• kits contains all bearings & seals required to re-fit a wheel
• the most extensive line of kits for off-road applications
• wheel bearings typically fail from water and dirt contamination. the all balls wheel bearing was developed in partnership with kml bearing and is designed for the difficult operating environment of the power sport industry
• premium emq quality, hi-speed bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and improved grease retention
• type tc nitrile elastomer wheel seals are specifically designed to keep out water and dirt
• rubber coated outside diameter creates an optimum seal at hub
• steel garter spring guarantees constant pressure on the axle shaft over the life of the seal

Email Tristana@browardmotorsports.com

• kits contains all bearings & seals required to re-fit a wheel
• the most extensive line of kits for off-road applications
• wheel bearings typically fail from water and dirt contamination. the all balls wheel bearing was developed in partnership with kml bearing and is designed for the difficult operating environment of the power sport industry
• premium emq quality, hi-speed bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and improved grease retention
• type tc nitrile elastomer wheel seals are specifically designed to keep out water and dirt
• rubber coated outside diameter creates an optimum seal at hub
• steel garter spring guarantees constant pressure on the axle shaft over the life of the seal

Email Tristana@browardmotorsports.com

• kits contains all bearings & seals required to re-fit a wheel
• the most extensive line of kits for off-road applications
• wheel bearings typically fail from water and dirt contamination. the all balls wheel bearing was developed in partnership with kml bearing and is designed for the difficult operating environment of the power sport industry
• premium emq quality, hi-speed bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and improved grease retention
• type tc nitrile elastomer wheel seals are specifically designed to keep out water and dirt
• rubber coated outside diameter creates an optimum seal at hub
• steel garter spring guarantees constant pressure on the axle shaft over the life of the seal

Email Tristana@browardmotorsports.com

• kits contains all bearings & seals required to re-fit a wheel
• the most extensive line of kits for off-road applications
• wheel bearings typically fail from water and dirt contamination. the all balls wheel bearing was developed in partnership with kml bearing and is designed for the difficult operating environment of the power sport industry
• premium emq quality, hi-speed bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and improved grease retention
• type tc nitrile elastomer wheel seals are specifically designed to keep out water and dirt
• rubber coated outside diameter creates an optimum seal at hub
• steel garter spring guarantees constant pressure on the axle shaft over the life of the seal

Email Tristana@browardmotorsports.com

• kits contains all bearings & seals required to re-fit a wheel
• the most extensive line of kits for off-road applications
• wheel bearings typically fail from water and dirt contamination. the all balls wheel bearing was developed in partnership with kml bearing and is designed for the difficult operating environment of the power sport industry
• premium emq quality, hi-speed bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and improved grease retention
• type tc nitrile elastomer wheel seals are specifically designed to keep out water and dirt
• rubber coated outside diameter creates an optimum seal at hub
• steel garter spring guarantees constant pressure on the axle shaft over the life of the seal

Email Tristana@browardmotorsports.com

• kits contains all bearings & seals required to re-fit a wheel
• the most extensive line of kits for off-road applications
• wheel bearings typically fail from water and dirt contamination. the all balls wheel bearing was developed in partnership with kml bearing and is designed for the difficult operating environment of the power sport industry
• premium emq quality, hi-speed bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and improved grease retention
• type tc nitrile elastomer wheel seals are specifically designed to keep out water and dirt
• rubber coated outside diameter creates an optimum seal at hub
• steel garter spring guarantees constant pressure on the axle shaft over the life of the seal

Email Tristana@browardmotorsports.com

• kits contains all bearings & seals required to re-fit a wheel
• the most extensive line of kits for off-road applications
• wheel bearings typically fail from water and dirt contamination. the all balls wheel bearing was developed in partnership with kml bearing and is designed for the difficult operating environment of the power sport industry
• premium emq quality, hi-speed bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and improved grease retention
• type tc nitrile elastomer wheel seals are specifically designed to keep out water and dirt
• rubber coated outside diameter creates an optimum seal at hub
• steel garter spring guarantees constant pressure on the axle shaft over the life of the seal

Email Tristana@browardmotorsports.com

• kits contains all bearings & seals required to re-fit a wheel
• the most extensive line of kits for off-road applications
• wheel bearings typically fail from water and dirt contamination. the all balls wheel bearing was developed in partnership with kml bearing and is designed for the difficult operating environment of the power sport industry
• premium emq quality, hi-speed bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and improved grease retention
• type tc nitrile elastomer wheel seals are specifically designed to keep out water and dirt
• rubber coated outside diameter creates an optimum seal at hub
• steel garter spring guarantees constant pressure on the axle shaft over the life of the seal

Email Tristana@browardmotorsports.com

• Designed for use on 2000 and later HD models
• Includes 2" O.D. driver, 1", 3/4" and 25 mm I.D. drivers
• Adapters can be changed quickly to accommodate a wide range of bearing combinations
• Durable steel handle and anodized aluminum drivers
• Can be used with a hammer or shop press
• Laser etched adapters for easy identification
• Includes convenient molded tray for storage

Email Tristana@browardmotorsports.com

Cast Aluminum or Iron to match OEM materials.

• Includes bare hub without studs. Stud kits available separately.
• Reduces looseness in the wheel assembly caused by wear, even after new wheel bearing installation
• Restores tolerances and reduces play on bearing mating surfaces
• Replacing bent or damaged hubs restores that factory-smooth ride

Email Tristana@browardmotorsports.com

Cast Aluminum or Iron to match OEM materials.

• Includes bare hub without studs. Stud kits available separately.
• Reduces looseness in the wheel assembly caused by wear, even after new wheel bearing installation
• Restores tolerances and reduces play on bearing mating surfaces
• Replacing bent or damaged hubs restores that factory-smooth ride

Email Tristana@browardmotorsports.com

Cast Aluminum or Iron to match OEM materials.

• Includes bare hub without studs. Stud kits available separately.
• Reduces looseness in the wheel assembly caused by wear, even after new wheel bearing installation
• Restores tolerances and reduces play on bearing mating surfaces
• Replacing bent or damaged hubs restores that factory-smooth ride

Email Tristana@browardmotorsports.com

Cast Aluminum or Iron to match OEM materials.

• Includes bare hub without studs. Stud kits available separately.
• Reduces looseness in the wheel assembly caused by wear, even after new wheel bearing installation
• Restores tolerances and reduces play on bearing mating surfaces
• Replacing bent or damaged hubs restores that factory-smooth ride

Email Tristana@browardmotorsports.com

Cast Aluminum or Iron to match OEM materials.

• Includes bare hub without studs. Stud kits available separately.
• Reduces looseness in the wheel assembly caused by wear, even after new wheel bearing installation
• Restores tolerances and reduces play on bearing mating surfaces
• Replacing bent or damaged hubs restores that factory-smooth ride

Email Tristana@browardmotorsports.com

Cast Aluminum or Iron to match OEM materials.

• Includes bare hub without studs. Stud kits available separately.
• Reduces looseness in the wheel assembly caused by wear, even after new wheel bearing installation
• Restores tolerances and reduces play on bearing mating surfaces
• Replacing bent or damaged hubs restores that factory-smooth ride

Email Tristana@browardmotorsports.com

Cast Aluminum or Iron to match OEM materials.

• Includes bare hub without studs. Stud kits available separately.
• Reduces looseness in the wheel assembly caused by wear, even after new wheel bearing installation
• Restores tolerances and reduces play on bearing mating surfaces
• Replacing bent or damaged hubs restores that factory-smooth ride

Email Tristana@browardmotorsports.com

Cast Aluminum or Iron to match OEM materials.

• Includes bare hub without studs. Stud kits available separately.
• Reduces looseness in the wheel assembly caused by wear, even after new wheel bearing installation
• Restores tolerances and reduces play on bearing mating surfaces
• Replacing bent or damaged hubs restores that factory-smooth ride

Email Tristana@browardmotorsports.com

Cast Aluminum or Iron to match OEM materials.

• Includes bare hub without studs. Stud kits available separately.
• Reduces looseness in the wheel assembly caused by wear, even after new wheel bearing installation
• Restores tolerances and reduces play on bearing mating surfaces
• Replacing bent or damaged hubs restores that factory-smooth ride

Email Tristana@browardmotorsports.com

Cast Aluminum or Iron to match OEM materials.

• Includes bare hub without studs. Stud kits available separately.
• Reduces looseness in the wheel assembly caused by wear, even after new wheel bearing installation
• Restores tolerances and reduces play on bearing mating surfaces
• Replacing bent or damaged hubs restores that factory-smooth ride

Email Tristana@browardmotorsports.com

Cast Aluminum or Iron to match OEM materials.

• Includes bare hub without studs. Stud kits available separately.
• Reduces looseness in the wheel assembly caused by wear, even after new wheel bearing installation
• Restores tolerances and reduces play on bearing mating surfaces
• Replacing bent or damaged hubs restores that factory-smooth ride

Email Tristana@browardmotorsports.com

Cast Aluminum or Iron to match OEM materials.

• Includes bare hub without studs. Stud kits available separately.
• Reduces looseness in the wheel assembly caused by wear, even after new wheel bearing installation
• Restores tolerances and reduces play on bearing mating surfaces
• Replacing bent or damaged hubs restores that factory-smooth ride

Email Tristana@browardmotorsports.com

Cast Aluminum or Iron to match OEM materials.

• Includes bare hub without studs. Stud kits available separately.
• Reduces looseness in the wheel assembly caused by wear, even after new wheel bearing installation
• Restores tolerances and reduces play on bearing mating surfaces
• Replacing bent or damaged hubs restores that factory-smooth ride

Email Tristana@browardmotorsports.com

Cast Aluminum or Iron to match OEM materials.

• Includes bare hub without studs. Stud kits available separately.
• Reduces looseness in the wheel assembly caused by wear, even after new wheel bearing installation
• Restores tolerances and reduces play on bearing mating surfaces
• Replacing bent or damaged hubs restores that factory-smooth ride

Email Tristana@browardmotorsports.com