• ALL BALLS starter motors are manufactured with all new components that have been fine-tuned for starting the H-D V-Twin engine
• All starters are supplied with a 10/32 threaded output shaft, and a conversion bolt for the earlier 1/4-20 threaded output shafts to cover all Big Twins from 1989 thru 2005
• Idler gears are manufactured from cold-heated steel
• End frames are cold-chamber die cast and machined on precision fixtures
• Armature hairpins are resistance-fused to the commutator
• Our clutches utilize 20% oversize rollers
• Hitachi Starter is 5.25" overall length. 
• Prestolite Starter is 6" overall length. 
• Limited Lifetime Warranty 

* NOTE: To maintain warranty All Balls Hi-Torq starters, you must run a #4 gauge battery cable set, due to the increased performance.

Email Tristana@browardmotorsports.com

• ALL BALLS starter motors are manufactured with all new components that have been fine-tuned for starting the H-D V-Twin engine
• All starters are supplied with a 10/32 threaded output shaft, and a conversion bolt for the earlier 1/4-20 threaded output shafts to cover all Big Twins from 1989 thru 2005
• Idler gears are manufactured from cold-heated steel
• End frames are cold-chamber die cast and machined on precision fixtures
• Armature hairpins are resistance-fused to the commutator
• Our clutches utilize 20% oversize rollers
• Hitachi Starter is 5.25" overall length. 
• Prestolite Starter is 6" overall length. 
• Limited Lifetime Warranty 

* NOTE: To maintain warranty All Balls Hi-Torq starters, you must run a #4 gauge battery cable set, due to the increased performance.

Email Tristana@browardmotorsports.com

• ALL BALLS starter motors are manufactured with all new components that have been fine-tuned for starting the H-D V-Twin engine
• All starters are supplied with a 10/32 threaded output shaft, and a conversion bolt for the earlier 1/4-20 threaded output shafts to cover all Big Twins from 1989 thru 2005
• Idler gears are manufactured from cold-heated steel
• End frames are cold-chamber die cast and machined on precision fixtures
• Armature hairpins are resistance-fused to the commutator
• Our clutches utilize 20% oversize rollers
• Hitachi Starter is 5.25" overall length. 
• Prestolite Starter is 6" overall length. 
• Limited Lifetime Warranty 

* NOTE: To maintain warranty All Balls Hi-Torq starters, you must run a #4 gauge battery cable set, due to the increased performance.

Email Tristana@browardmotorsports.com

• ALL BALLS starter motors are manufactured with all new components that have been fine-tuned for starting the H-D V-Twin engine
• All starters are supplied with a 10/32 threaded output shaft, and a conversion bolt for the earlier 1/4-20 threaded output shafts to cover all Big Twins from 1989 thru 2005
• Idler gears are manufactured from cold-heated steel
• End frames are cold-chamber die cast and machined on precision fixtures
• Armature hairpins are resistance-fused to the commutator
• Our clutches utilize 20% oversize rollers
• Hitachi Starter is 5.25" overall length. 
• Prestolite Starter is 6" overall length. 
• Limited Lifetime Warranty 

* NOTE: To maintain warranty All Balls Hi-Torq starters, you must run a #4 gauge battery cable set, due to the increased performance.

Email Tristana@browardmotorsports.com

• ALL BALLS starter motors are manufactured with all new components that have been fine-tuned for starting the H-D V-Twin engine
• All starters are supplied with a 10/32 threaded output shaft, and a conversion bolt for the earlier 1/4-20 threaded output shafts to cover all Big Twins from 1989 thru 2005
• Idler gears are manufactured from cold-heated steel
• End frames are cold-chamber die cast and machined on precision fixtures
• Armature hairpins are resistance-fused to the commutator
• Our clutches utilize 20% oversize rollers
• Hitachi Starter is 5.25" overall length. 
• Prestolite Starter is 6" overall length. 
• Limited Lifetime Warranty 

* NOTE: To maintain warranty All Balls Hi-Torq starters, you must run a #4 gauge battery cable set, due to the increased performance.

Email Tristana@browardmotorsports.com

• ALL BALLS starter motors are manufactured with all new components that have been fine-tuned for starting the H-D V-Twin engine
• All starters are supplied with a 10/32 threaded output shaft, and a conversion bolt for the earlier 1/4-20 threaded output shafts to cover all Big Twins from 1989 thru 2005
• Idler gears are manufactured from cold-heated steel
• End frames are cold-chamber die cast and machined on precision fixtures
• Armature hairpins are resistance-fused to the commutator
• Our clutches utilize 20% oversize rollers
• Hitachi Starter is 5.25" overall length. 
• Prestolite Starter is 6" overall length. 
• Limited Lifetime Warranty 

* NOTE: To maintain warranty All Balls Hi-Torq starters, you must run a #4 gauge battery cable set, due to the increased performance.

Email Tristana@browardmotorsports.com

• ALL BALLS starter motors are manufactured with all new components that have been fine-tuned for starting the H-D V-Twin engine
• All starters are supplied with a 10/32 threaded output shaft, and a conversion bolt for the earlier 1/4-20 threaded output shafts to cover all Big Twins from 1989 thru 2005
• Idler gears are manufactured from cold-heated steel
• End frames are cold-chamber die cast and machined on precision fixtures
• Armature hairpins are resistance-fused to the commutator
• Our clutches utilize 20% oversize rollers
• Hitachi Starter is 5.25" overall length. 
• Prestolite Starter is 6" overall length. 
• Limited Lifetime Warranty 

* NOTE: To maintain warranty All Balls Hi-Torq starters, you must run a #4 gauge battery cable set, due to the increased performance.

Email Tristana@browardmotorsports.com

• ALL BALLS starter motors are manufactured with all new components that have been fine-tuned for starting the H-D V-Twin engine
• All starters are supplied with a 10/32 threaded output shaft, and a conversion bolt for the earlier 1/4-20 threaded output shafts to cover all Big Twins from 1989 thru 2005
• Idler gears are manufactured from cold-heated steel
• End frames are cold-chamber die cast and machined on precision fixtures
• Armature hairpins are resistance-fused to the commutator
• Our clutches utilize 20% oversize rollers
• Hitachi Starter is 5.25" overall length. 
• Prestolite Starter is 6" overall length. 
• Limited Lifetime Warranty 

* NOTE: To maintain warranty All Balls Hi-Torq starters, you must run a #4 gauge battery cable set, due to the increased performance.

Email Tristana@browardmotorsports.com

• ALL BALLS starter motors are manufactured with all new components that have been fine-tuned for starting the H-D V-Twin engine
• All starters are supplied with a 10/32 threaded output shaft, and a conversion bolt for the earlier 1/4-20 threaded output shafts to cover all Big Twins from 1989 thru 2005
• Idler gears are manufactured from cold-heated steel
• End frames are cold-chamber die cast and machined on precision fixtures
• Armature hairpins are resistance-fused to the commutator
• Our clutches utilize 20% oversize rollers
• Hitachi Starter is 5.25" overall length. 
• Prestolite Starter is 6" overall length. 
• Limited Lifetime Warranty 

* NOTE: To maintain warranty All Balls Hi-Torq starters, you must run a #4 gauge battery cable set, due to the increased performance.

Email Tristana@browardmotorsports.com

• Direct O.E.M. replacement
• 2 Year limited warranty against manufacturer defects
• Warranty does NOT cover water ingestion from submersion of starter motor
• Parts kit includes necessary components needed to rebuild the starter including brushes (does not include drive assembly)
• NOTE: WPS# 26-1121 has a 9 tooth drive gear and WPS# 26-1132 has 8 tooth drive gear for Sea-Doo 800 models, verify fitment prior to ordering

Email Tristana@browardmotorsports.com

• Direct O.E.M. replacement
• 2 Year limited warranty against manufacturer defects
• Warranty does NOT cover water ingestion from submersion of starter motor
• Parts kit includes necessary components needed to rebuild the starter including brushes (does not include drive assembly)
• NOTE: WPS# 26-1121 has a 9 tooth drive gear and WPS# 26-1132 has 8 tooth drive gear for Sea-Doo 800 models, verify fitment prior to ordering

Email Tristana@browardmotorsports.com

• Direct O.E.M. replacement
• 2 Year limited warranty against manufacturer defects
• Warranty does NOT cover water ingestion from submersion of starter motor
• Parts kit includes necessary components needed to rebuild the starter including brushes (does not include drive assembly)
• NOTE: WPS# 26-1121 has a 9 tooth drive gear and WPS# 26-1132 has 8 tooth drive gear for Sea-Doo 800 models, verify fitment prior to ordering

Email Tristana@browardmotorsports.com