Our Power Filter Kit feeds your SuperJet's TR-1 engine a steady diet of unrestricted air delivering improved acceleration and RPM. Replaces bulky stock air box with a high-volume stainless steel flame arrestor that attaches directly to the throttle body. Includes integrated Engine Breather/Catch Can that eliminates power-robbing crankcase vapor from your engine's air intake. This kit dramatically cleans up your engine compartment by removing the large original plastic air box and relocating electrical components onto a compact, precision-fabricated aluminum bracket. Includes detailed installation instructions.

Key Features:

• Delivers increased acceleration & power
• Oversized flame arrestor is positioned away from hood seal area for dry operation
• Includes Engine Breather/Catch Can to protect engine from potential oil hydro-lock when craft is rolled over
• Cleans up engine compartment with removal of bulky air box & relocation of electrical components
• IJSBA Race Legal
• Certified to meet U.S. Coast Guard 'SAE J1928' requirements
• Pre-filter recommended to help prevent water intrusion

NOTE: These items are designed exclusively for closed course competition ONLY.  Use on public lands and/or waterways in the state of California is illegal

Email Tristana@browardmotorsports.com

• Delivers more boost pressure & horsepower
• Increases air flow
• Improves reliability by removing OEM mesh that is prone to failure
• Billet aluminum sleeve features o-ring design for positive seal
• Includes hole saw & cutting fixture for clean installation
• Testing has determined stock ECU will compensate for increased boost by this upgrade kit

NOTE: These items are designed exclusively for closed course competition use ONLY.  Use on public lands and/or waterways in the state of California is illegal

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

All Balls made it extremely efficient when servicing or replacing the fuel pump system by creating a complete kit that is ready to install:

• Designed, built, and verified to meet or exceed OEM standards
• Our pumps draw the same current as the OEM unit, ensuring the replacement pump will not throw error codes
• Restore lost performance with this economical solution
• Includes sending unit, O-ring kit to reseal dry break connector, replacement fuel line from quick connector to the module, tank gasket, hardware (including seals) , and locking ring when applicable.
• Twin cam kits include a wiring harness to update the connector to late model version
• Limited Lifetime Warranty

Email Tristana@browardmotorsports.com

All Balls made it extremely efficient when servicing or replacing the fuel pump system by creating a complete kit that is ready to install:

• Designed, built, and verified to meet or exceed OEM standards
• Our pumps draw the same current as the OEM unit, ensuring the replacement pump will not throw error codes
• Restore lost performance with this economical solution
• Includes sending unit, O-ring kit to reseal dry break connector, replacement fuel line from quick connector to the module, tank gasket, hardware (including seals) , and locking ring when applicable.
• Twin cam kits include a wiring harness to update the connector to late model version
• Limited Lifetime Warranty

Email Tristana@browardmotorsports.com

All Balls made it extremely efficient when servicing or replacing the fuel pump system by creating a complete kit that is ready to install:

• Designed, built, and verified to meet or exceed OEM standards
• Our pumps draw the same current as the OEM unit, ensuring the replacement pump will not throw error codes
• Restore lost performance with this economical solution
• Includes sending unit, O-ring kit to reseal dry break connector, replacement fuel line from quick connector to the module, tank gasket, hardware (including seals) , and locking ring when applicable.
• Twin cam kits include a wiring harness to update the connector to late model version
• Limited Lifetime Warranty

Email Tristana@browardmotorsports.com

All Balls made it extremely efficient when servicing or replacing the fuel pump system by creating a complete kit that is ready to install:

• Designed, built, and verified to meet or exceed OEM standards
• Our pumps draw the same current as the OEM unit, ensuring the replacement pump will not throw error codes
• Restore lost performance with this economical solution
• Includes sending unit, O-ring kit to reseal dry break connector, replacement fuel line from quick connector to the module, tank gasket, hardware (including seals) , and locking ring when applicable.
• Twin cam kits include a wiring harness to update the connector to late model version
• Limited Lifetime Warranty

Email Tristana@browardmotorsports.com

All Balls made it extremely efficient when servicing or replacing the fuel pump system by creating a complete kit that is ready to install:

• Designed, built, and verified to meet or exceed OEM standards
• Our pumps draw the same current as the OEM unit, ensuring the replacement pump will not throw error codes
• Restore lost performance with this economical solution
• Includes sending unit, O-ring kit to reseal dry break connector, replacement fuel line from quick connector to the module, tank gasket, hardware (including seals) , and locking ring when applicable.
• Twin cam kits include a wiring harness to update the connector to late model version
• Limited Lifetime Warranty

Email Tristana@browardmotorsports.com

All Balls made it extremely efficient when servicing or replacing the fuel pump system by creating a complete kit that is ready to install:

• Designed, built, and verified to meet or exceed OEM standards
• Our pumps draw the same current as the OEM unit, ensuring the replacement pump will not throw error codes
• Restore lost performance with this economical solution
• Includes sending unit, O-ring kit to reseal dry break connector, replacement fuel line from quick connector to the module, tank gasket, hardware (including seals) , and locking ring when applicable.
• Twin cam kits include a wiring harness to update the connector to late model version
• Limited Lifetime Warranty

Email Tristana@browardmotorsports.com

All Balls made it extremely efficient when servicing or replacing the fuel pump system by creating a complete kit that is ready to install:

• Designed, built, and verified to meet or exceed OEM standards
• Our pumps draw the same current as the OEM unit, ensuring the replacement pump will not throw error codes
• Restore lost performance with this economical solution
• Includes sending unit, O-ring kit to reseal dry break connector, replacement fuel line from quick connector to the module, tank gasket, hardware (including seals) , and locking ring when applicable.
• Twin cam kits include a wiring harness to update the connector to late model version
• Limited Lifetime Warranty

Email Tristana@browardmotorsports.com

• Universal preformed FI line includes 2” of fuel line at 60° and 45° bends, plus additional 4” at 90° bend allows you to cut and make almost any shape
• Includes one 5/16” x 5/16” straight barb fitting Part No. 12-0087
• SAE J30 standard is safe for gasoline, diesel, and oil
• Fits most OEM 5/16” or 8 mm ID applications
• Designed to fit in your travel tool kit
• Temp range -40°C ~ 150°C
• EPA/CARB Certified
• Clamps not included

Email Tristana@browardmotorsports.com

The Fuel Line Clamp Kit is an absolute necessity for any shop, technician or DIY mechanic. Includes sets of four direct O.E.M. replacement fuel clamps, in sizes from 7 to 17mm. 

• Each clamp is an exact replica of the major OEM's fuel line clamps, and is manufactured to meet or exceed OEM performance, aesthetics, and fit
• Box labeled with part numbers for each clamp size, making 4 pack replenishment orders simple
• Kit comes with 4 (112 total clamps) of each Fuel Star fuel line OEM replica clamps
• Better option than clumsy worn gear clamps
• O.E.M. quality at a fraction of the price
• 4 pack refill kits available, sold separately

Email Tristana@browardmotorsports.com

The Fuel Line Clamp Kit is an absolute necessity for any shop, technician or DIY mechanic. Includes sets of four direct O.E.M. replacement fuel clamps, in sizes from 7 to 17mm. 

• Each clamp is an exact replica of the major OEM's fuel line clamps, and is manufactured to meet or exceed OEM performance, aesthetics, and fit
• Box labeled with part numbers for each clamp size, making 4 pack replenishment orders simple
• Kit comes with 4 (112 total clamps) of each Fuel Star fuel line OEM replica clamps
• Better option than clumsy worn gear clamps
• O.E.M. quality at a fraction of the price
• 4 pack refill kits available, sold separately

Email Tristana@browardmotorsports.com

The Fuel Line Clamp Kit is an absolute necessity for any shop, technician or DIY mechanic. Includes sets of four direct O.E.M. replacement fuel clamps, in sizes from 7 to 17mm. 

• Each clamp is an exact replica of the major OEM's fuel line clamps, and is manufactured to meet or exceed OEM performance, aesthetics, and fit
• Box labeled with part numbers for each clamp size, making 4 pack replenishment orders simple
• Kit comes with 4 (112 total clamps) of each Fuel Star fuel line OEM replica clamps
• Better option than clumsy worn gear clamps
• O.E.M. quality at a fraction of the price
• 4 pack refill kits available, sold separately

Email Tristana@browardmotorsports.com

The Fuel Line Clamp Kit is an absolute necessity for any shop, technician or DIY mechanic. Includes sets of four direct O.E.M. replacement fuel clamps, in sizes from 7 to 17mm. 

• Each clamp is an exact replica of the major OEM's fuel line clamps, and is manufactured to meet or exceed OEM performance, aesthetics, and fit
• Box labeled with part numbers for each clamp size, making 4 pack replenishment orders simple
• Kit comes with 4 (112 total clamps) of each Fuel Star fuel line OEM replica clamps
• Better option than clumsy worn gear clamps
• O.E.M. quality at a fraction of the price
• 4 pack refill kits available, sold separately

Email Tristana@browardmotorsports.com

The Fuel Line Clamp Kit is an absolute necessity for any shop, technician or DIY mechanic. Includes sets of four direct O.E.M. replacement fuel clamps, in sizes from 7 to 17mm. 

• Each clamp is an exact replica of the major OEM's fuel line clamps, and is manufactured to meet or exceed OEM performance, aesthetics, and fit
• Box labeled with part numbers for each clamp size, making 4 pack replenishment orders simple
• Kit comes with 4 (112 total clamps) of each Fuel Star fuel line OEM replica clamps
• Better option than clumsy worn gear clamps
• O.E.M. quality at a fraction of the price
• 4 pack refill kits available, sold separately

Email Tristana@browardmotorsports.com

The Fuel Line Clamp Kit is an absolute necessity for any shop, technician or DIY mechanic. Includes sets of four direct O.E.M. replacement fuel clamps, in sizes from 7 to 17mm. 

• Each clamp is an exact replica of the major OEM's fuel line clamps, and is manufactured to meet or exceed OEM performance, aesthetics, and fit
• Box labeled with part numbers for each clamp size, making 4 pack replenishment orders simple
• Kit comes with 4 (112 total clamps) of each Fuel Star fuel line OEM replica clamps
• Better option than clumsy worn gear clamps
• O.E.M. quality at a fraction of the price
• 4 pack refill kits available, sold separately

Email Tristana@browardmotorsports.com

The Fuel Line Clamp Kit is an absolute necessity for any shop, technician or DIY mechanic. Includes sets of four direct O.E.M. replacement fuel clamps, in sizes from 7 to 17mm. 

• Each clamp is an exact replica of the major OEM's fuel line clamps, and is manufactured to meet or exceed OEM performance, aesthetics, and fit
• Box labeled with part numbers for each clamp size, making 4 pack replenishment orders simple
• Kit comes with 4 (112 total clamps) of each Fuel Star fuel line OEM replica clamps
• Better option than clumsy worn gear clamps
• O.E.M. quality at a fraction of the price
• 4 pack refill kits available, sold separately

Email Tristana@browardmotorsports.com

The Fuel Line Clamp Kit is an absolute necessity for any shop, technician or DIY mechanic. Includes sets of four direct O.E.M. replacement fuel clamps, in sizes from 7 to 17mm. 

• Each clamp is an exact replica of the major OEM's fuel line clamps, and is manufactured to meet or exceed OEM performance, aesthetics, and fit
• Box labeled with part numbers for each clamp size, making 4 pack replenishment orders simple
• Kit comes with 4 (112 total clamps) of each Fuel Star fuel line OEM replica clamps
• Better option than clumsy worn gear clamps
• O.E.M. quality at a fraction of the price
• 4 pack refill kits available, sold separately

Email Tristana@browardmotorsports.com

The Fuel Line Clamp Kit is an absolute necessity for any shop, technician or DIY mechanic. Includes sets of four direct O.E.M. replacement fuel clamps, in sizes from 7 to 17mm. 

• Each clamp is an exact replica of the major OEM's fuel line clamps, and is manufactured to meet or exceed OEM performance, aesthetics, and fit
• Box labeled with part numbers for each clamp size, making 4 pack replenishment orders simple
• Kit comes with 4 (112 total clamps) of each Fuel Star fuel line OEM replica clamps
• Better option than clumsy worn gear clamps
• O.E.M. quality at a fraction of the price
• 4 pack refill kits available, sold separately

Email Tristana@browardmotorsports.com

The Fuel Line Clamp Kit is an absolute necessity for any shop, technician or DIY mechanic. Includes sets of four direct O.E.M. replacement fuel clamps, in sizes from 7 to 17mm. 

• Each clamp is an exact replica of the major OEM's fuel line clamps, and is manufactured to meet or exceed OEM performance, aesthetics, and fit
• Box labeled with part numbers for each clamp size, making 4 pack replenishment orders simple
• Kit comes with 4 (112 total clamps) of each Fuel Star fuel line OEM replica clamps
• Better option than clumsy worn gear clamps
• O.E.M. quality at a fraction of the price
• 4 pack refill kits available, sold separately

Email Tristana@browardmotorsports.com

The Fuel Line Clamp Kit is an absolute necessity for any shop, technician or DIY mechanic. Includes sets of four direct O.E.M. replacement fuel clamps, in sizes from 7 to 17mm. 

• Each clamp is an exact replica of the major OEM's fuel line clamps, and is manufactured to meet or exceed OEM performance, aesthetics, and fit
• Box labeled with part numbers for each clamp size, making 4 pack replenishment orders simple
• Kit comes with 4 (112 total clamps) of each Fuel Star fuel line OEM replica clamps
• Better option than clumsy worn gear clamps
• O.E.M. quality at a fraction of the price
• 4 pack refill kits available, sold separately

Email Tristana@browardmotorsports.com

The Fuel Line Clamp Kit is an absolute necessity for any shop, technician or DIY mechanic. Includes sets of four direct O.E.M. replacement fuel clamps, in sizes from 7 to 17mm. 

• Each clamp is an exact replica of the major OEM's fuel line clamps, and is manufactured to meet or exceed OEM performance, aesthetics, and fit
• Box labeled with part numbers for each clamp size, making 4 pack replenishment orders simple
• Kit comes with 4 (112 total clamps) of each Fuel Star fuel line OEM replica clamps
• Better option than clumsy worn gear clamps
• O.E.M. quality at a fraction of the price
• 4 pack refill kits available, sold separately

Email Tristana@browardmotorsports.com

The Fuel Line Clamp Kit is an absolute necessity for any shop, technician or DIY mechanic. Includes sets of four direct O.E.M. replacement fuel clamps, in sizes from 7 to 17mm. 

• Each clamp is an exact replica of the major OEM's fuel line clamps, and is manufactured to meet or exceed OEM performance, aesthetics, and fit
• Box labeled with part numbers for each clamp size, making 4 pack replenishment orders simple
• Kit comes with 4 (112 total clamps) of each Fuel Star fuel line OEM replica clamps
• Better option than clumsy worn gear clamps
• O.E.M. quality at a fraction of the price
• 4 pack refill kits available, sold separately

Email Tristana@browardmotorsports.com

The Fuel Line Clamp Kit is an absolute necessity for any shop, technician or DIY mechanic. Includes sets of four direct O.E.M. replacement fuel clamps, in sizes from 7 to 17mm. 

• Each clamp is an exact replica of the major OEM's fuel line clamps, and is manufactured to meet or exceed OEM performance, aesthetics, and fit
• Box labeled with part numbers for each clamp size, making 4 pack replenishment orders simple
• Kit comes with 4 (112 total clamps) of each Fuel Star fuel line OEM replica clamps
• Better option than clumsy worn gear clamps
• O.E.M. quality at a fraction of the price
• 4 pack refill kits available, sold separately

Email Tristana@browardmotorsports.com

The Fuel Line Clamp Kit is an absolute necessity for any shop, technician or DIY mechanic. Includes sets of four direct O.E.M. replacement fuel clamps, in sizes from 7 to 17mm. 

• Each clamp is an exact replica of the major OEM's fuel line clamps, and is manufactured to meet or exceed OEM performance, aesthetics, and fit
• Box labeled with part numbers for each clamp size, making 4 pack replenishment orders simple
• Kit comes with 4 (112 total clamps) of each Fuel Star fuel line OEM replica clamps
• Better option than clumsy worn gear clamps
• O.E.M. quality at a fraction of the price
• 4 pack refill kits available, sold separately

Email Tristana@browardmotorsports.com

The Fuel Line Clamp Kit is an absolute necessity for any shop, technician or DIY mechanic. Includes sets of four direct O.E.M. replacement fuel clamps, in sizes from 7 to 17mm. 

• Each clamp is an exact replica of the major OEM's fuel line clamps, and is manufactured to meet or exceed OEM performance, aesthetics, and fit
• Box labeled with part numbers for each clamp size, making 4 pack replenishment orders simple
• Kit comes with 4 (112 total clamps) of each Fuel Star fuel line OEM replica clamps
• Better option than clumsy worn gear clamps
• O.E.M. quality at a fraction of the price
• 4 pack refill kits available, sold separately

Email Tristana@browardmotorsports.com

The Fuel Line Clamp Kit is an absolute necessity for any shop, technician or DIY mechanic. Includes sets of four direct O.E.M. replacement fuel clamps, in sizes from 7 to 17mm. 

• Each clamp is an exact replica of the major OEM's fuel line clamps, and is manufactured to meet or exceed OEM performance, aesthetics, and fit
• Box labeled with part numbers for each clamp size, making 4 pack replenishment orders simple
• Kit comes with 4 (112 total clamps) of each Fuel Star fuel line OEM replica clamps
• Better option than clumsy worn gear clamps
• O.E.M. quality at a fraction of the price
• 4 pack refill kits available, sold separately

Email Tristana@browardmotorsports.com

The Fuel Line Clamp Kit is an absolute necessity for any shop, technician or DIY mechanic. Includes sets of four direct O.E.M. replacement fuel clamps, in sizes from 7 to 17mm. 

• Each clamp is an exact replica of the major OEM's fuel line clamps, and is manufactured to meet or exceed OEM performance, aesthetics, and fit
• Box labeled with part numbers for each clamp size, making 4 pack replenishment orders simple
• Kit comes with 4 (112 total clamps) of each Fuel Star fuel line OEM replica clamps
• Better option than clumsy worn gear clamps
• O.E.M. quality at a fraction of the price
• 4 pack refill kits available, sold separately

Email Tristana@browardmotorsports.com

The Fuel Line Clamp Kit is an absolute necessity for any shop, technician or DIY mechanic. Includes sets of four direct O.E.M. replacement fuel clamps, in sizes from 7 to 17mm. 

• Each clamp is an exact replica of the major OEM's fuel line clamps, and is manufactured to meet or exceed OEM performance, aesthetics, and fit
• Box labeled with part numbers for each clamp size, making 4 pack replenishment orders simple
• Kit comes with 4 (112 total clamps) of each Fuel Star fuel line OEM replica clamps
• Better option than clumsy worn gear clamps
• O.E.M. quality at a fraction of the price
• 4 pack refill kits available, sold separately

Email Tristana@browardmotorsports.com

The Fuel Line Clamp Kit is an absolute necessity for any shop, technician or DIY mechanic. Includes sets of four direct O.E.M. replacement fuel clamps, in sizes from 7 to 17mm. 

• Each clamp is an exact replica of the major OEM's fuel line clamps, and is manufactured to meet or exceed OEM performance, aesthetics, and fit
• Box labeled with part numbers for each clamp size, making 4 pack replenishment orders simple
• Kit comes with 4 (112 total clamps) of each Fuel Star fuel line OEM replica clamps
• Better option than clumsy worn gear clamps
• O.E.M. quality at a fraction of the price
• 4 pack refill kits available, sold separately

Email Tristana@browardmotorsports.com

The Fuel Line Clamp Kit is an absolute necessity for any shop, technician or DIY mechanic. Includes sets of four direct O.E.M. replacement fuel clamps, in sizes from 7 to 17mm. 

• Each clamp is an exact replica of the major OEM's fuel line clamps, and is manufactured to meet or exceed OEM performance, aesthetics, and fit
• Box labeled with part numbers for each clamp size, making 4 pack replenishment orders simple
• Kit comes with 4 (112 total clamps) of each Fuel Star fuel line OEM replica clamps
• Better option than clumsy worn gear clamps
• O.E.M. quality at a fraction of the price
• 4 pack refill kits available, sold separately

Email Tristana@browardmotorsports.com

The Fuel Line Clamp Kit is an absolute necessity for any shop, technician or DIY mechanic. Includes sets of four direct O.E.M. replacement fuel clamps, in sizes from 7 to 17mm. 

• Each clamp is an exact replica of the major OEM's fuel line clamps, and is manufactured to meet or exceed OEM performance, aesthetics, and fit
• Box labeled with part numbers for each clamp size, making 4 pack replenishment orders simple
• Kit comes with 4 (112 total clamps) of each Fuel Star fuel line OEM replica clamps
• Better option than clumsy worn gear clamps
• O.E.M. quality at a fraction of the price
• 4 pack refill kits available, sold separately

Email Tristana@browardmotorsports.com

The Fuel Line Clamp Kit is an absolute necessity for any shop, technician or DIY mechanic. Includes sets of four direct O.E.M. replacement fuel clamps, in sizes from 7 to 17mm. 

• Each clamp is an exact replica of the major OEM's fuel line clamps, and is manufactured to meet or exceed OEM performance, aesthetics, and fit
• Box labeled with part numbers for each clamp size, making 4 pack replenishment orders simple
• Kit comes with 4 (112 total clamps) of each Fuel Star fuel line OEM replica clamps
• Better option than clumsy worn gear clamps
• O.E.M. quality at a fraction of the price
• 4 pack refill kits available, sold separately

Email Tristana@browardmotorsports.com

The Fuel Line Clamp Kit is an absolute necessity for any shop, technician or DIY mechanic. Includes sets of four direct O.E.M. replacement fuel clamps, in sizes from 7 to 17mm. 

• Each clamp is an exact replica of the major OEM's fuel line clamps, and is manufactured to meet or exceed OEM performance, aesthetics, and fit
• Box labeled with part numbers for each clamp size, making 4 pack replenishment orders simple
• Kit comes with 4 (112 total clamps) of each Fuel Star fuel line OEM replica clamps
• Better option than clumsy worn gear clamps
• O.E.M. quality at a fraction of the price
• 4 pack refill kits available, sold separately

Email Tristana@browardmotorsports.com

The Fuel Line Clamp Kit is an absolute necessity for any shop, technician or DIY mechanic. Includes sets of four direct O.E.M. replacement fuel clamps, in sizes from 7 to 17mm. 

• Each clamp is an exact replica of the major OEM's fuel line clamps, and is manufactured to meet or exceed OEM performance, aesthetics, and fit
• Box labeled with part numbers for each clamp size, making 4 pack replenishment orders simple
• Kit comes with 4 (112 total clamps) of each Fuel Star fuel line OEM replica clamps
• Better option than clumsy worn gear clamps
• O.E.M. quality at a fraction of the price
• 4 pack refill kits available, sold separately

Email Tristana@browardmotorsports.com

The Fuel Line Clamp Kit is an absolute necessity for any shop, technician or DIY mechanic. Includes sets of four direct O.E.M. replacement fuel clamps, in sizes from 7 to 17mm. 

• Each clamp is an exact replica of the major OEM's fuel line clamps, and is manufactured to meet or exceed OEM performance, aesthetics, and fit
• Box labeled with part numbers for each clamp size, making 4 pack replenishment orders simple
• Kit comes with 4 (112 total clamps) of each Fuel Star fuel line OEM replica clamps
• Better option than clumsy worn gear clamps
• O.E.M. quality at a fraction of the price
• 4 pack refill kits available, sold separately

Email Tristana@browardmotorsports.com

The Fuel Line Clamp Kit is an absolute necessity for any shop, technician or DIY mechanic. Includes sets of four direct O.E.M. replacement fuel clamps, in sizes from 7 to 17mm. 

• Each clamp is an exact replica of the major OEM's fuel line clamps, and is manufactured to meet or exceed OEM performance, aesthetics, and fit
• Box labeled with part numbers for each clamp size, making 4 pack replenishment orders simple
• Kit comes with 4 (112 total clamps) of each Fuel Star fuel line OEM replica clamps
• Better option than clumsy worn gear clamps
• O.E.M. quality at a fraction of the price
• 4 pack refill kits available, sold separately

Email Tristana@browardmotorsports.com

The Fuel Line Clamp Kit is an absolute necessity for any shop, technician or DIY mechanic. Includes sets of four direct O.E.M. replacement fuel clamps, in sizes from 7 to 17mm. 

• Each clamp is an exact replica of the major OEM's fuel line clamps, and is manufactured to meet or exceed OEM performance, aesthetics, and fit
• Box labeled with part numbers for each clamp size, making 4 pack replenishment orders simple
• Kit comes with 4 (112 total clamps) of each Fuel Star fuel line OEM replica clamps
• Better option than clumsy worn gear clamps
• O.E.M. quality at a fraction of the price
• 4 pack refill kits available, sold separately

Email Tristana@browardmotorsports.com

The Fuel Line Clamp Kit is an absolute necessity for any shop, technician or DIY mechanic. Includes sets of four direct O.E.M. replacement fuel clamps, in sizes from 7 to 17mm.

Email Tristana@browardmotorsports.com

Our Sea-Doo Performance Valve Guides provide greatly improved durability for performance applications.

Email Tristana@browardmotorsports.com

Yamaha Performance Valve Guides provide greatly improved durability for performance applications. A must for racing and high performance engine operation. Sold in sets of 16.

Email Tristana@browardmotorsports.com

Sea-Doo Supercharger Shim Kit enables more accurate slip moment calibration for modified superchargers 2008 & newer. Kit includes 2 18-8 stainless steel ring shims.

Email Tristana@browardmotorsports.com

Intake Manifold Upgrade Kit enables your TR-1 naturally aspirated engine to produce more horsepower by delivering increased air flow. Precision machined billet sleeve directly replaces restrictive mesh element in OEM plastic intake manifold. Provides improved low end punch and mid-range pull. Includes detailed installation instructions. Requires RIVA Power Filter Kit to meet U.S. Coast Guard certified flame arrestor requirements.

Email Tristana@browardmotorsports.com

• Fuel filter kit for KTM, Husquvarna, GAS-GAS
• High quality replacement in tank fuel strainer and external add in fuel filter.

Email Tristana@browardmotorsports.com

Carburetor Repair Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• FCR MX style carb kits include extended fuel mixture screw
• KTM and Husqvarna Kits do not include jets or slide needle standard jetting sizes are not provided by the Factory
• NBR rubber material is used on all O-rings and rubber gaskets NBR has excellent resistance to the ethanol used in today’s fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model
• Off road use only

Email Tristana@browardmotorsports.com

Carburetor Repair Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• FCR MX style carb kits include extended fuel mixture screw
• KTM and Husqvarna Kits do not include jets or slide needle standard jetting sizes are not provided by the Factory
• NBR rubber material is used on all O-rings and rubber gaskets NBR has excellent resistance to the ethanol used in today’s fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model
• Off road use only

Email Tristana@browardmotorsports.com

Carburetor Repair Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• FCR MX style carb kits include extended fuel mixture screw
• KTM and Husqvarna Kits do not include jets or slide needle standard jetting sizes are not provided by the Factory
• NBR rubber material is used on all O-rings and rubber gaskets NBR has excellent resistance to the ethanol used in today’s fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model
• Off road use only

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.