper at the same time. A worn dirt scraper can heavily contribute to reduce the oil seal life time and effectiveness in operation

Dual Compound Seal Kit

Totally NEW DUAL COMPOUND:  Innovative co-molding production technology which is patent pending by SKF. The rubber compounds are new and different from our previous aftermarket green seals. New metal insert and totally re-designed scraping and oil sealing lips. Open wound DS spring: this is not just a stretched std. spring but a dedicated fork seal spring with open winding. Benefits: constant force over time with no accumulation of debris between coils. Improved followability capability of the seals to conform to fork tube deflection. Will not dislodge during pressure washing

• Minimum friction for enhanced riding comfort and compliance
• Improved contamination exclusion
• Stable performance over time
• Extended sealing capability
• Improved durability

SKF PTFE composite fork bushings are the maintenance-free solution in demanding applications such as front fork motorcycle suspensions.

SKF fork bushings combine the mechanical strength of steel with the low friction of a PTFE-based self-lubricating sliding layer. The intermediate thin bronze layer creates a strong bond between the backing and sliding surfaces, and improves the dissipation of heat generated during operation. To protect the bearings from corrosion, the steel backing is copper-plated.

The PTFE-based sliding surface permits smooth, low-friction operation for a plush riding feeling. During a short run phase, there will be some transfer of PTFE material from the sliding contact surface to the counter face. After transfer, the characteristic low friction and wear properties of these bushings will be achieved.

Benefits of the fork bushings are:

• maintenance-free operation

• low frictional properties under side load

• high load carrying capacity

• stability at wide operating temperatures

• small operating clearance for improved guidance

• dimensions marking for quick product identification

***NOTE: KIT IS ONE FORK SEAL ONE WIPER MUST ORDER 2EA FOR COMPLETE FORK REBUILD

***NOTE: BUSHINGS ARE SOLD AS EACH

Email Tristana@browardmotorsports.com

Fork Seal Kit

Low friction fork seal solution which improves feel and comfort,

while increasing the reliability through better dirt exclusion.

• 20% Reduction of friction
• Improved feel and smoothness
• Increased life and performance
• Enhanced water and dirt protection
• Reduced wear and air suction
• M X A  5 Star Rated "The added performance gained by the reduction of stiction is icing on the cake. The cake itself is doubling the fork seal life"

H-D Seal Kit

This kit is recommended for extreme mud riding conditions. To safeguard the performance of the fork, SKF recommends replacing oil seal and dirt scraper at the same time. A worn dirt scraper can heavily contribute to reduce the oil seal life time and effectiveness in operation

Dual Compound Seal Kit

Totally NEW DUAL COMPOUND:  Innovative co-molding production technology which is patent pending by SKF. The rubber compounds are new and different from our previous aftermarket green seals. New metal insert and totally re-designed scraping and oil sealing lips. Open wound DS spring: this is not just a stretched std. spring but a dedicated fork seal spring with open winding. Benefits: constant force over time with no accumulation of debris between coils. Improved followability capability of the seals to conform to fork tube deflection. Will not dislodge during pressure washing

• Minimum friction for enhanced riding comfort and compliance
• Improved contamination exclusion
• Stable performance over time
• Extended sealing capability
• Improved durability

SKF PTFE composite fork bushings are the maintenance-free solution in demanding applications such as front fork motorcycle suspensions.

SKF fork bushings combine the mechanical strength of steel with the low friction of a PTFE-based self-lubricating sliding layer. The intermediate thin bronze layer creates a strong bond between the backing and sliding surfaces, and improves the dissipation of heat generated during operation. To protect the bearings from corrosion, the steel backing is copper-plated.

The PTFE-based sliding surface permits smooth, low-friction operation for a plush riding feeling. During a short run phase, there will be some transfer of PTFE material from the sliding contact surface to the counter face. After transfer, the characteristic low friction and wear properties of these bushings will be achieved.

Benefits of the fork bushings are:

• maintenance-free operation

• low frictional properties under side load

• high load carrying capacity

• stability at wide operating temperatures

• small operating clearance for improved guidance

• dimensions marking for quick product identification

***NOTE: KIT IS ONE FORK SEAL ONE WIPER MUST ORDER 2EA FOR COMPLETE FORK REBUILD

***NOTE: BUSHINGS ARE SOLD AS EACH

Email Tristana@browardmotorsports.com

Fork Seal Kit

Low friction fork seal solution which improves feel and comfort,

while increasing the reliability through better dirt exclusion.

• 20% Reduction of friction
• Improved feel and smoothness
• Increased life and performance
• Enhanced water and dirt protection
• Reduced wear and air suction
• M X A  5 Star Rated "The added performance gained by the reduction of stiction is icing on the cake. The cake itself is doubling the fork seal life"

H-D Seal Kit

This kit is recommended for extreme mud riding conditions. To safeguard the performance of the fork, SKF recommends replacing oil seal and dirt scraper at the same time. A worn dirt scraper can heavily contribute to reduce the oil seal life time and effectiveness in operation

Dual Compound Seal Kit

Totally NEW DUAL COMPOUND:  Innovative co-molding production technology which is patent pending by SKF. The rubber compounds are new and different from our previous aftermarket green seals. New metal insert and totally re-designed scraping and oil sealing lips. Open wound DS spring: this is not just a stretched std. spring but a dedicated fork seal spring with open winding. Benefits: constant force over time with no accumulation of debris between coils. Improved followability capability of the seals to conform to fork tube deflection. Will not dislodge during pressure washing

• Minimum friction for enhanced riding comfort and compliance
• Improved contamination exclusion
• Stable performance over time
• Extended sealing capability
• Improved durability

SKF PTFE composite fork bushings are the maintenance-free solution in demanding applications such as front fork motorcycle suspensions.

SKF fork bushings combine the mechanical strength of steel with the low friction of a PTFE-based self-lubricating sliding layer. The intermediate thin bronze layer creates a strong bond between the backing and sliding surfaces, and improves the dissipation of heat generated during operation. To protect the bearings from corrosion, the steel backing is copper-plated.

The PTFE-based sliding surface permits smooth, low-friction operation for a plush riding feeling. During a short run phase, there will be some transfer of PTFE material from the sliding contact surface to the counter face. After transfer, the characteristic low friction and wear properties of these bushings will be achieved.

Benefits of the fork bushings are:

• maintenance-free operation

• low frictional properties under side load

• high load carrying capacity

• stability at wide operating temperatures

• small operating clearance for improved guidance

• dimensions marking for quick product identification

***NOTE: KIT IS ONE FORK SEAL ONE WIPER MUST ORDER 2EA FOR COMPLETE FORK REBUILD

***NOTE: BUSHINGS ARE SOLD AS EACH

Email Tristana@browardmotorsports.com

Fork Seal Kit

Low friction fork seal solution which improves feel and comfort,

while increasing the reliability through better dirt exclusion.

• 20% Reduction of friction
• Improved feel and smoothness
• Increased life and performance
• Enhanced water and dirt protection
• Reduced wear and air suction
• M X A  5 Star Rated "The added performance gained by the reduction of stiction is icing on the cake. The cake itself is doubling the fork seal life"

H-D Seal Kit

This kit is recommended for extreme mud riding conditions. To safeguard the performance of the fork, SKF recommends replacing oil seal and dirt scraper at the same time. A worn dirt scraper can heavily contribute to reduce the oil seal life time and effectiveness in operation

Dual Compound Seal Kit

Totally NEW DUAL COMPOUND:  Innovative co-molding production technology which is patent pending by SKF. The rubber compounds are new and different from our previous aftermarket green seals. New metal insert and totally re-designed scraping and oil sealing lips. Open wound DS spring: this is not just a stretched std. spring but a dedicated fork seal spring with open winding. Benefits: constant force over time with no accumulation of debris between coils. Improved followability capability of the seals to conform to fork tube deflection. Will not dislodge during pressure washing

• Minimum friction for enhanced riding comfort and compliance
• Improved contamination exclusion
• Stable performance over time
• Extended sealing capability
• Improved durability

SKF PTFE composite fork bushings are the maintenance-free solution in demanding applications such as front fork motorcycle suspensions.

SKF fork bushings combine the mechanical strength of steel with the low friction of a PTFE-based self-lubricating sliding layer. The intermediate thin bronze layer creates a strong bond between the backing and sliding surfaces, and improves the dissipation of heat generated during operation. To protect the bearings from corrosion, the steel backing is copper-plated.

The PTFE-based sliding surface permits smooth, low-friction operation for a plush riding feeling. During a short run phase, there will be some transfer of PTFE material from the sliding contact surface to the counter face. After transfer, the characteristic low friction and wear properties of these bushings will be achieved.

Benefits of the fork bushings are:

• maintenance-free operation

• low frictional properties under side load

• high load carrying capacity

• stability at wide operating temperatures

• small operating clearance for improved guidance

• dimensions marking for quick product identification

***NOTE: KIT IS ONE FORK SEAL ONE WIPER MUST ORDER 2EA FOR COMPLETE FORK REBUILD

***NOTE: BUSHINGS ARE SOLD AS EACH

Email Tristana@browardmotorsports.com

Fork Seal Kit

Low friction fork seal solution which improves feel and comfort,

while increasing the reliability through better dirt exclusion.

• 20% Reduction of friction
• Improved feel and smoothness
• Increased life and performance
• Enhanced water and dirt protection
• Reduced wear and air suction
• M X A  5 Star Rated "The added performance gained by the reduction of stiction is icing on the cake. The cake itself is doubling the fork seal life"

H-D Seal Kit

This kit is recommended for extreme mud riding conditions. To safeguard the performance of the fork, SKF recommends replacing oil seal and dirt scraper at the same time. A worn dirt scraper can heavily contribute to reduce the oil seal life time and effectiveness in operation

Dual Compound Seal Kit

Totally NEW DUAL COMPOUND:  Innovative co-molding production technology which is patent pending by SKF. The rubber compounds are new and different from our previous aftermarket green seals. New metal insert and totally re-designed scraping and oil sealing lips. Open wound DS spring: this is not just a stretched std. spring but a dedicated fork seal spring with open winding. Benefits: constant force over time with no accumulation of debris between coils. Improved followability capability of the seals to conform to fork tube deflection. Will not dislodge during pressure washing

• Minimum friction for enhanced riding comfort and compliance
• Improved contamination exclusion
• Stable performance over time
• Extended sealing capability
• Improved durability

SKF PTFE composite fork bushings are the maintenance-free solution in demanding applications such as front fork motorcycle suspensions.

SKF fork bushings combine the mechanical strength of steel with the low friction of a PTFE-based self-lubricating sliding layer. The intermediate thin bronze layer creates a strong bond between the backing and sliding surfaces, and improves the dissipation of heat generated during operation. To protect the bearings from corrosion, the steel backing is copper-plated.

The PTFE-based sliding surface permits smooth, low-friction operation for a plush riding feeling. During a short run phase, there will be some transfer of PTFE material from the sliding contact surface to the counter face. After transfer, the characteristic low friction and wear properties of these bushings will be achieved.

Benefits of the fork bushings are:

• maintenance-free operation

• low frictional properties under side load

• high load carrying capacity

• stability at wide operating temperatures

• small operating clearance for improved guidance

• dimensions marking for quick product identification

***NOTE: KIT IS ONE FORK SEAL ONE WIPER MUST ORDER 2EA FOR COMPLETE FORK REBUILD

***NOTE: BUSHINGS ARE SOLD AS EACH

Email Tristana@browardmotorsports.com

Fork Seal Kit

Low friction fork seal solution which improves feel and comfort,

while increasing the reliability through better dirt exclusion.

• 20% Reduction of friction
• Improved feel and smoothness
• Increased life and performance
• Enhanced water and dirt protection
• Reduced wear and air suction
• M X A  5 Star Rated "The added performance gained by the reduction of stiction is icing on the cake. The cake itself is doubling the fork seal life"

H-D Seal Kit

This kit is recommended for extreme mud riding conditions. To safeguard the performance of the fork, SKF recommends replacing oil seal and dirt scraper at the same time. A worn dirt scraper can heavily contribute to reduce the oil seal life time and effectiveness in operation

Dual Compound Seal Kit

Totally NEW DUAL COMPOUND:  Innovative co-molding production technology which is patent pending by SKF. The rubber compounds are new and different from our previous aftermarket green seals. New metal insert and totally re-designed scraping and oil sealing lips. Open wound DS spring: this is not just a stretched std. spring but a dedicated fork seal spring with open winding. Benefits: constant force over time with no accumulation of debris between coils. Improved followability capability of the seals to conform to fork tube deflection. Will not dislodge during pressure washing

• Minimum friction for enhanced riding comfort and compliance
• Improved contamination exclusion
• Stable performance over time
• Extended sealing capability
• Improved durability

SKF PTFE composite fork bushings are the maintenance-free solution in demanding applications such as front fork motorcycle suspensions.

SKF fork bushings combine the mechanical strength of steel with the low friction of a PTFE-based self-lubricating sliding layer. The intermediate thin bronze layer creates a strong bond between the backing and sliding surfaces, and improves the dissipation of heat generated during operation. To protect the bearings from corrosion, the steel backing is copper-plated.

The PTFE-based sliding surface permits smooth, low-friction operation for a plush riding feeling. During a short run phase, there will be some transfer of PTFE material from the sliding contact surface to the counter face. After transfer, the characteristic low friction and wear properties of these bushings will be achieved.

Benefits of the fork bushings are:

• maintenance-free operation

• low frictional properties under side load

• high load carrying capacity

• stability at wide operating temperatures

• small operating clearance for improved guidance

• dimensions marking for quick product identification

***NOTE: KIT IS ONE FORK SEAL ONE WIPER MUST ORDER 2EA FOR COMPLETE FORK REBUILD

***NOTE: BUSHINGS ARE SOLD AS EACH

Email Tristana@browardmotorsports.com

Fork Seal Kit

Low friction fork seal solution which improves feel and comfort,

while increasing the reliability through better dirt exclusion.

• 20% Reduction of friction
• Improved feel and smoothness
• Increased life and performance
• Enhanced water and dirt protection
• Reduced wear and air suction
• M X A  5 Star Rated "The added performance gained by the reduction of stiction is icing on the cake. The cake itself is doubling the fork seal life"

H-D Seal Kit

This kit is recommended for extreme mud riding conditions. To safeguard the performance of the fork, SKF recommends replacing oil seal and dirt scraper at the same time. A worn dirt scraper can heavily contribute to reduce the oil seal life time and effectiveness in operation

Dual Compound Seal Kit

Totally NEW DUAL COMPOUND:  Innovative co-molding production technology which is patent pending by SKF. The rubber compounds are new and different from our previous aftermarket green seals. New metal insert and totally re-designed scraping and oil sealing lips. Open wound DS spring: this is not just a stretched std. spring but a dedicated fork seal spring with open winding. Benefits: constant force over time with no accumulation of debris between coils. Improved followability capability of the seals to conform to fork tube deflection. Will not dislodge during pressure washing

• Minimum friction for enhanced riding comfort and compliance
• Improved contamination exclusion
• Stable performance over time
• Extended sealing capability
• Improved durability

SKF PTFE composite fork bushings are the maintenance-free solution in demanding applications such as front fork motorcycle suspensions.

SKF fork bushings combine the mechanical strength of steel with the low friction of a PTFE-based self-lubricating sliding layer. The intermediate thin bronze layer creates a strong bond between the backing and sliding surfaces, and improves the dissipation of heat generated during operation. To protect the bearings from corrosion, the steel backing is copper-plated.

The PTFE-based sliding surface permits smooth, low-friction operation for a plush riding feeling. During a short run phase, there will be some transfer of PTFE material from the sliding contact surface to the counter face. After transfer, the characteristic low friction and wear properties of these bushings will be achieved.

Benefits of the fork bushings are:

• maintenance-free operation

• low frictional properties under side load

• high load carrying capacity

• stability at wide operating temperatures

• small operating clearance for improved guidance

• dimensions marking for quick product identification

***NOTE: KIT IS ONE FORK SEAL ONE WIPER MUST ORDER 2EA FOR COMPLETE FORK REBUILD

***NOTE: BUSHINGS ARE SOLD AS EACH

Email Tristana@browardmotorsports.com

Fork Seal Kit

Low friction fork seal solution which improves feel and comfort,

while increasing the reliability through better dirt exclusion.

• 20% Reduction of friction
• Improved feel and smoothness
• Increased life and performance
• Enhanced water and dirt protection
• Reduced wear and air suction
• M X A  5 Star Rated "The added performance gained by the reduction of stiction is icing on the cake. The cake itself is doubling the fork seal life"

H-D Seal Kit

This kit is recommended for extreme mud riding conditions. To safeguard the performance of the fork, SKF recommends replacing oil seal and dirt scraper at the same time. A worn dirt scraper can heavily contribute to reduce the oil seal life time and effectiveness in operation

Dual Compound Seal Kit

Totally NEW DUAL COMPOUND:  Innovative co-molding production technology which is patent pending by SKF. The rubber compounds are new and different from our previous aftermarket green seals. New metal insert and totally re-designed scraping and oil sealing lips. Open wound DS spring: this is not just a stretched std. spring but a dedicated fork seal spring with open winding. Benefits: constant force over time with no accumulation of debris between coils. Improved followability capability of the seals to conform to fork tube deflection. Will not dislodge during pressure washing

• Minimum friction for enhanced riding comfort and compliance
• Improved contamination exclusion
• Stable performance over time
• Extended sealing capability
• Improved durability

SKF PTFE composite fork bushings are the maintenance-free solution in demanding applications such as front fork motorcycle suspensions.

SKF fork bushings combine the mechanical strength of steel with the low friction of a PTFE-based self-lubricating sliding layer. The intermediate thin bronze layer creates a strong bond between the backing and sliding surfaces, and improves the dissipation of heat generated during operation. To protect the bearings from corrosion, the steel backing is copper-plated.

The PTFE-based sliding surface permits smooth, low-friction operation for a plush riding feeling. During a short run phase, there will be some transfer of PTFE material from the sliding contact surface to the counter face. After transfer, the characteristic low friction and wear properties of these bushings will be achieved.

Benefits of the fork bushings are:

• maintenance-free operation

• low frictional properties under side load

• high load carrying capacity

• stability at wide operating temperatures

• small operating clearance for improved guidance

• dimensions marking for quick product identification

***NOTE: KIT IS ONE FORK SEAL ONE WIPER MUST ORDER 2EA FOR COMPLETE FORK REBUILD

***NOTE: BUSHINGS ARE SOLD AS EACH

Email Tristana@browardmotorsports.com

Fork Seal Kit

Low friction fork seal solution which improves feel and comfort,

while increasing the reliability through better dirt exclusion.

• 20% Reduction of friction
• Improved feel and smoothness
• Increased life and performance
• Enhanced water and dirt protection
• Reduced wear and air suction
• M X A  5 Star Rated "The added performance gained by the reduction of stiction is icing on the cake. The cake itself is doubling the fork seal life"

H-D Seal Kit

This kit is recommended for extreme mud riding conditions. To safeguard the performance of the fork, SKF recommends replacing oil seal and dirt scraper at the same time. A worn dirt scraper can heavily contribute to reduce the oil seal life time and effectiveness in operation

Dual Compound Seal Kit

Totally NEW DUAL COMPOUND:  Innovative co-molding production technology which is patent pending by SKF. The rubber compounds are new and different from our previous aftermarket green seals. New metal insert and totally re-designed scraping and oil sealing lips. Open wound DS spring: this is not just a stretched std. spring but a dedicated fork seal spring with open winding. Benefits: constant force over time with no accumulation of debris between coils. Improved followability capability of the seals to conform to fork tube deflection. Will not dislodge during pressure washing

• Minimum friction for enhanced riding comfort and compliance
• Improved contamination exclusion
• Stable performance over time
• Extended sealing capability
• Improved durability

SKF PTFE composite fork bushings are the maintenance-free solution in demanding applications such as front fork motorcycle suspensions.

SKF fork bushings combine the mechanical strength of steel with the low friction of a PTFE-based self-lubricating sliding layer. The intermediate thin bronze layer creates a strong bond between the backing and sliding surfaces, and improves the dissipation of heat generated during operation. To protect the bearings from corrosion, the steel backing is copper-plated.

The PTFE-based sliding surface permits smooth, low-friction operation for a plush riding feeling. During a short run phase, there will be some transfer of PTFE material from the sliding contact surface to the counter face. After transfer, the characteristic low friction and wear properties of these bushings will be achieved.

Benefits of the fork bushings are:

• maintenance-free operation

• low frictional properties under side load

• high load carrying capacity

• stability at wide operating temperatures

• small operating clearance for improved guidance

• dimensions marking for quick product identification

***NOTE: KIT IS ONE FORK SEAL ONE WIPER MUST ORDER 2EA FOR COMPLETE FORK REBUILD

***NOTE: BUSHINGS ARE SOLD AS EACH

Email Tristana@browardmotorsports.com

Fork Seal Kit

Low friction fork seal solution which improves feel and comfort,

while increasing the reliability through better dirt exclusion.

• 20% Reduction of friction
• Improved feel and smoothness
• Increased life and performance
• Enhanced water and dirt protection
• Reduced wear and air suction
• M X A  5 Star Rated "The added performance gained by the reduction of stiction is icing on the cake. The cake itself is doubling the fork seal life"

H-D Seal Kit

This kit is recommended for extreme mud riding conditions. To safeguard the performance of the fork, SKF recommends replacing oil seal and dirt scraper at the same time. A worn dirt scraper can heavily contribute to reduce the oil seal life time and effectiveness in operation

Dual Compound Seal Kit

Totally NEW DUAL COMPOUND:  Innovative co-molding production technology which is patent pending by SKF. The rubber compounds are new and different from our previous aftermarket green seals. New metal insert and totally re-designed scraping and oil sealing lips. Open wound DS spring: this is not just a stretched std. spring but a dedicated fork seal spring with open winding. Benefits: constant force over time with no accumulation of debris between coils. Improved followability capability of the seals to conform to fork tube deflection. Will not dislodge during pressure washing

• Minimum friction for enhanced riding comfort and compliance
• Improved contamination exclusion
• Stable performance over time
• Extended sealing capability
• Improved durability

SKF PTFE composite fork bushings are the maintenance-free solution in demanding applications such as front fork motorcycle suspensions.

SKF fork bushings combine the mechanical strength of steel with the low friction of a PTFE-based self-lubricating sliding layer. The intermediate thin bronze layer creates a strong bond between the backing and sliding surfaces, and improves the dissipation of heat generated during operation. To protect the bearings from corrosion, the steel backing is copper-plated.

The PTFE-based sliding surface permits smooth, low-friction operation for a plush riding feeling. During a short run phase, there will be some transfer of PTFE material from the sliding contact surface to the counter face. After transfer, the characteristic low friction and wear properties of these bushings will be achieved.

Benefits of the fork bushings are:

• maintenance-free operation

• low frictional properties under side load

• high load carrying capacity

• stability at wide operating temperatures

• small operating clearance for improved guidance

• dimensions marking for quick product identification

***NOTE: KIT IS ONE FORK SEAL ONE WIPER MUST ORDER 2EA FOR COMPLETE FORK REBUILD

***NOTE: BUSHINGS ARE SOLD AS EACH

Email Tristana@browardmotorsports.com

Fork Seal Kit

Low friction fork seal solution which improves feel and comfort,

while increasing the reliability through better dirt exclusion.

• 20% Reduction of friction
• Improved feel and smoothness
• Increased life and performance
• Enhanced water and dirt protection
• Reduced wear and air suction
• M X A  5 Star Rated "The added performance gained by the reduction of stiction is icing on the cake. The cake itself is doubling the fork seal life"

H-D Seal Kit

This kit is recommended for extreme mud riding conditions. To safeguard the performance of the fork, SKF recommends replacing oil seal and dirt scraper at the same time. A worn dirt scraper can heavily contribute to reduce the oil seal life time and effectiveness in operation

Dual Compound Seal Kit

Totally NEW DUAL COMPOUND:  Innovative co-molding production technology which is patent pending by SKF. The rubber compounds are new and different from our previous aftermarket green seals. New metal insert and totally re-designed scraping and oil sealing lips. Open wound DS spring: this is not just a stretched std. spring but a dedicated fork seal spring with open winding. Benefits: constant force over time with no accumulation of debris between coils. Improved followability capability of the seals to conform to fork tube deflection. Will not dislodge during pressure washing

• Minimum friction for enhanced riding comfort and compliance
• Improved contamination exclusion
• Stable performance over time
• Extended sealing capability
• Improved durability

SKF PTFE composite fork bushings are the maintenance-free solution in demanding applications such as front fork motorcycle suspensions.

SKF fork bushings combine the mechanical strength of steel with the low friction of a PTFE-based self-lubricating sliding layer. The intermediate thin bronze layer creates a strong bond between the backing and sliding surfaces, and improves the dissipation of heat generated during operation. To protect the bearings from corrosion, the steel backing is copper-plated.

The PTFE-based sliding surface permits smooth, low-friction operation for a plush riding feeling. During a short run phase, there will be some transfer of PTFE material from the sliding contact surface to the counter face. After transfer, the characteristic low friction and wear properties of these bushings will be achieved.

Benefits of the fork bushings are:

• maintenance-free operation

• low frictional properties under side load

• high load carrying capacity

• stability at wide operating temperatures

• small operating clearance for improved guidance

• dimensions marking for quick product identification

***NOTE: KIT IS ONE FORK SEAL ONE WIPER MUST ORDER 2EA FOR COMPLETE FORK REBUILD

***NOTE: BUSHINGS ARE SOLD AS EACH

Email Tristana@browardmotorsports.com

Fork Seal Kit

Low friction fork seal solution which improves feel and comfort,

while increasing the reliability through better dirt exclusion.

• 20% Reduction of friction
• Improved feel and smoothness
• Increased life and performance
• Enhanced water and dirt protection
• Reduced wear and air suction
• M X A  5 Star Rated "The added performance gained by the reduction of stiction is icing on the cake. The cake itself is doubling the fork seal life"

H-D Seal Kit

This kit is recommended for extreme mud riding conditions. To safeguard the performance of the fork, SKF recommends replacing oil seal and dirt scraper at the same time. A worn dirt scraper can heavily contribute to reduce the oil seal life time and effectiveness in operation

Dual Compound Seal Kit

Totally NEW DUAL COMPOUND:  Innovative co-molding production technology which is patent pending by SKF. The rubber compounds are new and different from our previous aftermarket green seals. New metal insert and totally re-designed scraping and oil sealing lips. Open wound DS spring: this is not just a stretched std. spring but a dedicated fork seal spring with open winding. Benefits: constant force over time with no accumulation of debris between coils. Improved followability capability of the seals to conform to fork tube deflection. Will not dislodge during pressure washing

• Minimum friction for enhanced riding comfort and compliance
• Improved contamination exclusion
• Stable performance over time
• Extended sealing capability
• Improved durability

SKF PTFE composite fork bushings are the maintenance-free solution in demanding applications such as front fork motorcycle suspensions.

SKF fork bushings combine the mechanical strength of steel with the low friction of a PTFE-based self-lubricating sliding layer. The intermediate thin bronze layer creates a strong bond between the backing and sliding surfaces, and improves the dissipation of heat generated during operation. To protect the bearings from corrosion, the steel backing is copper-plated.

The PTFE-based sliding surface permits smooth, low-friction operation for a plush riding feeling. During a short run phase, there will be some transfer of PTFE material from the sliding contact surface to the counter face. After transfer, the characteristic low friction and wear properties of these bushings will be achieved.

Benefits of the fork bushings are:

• maintenance-free operation

• low frictional properties under side load

• high load carrying capacity

• stability at wide operating temperatures

• small operating clearance for improved guidance

• dimensions marking for quick product identification

***NOTE: KIT IS ONE FORK SEAL ONE WIPER MUST ORDER 2EA FOR COMPLETE FORK REBUILD

***NOTE: BUSHINGS ARE SOLD AS EACH

Email Tristana@browardmotorsports.com

Fork Seal Kit

Low friction fork seal solution which improves feel and comfort,

while increasing the reliability through better dirt exclusion.

• 20% Reduction of friction
• Improved feel and smoothness
• Increased life and performance
• Enhanced water and dirt protection
• Reduced wear and air suction
• M X A  5 Star Rated "The added performance gained by the reduction of stiction is icing on the cake. The cake itself is doubling the fork seal life"

H-D Seal Kit

This kit is recommended for extreme mud riding conditions. To safeguard the performance of the fork, SKF recommends replacing oil seal and dirt scraper at the same time. A worn dirt scraper can heavily contribute to reduce the oil seal life time and effectiveness in operation

Dual Compound Seal Kit

Totally NEW DUAL COMPOUND:  Innovative co-molding production technology which is patent pending by SKF. The rubber compounds are new and different from our previous aftermarket green seals. New metal insert and totally re-designed scraping and oil sealing lips. Open wound DS spring: this is not just a stretched std. spring but a dedicated fork seal spring with open winding. Benefits: constant force over time with no accumulation of debris between coils. Improved followability capability of the seals to conform to fork tube deflection. Will not dislodge during pressure washing

• Minimum friction for enhanced riding comfort and compliance
• Improved contamination exclusion
• Stable performance over time
• Extended sealing capability
• Improved durability

SKF PTFE composite fork bushings are the maintenance-free solution in demanding applications such as front fork motorcycle suspensions.

SKF fork bushings combine the mechanical strength of steel with the low friction of a PTFE-based self-lubricating sliding layer. The intermediate thin bronze layer creates a strong bond between the backing and sliding surfaces, and improves the dissipation of heat generated during operation. To protect the bearings from corrosion, the steel backing is copper-plated.

The PTFE-based sliding surface permits smooth, low-friction operation for a plush riding feeling. During a short run phase, there will be some transfer of PTFE material from the sliding contact surface to the counter face. After transfer, the characteristic low friction and wear properties of these bushings will be achieved.

Benefits of the fork bushings are:

• maintenance-free operation

• low frictional properties under side load

• high load carrying capacity

• stability at wide operating temperatures

• small operating clearance for improved guidance

• dimensions marking for quick product identification

***NOTE: KIT IS ONE FORK SEAL ONE WIPER MUST ORDER 2EA FOR COMPLETE FORK REBUILD

***NOTE: BUSHINGS ARE SOLD AS EACH

Email Tristana@browardmotorsports.com

Fork Seal Kit

Low friction fork seal solution which improves feel and comfort,

while increasing the reliability through better dirt exclusion.

• 20% Reduction of friction
• Improved feel and smoothness
• Increased life and performance
• Enhanced water and dirt protection
• Reduced wear and air suction
• M X A  5 Star Rated "The added performance gained by the reduction of stiction is icing on the cake. The cake itself is doubling the fork seal life"

H-D Seal Kit

This kit is recommended for extreme mud riding conditions. To safeguard the performance of the fork, SKF recommends replacing oil seal and dirt scraper at the same time. A worn dirt scraper can heavily contribute to reduce the oil seal life time and effectiveness in operation

Dual Compound Seal Kit

Totally NEW DUAL COMPOUND:  Innovative co-molding production technology which is patent pending by SKF. The rubber compounds are new and different from our previous aftermarket green seals. New metal insert and totally re-designed scraping and oil sealing lips. Open wound DS spring: this is not just a stretched std. spring but a dedicated fork seal spring with open winding. Benefits: constant force over time with no accumulation of debris between coils. Improved followability capability of the seals to conform to fork tube deflection. Will not dislodge during pressure washing

• Minimum friction for enhanced riding comfort and compliance
• Improved contamination exclusion
• Stable performance over time
• Extended sealing capability
• Improved durability

SKF PTFE composite fork bushings are the maintenance-free solution in demanding applications such as front fork motorcycle suspensions.

SKF fork bushings combine the mechanical strength of steel with the low friction of a PTFE-based self-lubricating sliding layer. The intermediate thin bronze layer creates a strong bond between the backing and sliding surfaces, and improves the dissipation of heat generated during operation. To protect the bearings from corrosion, the steel backing is copper-plated.

The PTFE-based sliding surface permits smooth, low-friction operation for a plush riding feeling. During a short run phase, there will be some transfer of PTFE material from the sliding contact surface to the counter face. After transfer, the characteristic low friction and wear properties of these bushings will be achieved.

Benefits of the fork bushings are:

• maintenance-free operation

• low frictional properties under side load

• high load carrying capacity

• stability at wide operating temperatures

• small operating clearance for improved guidance

• dimensions marking for quick product identification

***NOTE: KIT IS ONE FORK SEAL ONE WIPER MUST ORDER 2EA FOR COMPLETE FORK REBUILD

***NOTE: BUSHINGS ARE SOLD AS EACH

Email Tristana@browardmotorsports.com

Fork Seal Kit

Low friction fork seal solution which improves feel and comfort,

while increasing the reliability through better dirt exclusion.

• 20% Reduction of friction
• Improved feel and smoothness
• Increased life and performance
• Enhanced water and dirt protection
• Reduced wear and air suction
• M X A  5 Star Rated "The added performance gained by the reduction of stiction is icing on the cake. The cake itself is doubling the fork seal life"

H-D Seal Kit

This kit is recommended for extreme mud riding conditions. To safeguard the performance of the fork, SKF recommends replacing oil seal and dirt scraper at the same time. A worn dirt scraper can heavily contribute to reduce the oil seal life time and effectiveness in operation

Dual Compound Seal Kit

Totally NEW DUAL COMPOUND:  Innovative co-molding production technology which is patent pending by SKF. The rubber compounds are new and different from our previous aftermarket green seals. New metal insert and totally re-designed scraping and oil sealing lips. Open wound DS spring: this is not just a stretched std. spring but a dedicated fork seal spring with open winding. Benefits: constant force over time with no accumulation of debris between coils. Improved followability capability of the seals to conform to fork tube deflection. Will not dislodge during pressure washing

• Minimum friction for enhanced riding comfort and compliance
• Improved contamination exclusion
• Stable performance over time
• Extended sealing capability
• Improved durability

SKF PTFE composite fork bushings are the maintenance-free solution in demanding applications such as front fork motorcycle suspensions.

SKF fork bushings combine the mechanical strength of steel with the low friction of a PTFE-based self-lubricating sliding layer. The intermediate thin bronze layer creates a strong bond between the backing and sliding surfaces, and improves the dissipation of heat generated during operation. To protect the bearings from corrosion, the steel backing is copper-plated.

The PTFE-based sliding surface permits smooth, low-friction operation for a plush riding feeling. During a short run phase, there will be some transfer of PTFE material from the sliding contact surface to the counter face. After transfer, the characteristic low friction and wear properties of these bushings will be achieved.

Benefits of the fork bushings are:

• maintenance-free operation

• low frictional properties under side load

• high load carrying capacity

• stability at wide operating temperatures

• small operating clearance for improved guidance

• dimensions marking for quick product identification

***NOTE: KIT IS ONE FORK SEAL ONE WIPER MUST ORDER 2EA FOR COMPLETE FORK REBUILD

***NOTE: BUSHINGS ARE SOLD AS EACH

Email Tristana@browardmotorsports.com

Fork Seal Kit

Low friction fork seal solution which improves feel and comfort,

while increasing the reliability through better dirt exclusion.

• 20% Reduction of friction
• Improved feel and smoothness
• Increased life and performance
• Enhanced water and dirt protection
• Reduced wear and air suction
• M X A  5 Star Rated "The added performance gained by the reduction of stiction is icing on the cake. The cake itself is doubling the fork seal life"

H-D Seal Kit

This kit is recommended for extreme mud riding conditions. To safeguard the performance of the fork, SKF recommends replacing oil seal and dirt scraper at the same time. A worn dirt scraper can heavily contribute to reduce the oil seal life time and effectiveness in operation

Dual Compound Seal Kit

Totally NEW DUAL COMPOUND:  Innovative co-molding production technology which is patent pending by SKF. The rubber compounds are new and different from our previous aftermarket green seals. New metal insert and totally re-designed scraping and oil sealing lips. Open wound DS spring: this is not just a stretched std. spring but a dedicated fork seal spring with open winding. Benefits: constant force over time with no accumulation of debris between coils. Improved followability capability of the seals to conform to fork tube deflection. Will not dislodge during pressure washing

• Minimum friction for enhanced riding comfort and compliance
• Improved contamination exclusion
• Stable performance over time
• Extended sealing capability
• Improved durability

SKF PTFE composite fork bushings are the maintenance-free solution in demanding applications such as front fork motorcycle suspensions.

SKF fork bushings combine the mechanical strength of steel with the low friction of a PTFE-based self-lubricating sliding layer. The intermediate thin bronze layer creates a strong bond between the backing and sliding surfaces, and improves the dissipation of heat generated during operation. To protect the bearings from corrosion, the steel backing is copper-plated.

The PTFE-based sliding surface permits smooth, low-friction operation for a plush riding feeling. During a short run phase, there will be some transfer of PTFE material from the sliding contact surface to the counter face. After transfer, the characteristic low friction and wear properties of these bushings will be achieved.

Benefits of the fork bushings are:

• maintenance-free operation

• low frictional properties under side load

• high load carrying capacity

• stability at wide operating temperatures

• small operating clearance for improved guidance

• dimensions marking for quick product identification

***NOTE: KIT IS ONE FORK SEAL ONE WIPER MUST ORDER 2EA FOR COMPLETE FORK REBUILD

***NOTE: BUSHINGS ARE SOLD AS EACH

Email Tristana@browardmotorsports.com

Fork Seal Kit

Low friction fork seal solution which improves feel and comfort,

while increasing the reliability through better dirt exclusion.

• 20% Reduction of friction
• Improved feel and smoothness
• Increased life and performance
• Enhanced water and dirt protection
• Reduced wear and air suction
• M X A  5 Star Rated "The added performance gained by the reduction of stiction is icing on the cake. The cake itself is doubling the fork seal life"

H-D Seal Kit

This kit is recommended for extreme mud riding conditions. To safeguard the performance of the fork, SKF recommends replacing oil seal and dirt scraper at the same time. A worn dirt scraper can heavily contribute to reduce the oil seal life time and effectiveness in operation

Dual Compound Seal Kit

Totally NEW DUAL COMPOUND:  Innovative co-molding production technology which is patent pending by SKF. The rubber compounds are new and different from our previous aftermarket green seals. New metal insert and totally re-designed scraping and oil sealing lips. Open wound DS spring: this is not just a stretched std. spring but a dedicated fork seal spring with open winding. Benefits: constant force over time with no accumulation of debris between coils. Improved followability capability of the seals to conform to fork tube deflection. Will not dislodge during pressure washing

• Minimum friction for enhanced riding comfort and compliance
• Improved contamination exclusion
• Stable performance over time
• Extended sealing capability
• Improved durability

SKF PTFE composite fork bushings are the maintenance-free solution in demanding applications such as front fork motorcycle suspensions.

SKF fork bushings combine the mechanical strength of steel with the low friction of a PTFE-based self-lubricating sliding layer. The intermediate thin bronze layer creates a strong bond between the backing and sliding surfaces, and improves the dissipation of heat generated during operation. To protect the bearings from corrosion, the steel backing is copper-plated.

The PTFE-based sliding surface permits smooth, low-friction operation for a plush riding feeling. During a short run phase, there will be some transfer of PTFE material from the sliding contact surface to the counter face. After transfer, the characteristic low friction and wear properties of these bushings will be achieved.

Benefits of the fork bushings are:

• maintenance-free operation

• low frictional properties under side load

• high load carrying capacity

• stability at wide operating temperatures

• small operating clearance for improved guidance

• dimensions marking for quick product identification

***NOTE: KIT IS ONE FORK SEAL ONE WIPER MUST ORDER 2EA FOR COMPLETE FORK REBUILD

***NOTE: BUSHINGS ARE SOLD AS EACH

Email Tristana@browardmotorsports.com

Fork Seal Kit

Low friction fork seal solution which improves feel and comfort,

while increasing the reliability through better dirt exclusion.

• 20% Reduction of friction
• Improved feel and smoothness
• Increased life and performance
• Enhanced water and dirt protection
• Reduced wear and air suction
• M X A  5 Star Rated "The added performance gained by the reduction of stiction is icing on the cake. The cake itself is doubling the fork seal life"

H-D Seal Kit

This kit is recommended for extreme mud riding conditions. To safeguard the performance of the fork, SKF recommends replacing oil seal and dirt scraper at the same time. A worn dirt scraper can heavily contribute to reduce the oil seal life time and effectiveness in operation

Dual Compound Seal Kit

Totally NEW DUAL COMPOUND:  Innovative co-molding production technology which is patent pending by SKF. The rubber compounds are new and different from our previous aftermarket green seals. New metal insert and totally re-designed scraping and oil sealing lips. Open wound DS spring: this is not just a stretched std. spring but a dedicated fork seal spring with open winding. Benefits: constant force over time with no accumulation of debris between coils. Improved followability capability of the seals to conform to fork tube deflection. Will not dislodge during pressure washing

• Minimum friction for enhanced riding comfort and compliance
• Improved contamination exclusion
• Stable performance over time
• Extended sealing capability
• Improved durability

SKF PTFE composite fork bushings are the maintenance-free solution in demanding applications such as front fork motorcycle suspensions.

SKF fork bushings combine the mechanical strength of steel with the low friction of a PTFE-based self-lubricating sliding layer. The intermediate thin bronze layer creates a strong bond between the backing and sliding surfaces, and improves the dissipation of heat generated during operation. To protect the bearings from corrosion, the steel backing is copper-plated.

The PTFE-based sliding surface permits smooth, low-friction operation for a plush riding feeling. During a short run phase, there will be some transfer of PTFE material from the sliding contact surface to the counter face. After transfer, the characteristic low friction and wear properties of these bushings will be achieved.

Benefits of the fork bushings are:

• maintenance-free operation

• low frictional properties under side load

• high load carrying capacity

• stability at wide operating temperatures

• small operating clearance for improved guidance

• dimensions marking for quick product identification

***NOTE: KIT IS ONE FORK SEAL ONE WIPER MUST ORDER 2EA FOR COMPLETE FORK REBUILD

***NOTE: BUSHINGS ARE SOLD AS EACH

Email Tristana@browardmotorsports.com

Fork Seal Kit

Low friction fork seal solution which improves feel and comfort,

while increasing the reliability through better dirt exclusion.

• 20% Reduction of friction
• Improved feel and smoothness
• Increased life and performance
• Enhanced water and dirt protection
• Reduced wear and air suction
• M X A  5 Star Rated "The added performance gained by the reduction of stiction is icing on the cake. The cake itself is doubling the fork seal life"

H-D Seal Kit

This kit is recommended for extreme mud riding conditions. To safeguard the performance of the fork, SKF recommends replacing oil seal and dirt scraper at the same time. A worn dirt scraper can heavily contribute to reduce the oil seal life time and effectiveness in operation

Dual Compound Seal Kit

Totally NEW DUAL COMPOUND:  Innovative co-molding production technology which is patent pending by SKF. The rubber compounds are new and different from our previous aftermarket green seals. New metal insert and totally re-designed scraping and oil sealing lips. Open wound DS spring: this is not just a stretched std. spring but a dedicated fork seal spring with open winding. Benefits: constant force over time with no accumulation of debris between coils. Improved followability capability of the seals to conform to fork tube deflection. Will not dislodge during pressure washing

• Minimum friction for enhanced riding comfort and compliance
• Improved contamination exclusion
• Stable performance over time
• Extended sealing capability
• Improved durability

SKF PTFE composite fork bushings are the maintenance-free solution in demanding applications such as front fork motorcycle suspensions.

SKF fork bushings combine the mechanical strength of steel with the low friction of a PTFE-based self-lubricating sliding layer. The intermediate thin bronze layer creates a strong bond between the backing and sliding surfaces, and improves the dissipation of heat generated during operation. To protect the bearings from corrosion, the steel backing is copper-plated.

The PTFE-based sliding surface permits smooth, low-friction operation for a plush riding feeling. During a short run phase, there will be some transfer of PTFE material from the sliding contact surface to the counter face. After transfer, the characteristic low friction and wear properties of these bushings will be achieved.

Benefits of the fork bushings are:

• maintenance-free operation

• low frictional properties under side load

• high load carrying capacity

• stability at wide operating temperatures

• small operating clearance for improved guidance

• dimensions marking for quick product identification

***NOTE: KIT IS ONE FORK SEAL ONE WIPER MUST ORDER 2EA FOR COMPLETE FORK REBUILD

***NOTE: BUSHINGS ARE SOLD AS EACH

Email Tristana@browardmotorsports.com

Fork Seal Kit

Low friction fork seal solution which improves feel and comfort,

while increasing the reliability through better dirt exclusion.

• 20% Reduction of friction
• Improved feel and smoothness
• Increased life and performance
• Enhanced water and dirt protection
• Reduced wear and air suction
• M X A  5 Star Rated "The added performance gained by the reduction of stiction is icing on the cake. The cake itself is doubling the fork seal life"

H-D Seal Kit

This kit is recommended for extreme mud riding conditions. To safeguard the performance of the fork, SKF recommends replacing oil seal and dirt scraper at the same time. A worn dirt scraper can heavily contribute to reduce the oil seal life time and effectiveness in operation

Dual Compound Seal Kit

Totally NEW DUAL COMPOUND:  Innovative co-molding production technology which is patent pending by SKF. The rubber compounds are new and different from our previous aftermarket green seals. New metal insert and totally re-designed scraping and oil sealing lips. Open wound DS spring: this is not just a stretched std. spring but a dedicated fork seal spring with open winding. Benefits: constant force over time with no accumulation of debris between coils. Improved followability capability of the seals to conform to fork tube deflection. Will not dislodge during pressure washing

• Minimum friction for enhanced riding comfort and compliance
• Improved contamination exclusion
• Stable performance over time
• Extended sealing capability
• Improved durability

SKF PTFE composite fork bushings are the maintenance-free solution in demanding applications such as front fork motorcycle suspensions.

SKF fork bushings combine the mechanical strength of steel with the low friction of a PTFE-based self-lubricating sliding layer. The intermediate thin bronze layer creates a strong bond between the backing and sliding surfaces, and improves the dissipation of heat generated during operation. To protect the bearings from corrosion, the steel backing is copper-plated.

The PTFE-based sliding surface permits smooth, low-friction operation for a plush riding feeling. During a short run phase, there will be some transfer of PTFE material from the sliding contact surface to the counter face. After transfer, the characteristic low friction and wear properties of these bushings will be achieved.

Benefits of the fork bushings are:

• maintenance-free operation

• low frictional properties under side load

• high load carrying capacity

• stability at wide operating temperatures

• small operating clearance for improved guidance

• dimensions marking for quick product identification

***NOTE: KIT IS ONE FORK SEAL ONE WIPER MUST ORDER 2EA FOR COMPLETE FORK REBUILD

***NOTE: BUSHINGS ARE SOLD AS EACH

Email Tristana@browardmotorsports.com

Fork Seal Kit

Low friction fork seal solution which improves feel and comfort,

while increasing the reliability through better dirt exclusion.

• 20% Reduction of friction
• Improved feel and smoothness
• Increased life and performance
• Enhanced water and dirt protection
• Reduced wear and air suction
• M X A  5 Star Rated "The added performance gained by the reduction of stiction is icing on the cake. The cake itself is doubling the fork seal life"

H-D Seal Kit

This kit is recommended for extreme mud riding conditions. To safeguard the performance of the fork, SKF recommends replacing oil seal and dirt scraper at the same time. A worn dirt scraper can heavily contribute to reduce the oil seal life time and effectiveness in operation

Dual Compound Seal Kit

Totally NEW DUAL COMPOUND:  Innovative co-molding production technology which is patent pending by SKF. The rubber compounds are new and different from our previous aftermarket green seals. New metal insert and totally re-designed scraping and oil sealing lips. Open wound DS spring: this is not just a stretched std. spring but a dedicated fork seal spring with open winding. Benefits: constant force over time with no accumulation of debris between coils. Improved followability capability of the seals to conform to fork tube deflection. Will not dislodge during pressure washing

• Minimum friction for enhanced riding comfort and compliance
• Improved contamination exclusion
• Stable performance over time
• Extended sealing capability
• Improved durability

SKF PTFE composite fork bushings are the maintenance-free solution in demanding applications such as front fork motorcycle suspensions.

SKF fork bushings combine the mechanical strength of steel with the low friction of a PTFE-based self-lubricating sliding layer. The intermediate thin bronze layer creates a strong bond between the backing and sliding surfaces, and improves the dissipation of heat generated during operation. To protect the bearings from corrosion, the steel backing is copper-plated.

The PTFE-based sliding surface permits smooth, low-friction operation for a plush riding feeling. During a short run phase, there will be some transfer of PTFE material from the sliding contact surface to the counter face. After transfer, the characteristic low friction and wear properties of these bushings will be achieved.

Benefits of the fork bushings are:

• maintenance-free operation

• low frictional properties under side load

• high load carrying capacity

• stability at wide operating temperatures

• small operating clearance for improved guidance

• dimensions marking for quick product identification

***NOTE: KIT IS ONE FORK SEAL ONE WIPER MUST ORDER 2EA FOR COMPLETE FORK REBUILD

***NOTE: BUSHINGS ARE SOLD AS EACH

Email Tristana@browardmotorsports.com

Low friction fork seal solution which improves feel and comfort,while increasing the reliability through better dirt exclusion.

Email Tristana@browardmotorsports.com

Low friction fork seal solution which improves feel and comfort,while increasing the reliability through better dirt exclusion.

Email Tristana@browardmotorsports.com

Low friction fork seal solution which improves feel and comfort,while increasing the reliability through better dirt exclusion.

Email Tristana@browardmotorsports.com

Low friction fork seal solution which improves feel and comfort,while increasing the reliability through better dirt exclusion.

Email Tristana@browardmotorsports.com

Low friction fork seal solution which improves feel and comfort,while increasing the reliability through better dirt exclusion.

Email Tristana@browardmotorsports.com

Low friction fork seal solution which improves feel and comfort,while increasing the reliability through better dirt exclusion.

Email Tristana@browardmotorsports.com

Low friction fork seal solution which improves feel and comfort,while increasing the reliability through better dirt exclusion.

Email Tristana@browardmotorsports.com

Low friction fork seal solution which improves feel and comfort,while increasing the reliability through better dirt exclusion.

Email Tristana@browardmotorsports.com

Low friction fork seal solution which improves feel and comfort,while increasing the reliability through better dirt exclusion.

Email Tristana@browardmotorsports.com

Low friction fork seal solution which improves feel and comfort,while increasing the reliability through better dirt exclusion.

Email Tristana@browardmotorsports.com

Low friction fork seal solution which improves feel and comfort,while increasing the reliability through better dirt exclusion.

Email Tristana@browardmotorsports.com

Low friction fork seal solution which improves feel and comfort,while increasing the reliability through better dirt exclusion.

Email Tristana@browardmotorsports.com

Low friction fork seal solution which improves feel and comfort,while increasing the reliability through better dirt exclusion.

Email Tristana@browardmotorsports.com

Low friction fork seal solution which improves feel and comfort,while increasing the reliability through better dirt exclusion.

Email Tristana@browardmotorsports.com

Low friction fork seal solution which improves feel and comfort,while increasing the reliability through better dirt exclusion.

Email Tristana@browardmotorsports.com

Low friction fork seal solution which improves feel and comfort,while increasing the reliability through better dirt exclusion.

Email Tristana@browardmotorsports.com

Low friction fork seal solution which improves feel and comfort,while increasing the reliability through better dirt exclusion.

Email Tristana@browardmotorsports.com

Low friction fork seal solution which improves feel and comfort,while increasing the reliability through better dirt exclusion.

Email Tristana@browardmotorsports.com

Low friction fork seal solution which improves feel and comfort,while increasing the reliability through better dirt exclusion.

Email Tristana@browardmotorsports.com

Low friction fork seal solution which improves feel and comfort,while increasing the reliability through better dirt exclusion.

Email Tristana@browardmotorsports.com