Email Tristana@browardmotorsports.com

• Fits 2014 KTM XC models and all 2013-2014 Husaberg with WP 4860 4CS forks
• For removing and installing LH and RH adjustable fork caps
• Allows you to properly torque the fork cap assemblies during installation
• 17 mm hex head
• Made from billet 6061 T-6 aluminum

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Fork Cap Tool for Showa SFF, 50mm

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

• KNURLED BEARING MOUNTED SPINNER PROVIDES FASTER AND EASIER REMOVAL AND INSTALLATION OF NUTS AND BOLTS
• PADDED GRIP HANDLE
• LIFETIME REPLACEMENT WARRANTY

Email Tristana@browardmotorsports.com

• Hard nickel pewter finish
• Sold individually

Email Tristana@browardmotorsports.com

Wheel Bearing Driver Set

• Fits bearing with 12-25 mm I.D. and 32-47 mm O.D.
• Adapters can be changed quickly to accommodate a wide range of bearing combinations
• Durable steel handle and anodized aluminum drivers
• Can be used with a hammer or shop press
• Laser etched adapters for easy identification
• Comes with protective blow molded case

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

• Used to remove exhaust pipe springs, seat or tank holding springs, cotter pins, side stand springs and other parts
• Made in U.S.A.

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

• Innovative dual-use design combines 6 tools into one
• 8mm, 10mm and 12mm hex socket
• 4mm, 5mm and 6mm hex drive
• Padded Y-shape for excellent grip and leverage
• Compact design is ideal for trail tool packs
• Chrome-Vanadium tool steel
• Limited lifetime warranty

Email Tristana@browardmotorsports.com

• Protects rim from damage from tire levers during tire changes
• Dual raised beads facilitate inserting tire lever under tire bead and prevents tire lever from slipping
• Durable nylon construction won’t mar wheels
• Hand holds make it easy to insert and remove
• Long apron protects hands and spokes
• Patent pending

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Axis Truing-Balance Stand

• Precision built tool for building, truing, and balancing wheels
• Innovative single sided design allows easy access to spokes and nipples
• High quality bearings allow precise wheel balancing
• 15 mm axle fits most modern street and dirt bikes and many mini bikes
• Hub cones hold wheel firmly in place
• Adjustable pointer for truing wheels
• Simple folding design for easy storage when not in use
• Can be used with dial indicators (not included)
• Durable powder coat finish

Email Tristana@browardmotorsports.com

• Precision machined from the finest quality materials
• For professional and serious home service use
• Packaged individually on skin pack display card
• It is recommended to measure the flywheel threads prior to ordering if the exact year/model of motorcycle is not listed

Email Tristana@browardmotorsports.com

• For removing the fork cap and compression cartridge on twin chamber forks found on late model off-road motorcycles
• Outer ring fits 49 mm octagonal fork cap
• Inner body holds cartridge so it can be removed from fork cap
• Outer ring can be clamped in vise to hold fork cap securely while cartridge is being removed
• Provides more secure grip on fork cap and cartridge and reduces risk of damage during disassembly
• Easier and faster to use than any other tool now available
• Billet 6061 aluminum construction with anodized blue finish
• 1/2 inch square drive
• Limited lifetime warranty
• Patent pending
• Made in USA

Email Tristana@browardmotorsports.com

• Unique combination wrench design has 3-sided open end and semi-closed end
• Use open end for quick adjustment of spoke nipples and semi-closed end for those hard to turn nipples that require more torque
• Specially designed ergonomic handle allows larger turning radius and excellent grip and feel
• Polished finish with laser engraved logo and size markings
• Limited life time warranty
• Patent pending

Spline Drive

• Unique combination wrench design has open end and semi-closed end designed to fit spline drive spoke nipples
• Use open end for quick adjustment of spoke nipples and semi-closed end for those hard to turn nipples that require more torque

Email Tristana@browardmotorsports.com

• Innovative multi-use tire tool set
• Breaks the bead on most street and off road motorcycle tires
• Integrated tire spoons for tire removal and installation
• Light weight and compact size is perfect for tool packs
• Ergonomic handles with crossguard to keep hand from riding forward
• Forged 7075-T6 aluminum or Forged construction for strength and durability
• Black anodized finish
• Patent pending

Email Tristana@browardmotorsports.com

• Innovative design makes tool easier and safer to use than old fashioned pin aligned drivers
• Anodized aluminum locking ring features knurled finish for secure no-slip grip and positively locks body halves together during use
• No more worrying about part of the tool falling off and damaging the fork leg or hitting your feet
• Perfectly weighted to drive seals
• Body halves are machined from durable carbon steel and feature high quality protective black e-coat with laser engraved markings
• Lifetime warranty
• Patent pending

Email Tristana@browardmotorsports.com

• Combines wrench and bleeder valve into one convenient and compact tool
• Fits most 8mm bleeder nipples
• Bleeds brake systems and hydraulic clutch systems
• Internal check valve for fast easy bleeding
• Anodized billet aluminum handle with chrome moly steel body
• Compact size for tight spaces
• High quality internal seal
• Multi position handle

Email Tristana@browardmotorsports.com

• Made from heat-treated steel
• ATV sets Includes a 1/2”- drive slot for use with a torque wrench or breaker bar

Email Tristana@browardmotorsports.com

• Double ended design for ultimate versatility
• Curved spade for the big stuff
• Brush head to clean controls and radiator
• Pointed tip for foot pegs and hard to reach places
• Made of durable ABS plastic
• Patent pending design

Email Tristana@browardmotorsports.com

• Used to remove aluminum fork cap on Showa BPF forks
• Fits 45mm fork cap hex
• Durable blue anodized finish

Email Tristana@browardmotorsports.com

• Interchangeable piston adapters for use on both long skirt and short skirt (slipper) pistons
• Fits all piston pins from 12 mm (1/2”) to 24 mm (1”)
• Made of 6061 aluminum with non-marring aluminum adapters and durable blue anodized finish
• Patent pending

Email Tristana@browardmotorsports.com

• Used to push the tire bead down into the drop center
• Hooks over spoke and pushes bead down on opposite side
• No more fighting to keep bead down while installing tires

Email Tristana@browardmotorsports.com

PRESS, BREAK, RIVET

Email Tristana@browardmotorsports.com

• These super-light wrenches weigh less than one quarter of the weight of standard steel wrenches
• Made from tool grade titanium alloy
• Extremely lightweight and compact design is perfect for trail tool packs
• Titanium alloy will never rust or corrode
• Sets includes 8mm, 10mm, 12mm, and 13mm or 8mm,10mm,12mm and 14mm wrenches

Email Tristana@browardmotorsports.com

• These super-light wrenches weigh less than one quarter of the weight of standard steel wrenches
• Made from tool grade titanium alloy
• Extremely lightweight and compact design is perfect for trail tool packs
• Titanium alloy will never rust or corrode
• Sets includes 8mm, 10mm, 12mm, and 13mm or 8mm,10mm,12mm and 14mm wrenches

Email Tristana@browardmotorsports.com

• For removing and installing the compression valve assembly from the fork cap
• KTM ‘07-08 SX/SXF, ‘08 XC/XCF, ‘08 690 RFR
• 17mm hex head
• Made from billet 6061 T-6 aluminum

Email Tristana@browardmotorsports.com

• For mounting 57-8114 T-handle rack to the side of a toolbox, wall, post or any other flat surface
• Features a quick release pin for removing and attaching the T-handle rack
• Includes built-in bottle opener
• Made from heavy-duty 12 gauge zinc plated steel
• Designed for use on Motion Pro’s new one piece T-handle rack
• Made in USA

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

• 49mm, 8 point box wrench for removing the fork cap (cartridge)

on dual chamber closed cartridge forks on most late-model Yamaha's
& Honda's

• 50mm, 6 point box wrench for removing the fork cap (cartridge)

on WP 4860 MXMA dual chamber closed cartridge (WP USD 48
mm) forks on late-model KTM's

• 12mm slot for holding the damper rod for removing the rebound

bolt, this allows for the removal of the cartridge from the lower
fork leg

• 50mm/14mm for use on Showa 49mm twin chamber MX forks
• Made of billet 6061-T6 and anodized Motion Pro blue

Email Tristana@browardmotorsports.com

• Quick and easy to use tool for aligning front forks to ensure they are parallel from top to bottom
• Proper alignment reduces sticking, enhancing fork performance
• Knurled adjustment screws for easy setup
• Reduces seal and bushing wear
• Will work on 27mm - 62mm fork legs and tubes
• Works on forks that are 140mm to 220mm on center
• Patent pending

Email Tristana@browardmotorsports.com

• Set uses a split collet design to remove radial ball bearings on Harley-Davidson and American V-Twin motorcycles
• 57-8410 kit includes large driver, 3/4", 1" and 25mm collets
• All 2007 Softail models (exc.Springer models) use a 25mm radial ball bearing on the front wheel

Email Tristana@browardmotorsports.com

Use T-handle drive to tighten/loosen fasteners and shaft drive for quick installation/removal of fasteners

Email Tristana@browardmotorsports.com

• Assists in pushing the tire bead down into the drop center of the rim while using tire tools to change tires
• Light weight and compact enough for any tool pack
• Delrin securing thumb screw keeps rims scar free
• Not recommended for users of Bib Mousse type off-road tubes

Email Tristana@browardmotorsports.com

• Hard nickel pewter finish
• Sold individually

Email Tristana@browardmotorsports.com

• Torque any fastener with a combination wrench or Allen wrench
• Will work with 6mm (1/4”) through 19,, (3/4”) combination wrenches
• Heat treated steel with black oxide finish
• 3/8” square drive is rated for a maximum torque of 90 ft-lbs.

Email Tristana@browardmotorsports.com

• Use T-handle hex to tighten/loosen fasteners and ball-end hex on shaft for quick installation/removal of fasteners
• Ball-end allows for better access to hard to reach Allen-head bolts (up to 25-degree working angle)
• Compact 6-3/4” shaft fits in tight spaces and is easy to carry
• Chrome-vanadium tool steel shaft and T-handle
• Durable nickel pewter finish
• Lifetime replacement warranty

Email Tristana@browardmotorsports.com

• For removing the compression valve from CARTRIDGE
• 19mm Drive HEX/36mm octagon
• Billet 6061 T-6 Aluminum

Email Tristana@browardmotorsports.com

• For use on Softail, Sportster, and Dyna
• Designed to help set rear wheel alignment
• Fast, accurate and easy to use
• Eliminates the need to use a tape measure
• Proper wheel alignment extends chain/sprocket and belt life

Email Tristana@browardmotorsports.com

• Designed to remove 17mm float bowl drain plugs
• Made from light-weight 6061 T-6
• Compact design to carry in tool pack
• 12 point hex and low profile design for tight access

Email Tristana@browardmotorsports.com

• Use T-Handle drive to tighten/loosen fasteners and shaft drive for quick installation/removal of fasteners  
• 1/4” drive has a compact 6 1/2” drive shaft length
• 3/8” drive has a compact 7 3/4” drive shaft length
• For tight access and easy transport
• Use with 1/4” or 3/8” drive sockets, hex drives, swivels, etc.
• Chrome-vanadium tool steel shaft and T-Handle
• Durable nickel pewter finish
• Lifetime replacement warranty

Email Tristana@browardmotorsports.com

• Easy way to keep your fork seals clean and debris free
• Extract dirt or debris trapped between fork seal and tube
• Will work on conventional and up-side down forks

Email Tristana@browardmotorsports.com

• For use on big twin (excluding twin cam) with slotted screw tappet oil filter screen cover
• Designed for use with 7/16" combination wrench to allow for maximum rotation without touching engine cases
• O-ring design retains the tool in wrench or socket
• Flange design allows downward force to be applied to tool
• Can be used without removing exhaust pipes on most bikes
• Tappets should be serviced every oil change

Email Tristana@browardmotorsports.com

• Designed for quick and easy removal and precise installation of suspension linkage and swing arm pivot bearings
• For use on 20 & 22mm id bearings
• Fits most off-road motorcycles and ATV’s
• Includes blind bearing collet for removal of 20mm blind bearings (other sizes available)
• Includes blind bearing puller adaptor (p/n C08-0294J), which can also be used as an accessory with the Motion Pro blind bearing remover set (WPS# 57-8292)
• Anodized aluminum mandrels reduce the possibility of damaging bearing surfaces
• Laser etched markings for easy size identification
• Eliminates the need for a shop press
• Protective blow-molded case for easy storage

Email Tristana@browardmotorsports.com

• 22mm hex and 3/8" square drive
• This tool allows removal and replacement of the accessory fork cap KTM part # 48600074S
• The tool is slotted to allow removal and replacement of caps with the Micro or Pro Bleeders (see page 741)

Email Tristana@browardmotorsports.com

• Allows removal of internal snap rings used in hydraulic master cylinders
• Replaces 07914-SA50001 and AKS-316-2010
• Can be used to remove and replace small to medium internal snap rings up to 50mm deep, including those used for transmission gear locating, bearing retention, and seal retention
• Applicable to some fork seal retaining rings

Email Tristana@browardmotorsports.com

• Keeps flywheels, rotors, and sprockets from rotating during removal and installation
• Holds sprockets and rotors with holes center to center at a minimum distance of 13mm and a maximum distance of 230mm
• Features 5 and 9mm pins
• Adjustable stop-screw keeps tool open at set distance

Email Tristana@browardmotorsports.com

• Dependable split collet design
• 8 piece metric set includes large and small drivers, 10mm, 12mm, 15mm, 17mm, 20mm, and 25mm removers
• Includes new metric size to allow use with recent MX and Euro motorcycles

Email Tristana@browardmotorsports.com

• Dependable split collet design
• 8 piece metric set includes large and small drivers, 10mm, 12mm, 15mm, 17mm, 20mm, and 25mm removers
• Includes new metric size to allow use with recent MX and Euro motorcycles

Email Tristana@browardmotorsports.com

• Dependable split collet design
• 8 piece metric set includes large and small drivers, 10mm, 12mm, 15mm, 17mm, 20mm, and 25mm removers
• Includes new metric size to allow use with recent MX and Euro motorcycles

Email Tristana@browardmotorsports.com

• Precision machined from the finest quality materials
• For professional and serious home service use
• Packaged individually on skin pack display card
• It is recommended to measure the flywheel threads prior to ordering if the exact year/model of motorcycle is not listed

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

• Precision made of high grade aluminum and stainless steel
• Designed for hard to reach pilot air screws
• Gear driven 1/4" hex, 17.5" long
• Includes five hex drive bits - straight slot, phillips, D-shaped pilot screw bit, 6mm hex jet bit and 1/4" hex to 1/4" drive bit
• Strongest tool of its type on the market
• Max torque is 50 inch-lb

Email Tristana@browardmotorsports.com

• Precision made of high grade aluminum and stainless steel
• Designed for hard to reach pilot air screws
• Gear driven 1/4" hex, 17.5" long
• Includes five hex drive bits - straight slot, phillips, D-shaped pilot screw bit, 6mm hex jet bit and 1/4" hex to 1/4" drive bit
• Strongest tool of its type on the market
• Max torque is 50 inch-lb

Email Tristana@browardmotorsports.com

• Designed to simplify installation and removal of clip-type masterlinks
• One tip is shorter and notched to be placed on the pin while the other is longer to easily push the clip

Email Tristana@browardmotorsports.com

• Precision made of high grade aluminum and stainless steel
• Designed for hard to reach pilot air screws
• Gear driven 1/4" hex, 17.5" long
• Includes five hex drive bits - straight slot, phillips, D-shaped pilot screw bit, 6mm hex jet bit and 1/4" hex to 1/4" drive bit
• Strongest tool of its type on the market
• Max torque is 50 inch-lb

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

• Designed to reach hard to get 3/16 in. allen on the rocker boxes of Big Twin, Sportster & Buell motorcycles
• Features a 3/8" drive for use with torque wrench
• Vinyl cover offers comfort and minimizes chances of damage to finished surfaces

Email Tristana@browardmotorsports.com

• Economical pliers that easily does both inside and outside opening snap rings or clips
• Includes 3 extra sets of tips, 1 additional straight tip and 2 offset or angle tips

Email Tristana@browardmotorsports.com

• Made of chrome/vanadium tool steel
• Ball end allows for better access to allen head bolts (up to 25° working angel)
• Sizes include 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10mm

Email Tristana@browardmotorsports.com

• Knurled steel design for a positive grip
• Allows for easy removal and installation of standard valve cores

Email Tristana@browardmotorsports.com

• Contains longer bits for reaching into recessed cavities to adjust Keihin FCR
• Ideal for trail riders and garage mechanics alike
• Includes 6mm hex for main jets, long-reach straight slot for pilot jets & 3mm Allen for float bowl removal

Email Tristana@browardmotorsports.com

• Specially designed for Honda XR400s as a trail tool, but fits many more with 18mm plugs
• The socket is designed to fit into the spark plug cavity
• Can be used with a 3/8 ratchet, 13/16 wrench or a screwdriver through an 8.5mm hole for removal and installation
• Swivel extension can be used in either fixed or swivel configuration

Email Tristana@browardmotorsports.com

• Metric tool contains 8,10,12,14 mm bolts, phillips or slotted screws, and 5 and 6 mm hex bolts

Email Tristana@browardmotorsports.com

• T-handle socket drivers allow optional ways to use any 1/4" or 3/8" drive attachments such as sockets, hex drives, crow's foot or swivels
• Manufactured from chrome vanadium tool steel with carbon steel T-Handles
• Hard nickel - pewter finish
• Lifetime warranty

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

• Used to remove the right side-case cover
• Will fit late model Harley-Davidson motorcycles, including all 1970 and later Big Twin models and 1990 and later Sportster models
• Includes bracket, puller bolt and set screws
• Made in the USA

Email Tristana@browardmotorsports.com

• 13/16" ratchet spark plug wrench made specifically for today's water cooled 2-stroke engines with those hard to reach spark plugs
• The ratchet mechanism makes installation and removal of spark plugs very easy
• Use one side for installation and flip it over for removal
• 13/16 Extension socket allows the plug wrench to be used on newer models where the water neck prevents to use of plug wrench alone
• Kit includes wrench and socket extension

Email Tristana@browardmotorsports.com

• Set consists of the most popular sizes
• 8,10,12,14mm deep sockets

Email Tristana@browardmotorsports.com

• Will aid in the bleeding and servicing of hydraulic brakes
• Makes bleeding brakes a one man job
• The unique check valve allows fluid and air to escape while preventing air from re-entering the system

Email Tristana@browardmotorsports.com

FOR JUMBO CHAIN TOOL

• The perfect compliment to the 57-8135 Jumbo Chain Tool
• Retain that factory quad-stake look
• Safely and properly peens soft-nose-type master link pin tip

Email Tristana@browardmotorsports.com