WPS WATERCRAFT

STARTER MOTOR 1.4 BLACK TOURING M8

280-1151

$440.50

ALL BALLS starter motors are manufactured with all new components that have been fine-tuned for starting the H-D V-Twin engine
All starters are supplied with a 10/32 threaded output shaft, and a conversion bolt for the earlier 1/4-20 threaded output shafts to cover all Big Twins from 1989 thru 2005
Idler gears are manufactured from cold-heated steel
End frames are cold-chamber die cast and machined on precision fixtures
Armature hairpins are resistance-fused to the commutator
Our clutches utilize 20% oversize rollers
Hitachi Starter is 5.25" overall length.
Prestolite Starter is 6" overall length.
Limited Lifetime Warranty

* NOTE: To maintain warranty All Balls Hi-Torq starters, you must run a #4 gauge battery cable set, due to the increased performance.

Email Tristana@browardmotorsports.com

STARTER MOTOR 1.4 BLACK SOFTAIL M8

280-1150

$440.50

ALL BALLS starter motors are manufactured with all new components that have been fine-tuned for starting the H-D V-Twin engine
All starters are supplied with a 10/32 threaded output shaft, and a conversion bolt for the earlier 1/4-20 threaded output shafts to cover all Big Twins from 1989 thru 2005
Idler gears are manufactured from cold-heated steel
End frames are cold-chamber die cast and machined on precision fixtures
Armature hairpins are resistance-fused to the commutator
Our clutches utilize 20% oversize rollers
Hitachi Starter is 5.25" overall length.
Prestolite Starter is 6" overall length.
Limited Lifetime Warranty

* NOTE: To maintain warranty All Balls Hi-Torq starters, you must run a #4 gauge battery cable set, due to the increased performance.

Email Tristana@browardmotorsports.com

STARTER 14.KW CHROME `06-17 DYNA 07-17 TWIN CAM

140-10016

$598.95

ALL BALLS starter motors are manufactured with all new components that have been fine-tuned for starting the H-D V-Twin engine
All starters are supplied with a 10/32 threaded output shaft, and a conversion bolt for the earlier 1/4-20 threaded output shafts to cover all Big Twins from 1989 thru 2005
Idler gears are manufactured from cold-heated steel
End frames are cold-chamber die cast and machined on precision fixtures
Armature hairpins are resistance-fused to the commutator
Our clutches utilize 20% oversize rollers
Hitachi Starter is 5.25" overall length.
Prestolite Starter is 6" overall length.
Limited Lifetime Warranty

* NOTE: To maintain warranty All Balls Hi-Torq starters, you must run a #4 gauge battery cable set, due to the increased performance.

Email Tristana@browardmotorsports.com

STARTER 14.KW CHROME `06-17 DYNA 07-17 TWIN CAM

STARTER 1.4KW CHROME `65- EARLY 79 BIG TWIN

140-10014

$578.95

ALL BALLS starter motors are manufactured with all new components that have been fine-tuned for starting the H-D V-Twin engine
All starters are supplied with a 10/32 threaded output shaft, and a conversion bolt for the earlier 1/4-20 threaded output shafts to cover all Big Twins from 1989 thru 2005
Idler gears are manufactured from cold-heated steel
End frames are cold-chamber die cast and machined on precision fixtures
Armature hairpins are resistance-fused to the commutator
Our clutches utilize 20% oversize rollers
Hitachi Starter is 5.25" overall length.
Prestolite Starter is 6" overall length.
Limited Lifetime Warranty

* NOTE: To maintain warranty All Balls Hi-Torq starters, you must run a #4 gauge battery cable set, due to the increased performance.

Email Tristana@browardmotorsports.com

STARTER 1.4KW CHROME `65- EARLY 79 BIG TWIN

STARTER 1.4KW CHROME `89-93 BIG TWIN (EXCEPT FLH/T)

140-10001

$532.95

ALL BALLS starter motors are manufactured with all new components that have been fine-tuned for starting the H-D V-Twin engine
All starters are supplied with a 10/32 threaded output shaft, and a conversion bolt for the earlier 1/4-20 threaded output shafts to cover all Big Twins from 1989 thru 2005
Idler gears are manufactured from cold-heated steel
End frames are cold-chamber die cast and machined on precision fixtures
Armature hairpins are resistance-fused to the commutator
Our clutches utilize 20% oversize rollers
Hitachi Starter is 5.25" overall length.
Prestolite Starter is 6" overall length.
Limited Lifetime Warranty

* NOTE: To maintain warranty All Balls Hi-Torq starters, you must run a #4 gauge battery cable set, due to the increased performance.

Email Tristana@browardmotorsports.com

STARTER 1.4KW CHROME `89-93 BIG TWIN (EXCEPT FLH/T)

SPORTSTER STARTER 1.4KW BLACK

280-1009

$467.38

ALL BALLS starter motors are manufactured with all new components that have been fine-tuned for starting the H-D V-Twin engine
All starters are supplied with a 10/32 threaded output shaft, and a conversion bolt for the earlier 1/4-20 threaded output shafts to cover all Big Twins from 1989 thru 2005
Idler gears are manufactured from cold-heated steel
End frames are cold-chamber die cast and machined on precision fixtures
Armature hairpins are resistance-fused to the commutator
Our clutches utilize 20% oversize rollers
Hitachi Starter is 5.25" overall length.
Prestolite Starter is 6" overall length.
Limited Lifetime Warranty

* NOTE: To maintain warranty All Balls Hi-Torq starters, you must run a #4 gauge battery cable set, due to the increased performance.

Email Tristana@browardmotorsports.com

BIG TWIN STARTER 1.4KW BLACK PRESTOLITE

280-1007

$374.45

ALL BALLS starter motors are manufactured with all new components that have been fine-tuned for starting the H-D V-Twin engine
All starters are supplied with a 10/32 threaded output shaft, and a conversion bolt for the earlier 1/4-20 threaded output shafts to cover all Big Twins from 1989 thru 2005
Idler gears are manufactured from cold-heated steel
End frames are cold-chamber die cast and machined on precision fixtures
Armature hairpins are resistance-fused to the commutator
Our clutches utilize 20% oversize rollers
Hitachi Starter is 5.25" overall length.
Prestolite Starter is 6" overall length.
Limited Lifetime Warranty

* NOTE: To maintain warranty All Balls Hi-Torq starters, you must run a #4 gauge battery cable set, due to the increased performance.

Email Tristana@browardmotorsports.com

BIG TWIN STARTER 1.4KW BLACK HITACHI

280-1005

$374.45

ALL BALLS starter motors are manufactured with all new components that have been fine-tuned for starting the H-D V-Twin engine
All starters are supplied with a 10/32 threaded output shaft, and a conversion bolt for the earlier 1/4-20 threaded output shafts to cover all Big Twins from 1989 thru 2005
Idler gears are manufactured from cold-heated steel
End frames are cold-chamber die cast and machined on precision fixtures
Armature hairpins are resistance-fused to the commutator
Our clutches utilize 20% oversize rollers
Hitachi Starter is 5.25" overall length.
Prestolite Starter is 6" overall length.
Limited Lifetime Warranty

* NOTE: To maintain warranty All Balls Hi-Torq starters, you must run a #4 gauge battery cable set, due to the increased performance.

Email Tristana@browardmotorsports.com

BIG TWIN STARTER 1.7KW BLACK 10-32 SHAFT

280-1003

$531.30

ALL BALLS starter motors are manufactured with all new components that have been fine-tuned for starting the H-D V-Twin engine
All starters are supplied with a 10/32 threaded output shaft, and a conversion bolt for the earlier 1/4-20 threaded output shafts to cover all Big Twins from 1989 thru 2005
Idler gears are manufactured from cold-heated steel
End frames are cold-chamber die cast and machined on precision fixtures
Armature hairpins are resistance-fused to the commutator
Our clutches utilize 20% oversize rollers
Hitachi Starter is 5.25" overall length.
Prestolite Starter is 6" overall length.
Limited Lifetime Warranty

* NOTE: To maintain warranty All Balls Hi-Torq starters, you must run a #4 gauge battery cable set, due to the increased performance.

Email Tristana@browardmotorsports.com

BIG TWIN STARTER 1.7KW BLACK 10-32 SHAFT

STARTER BENDIX

26-1141

$24.28

Direct O.E.M. replacement
2 Year limited warranty against manufacturer defects
Warranty does NOT cover water ingestion from submersion of starter motor
Parts kit includes necessary components needed to rebuild the starter including brushes (does not include drive assembly)
NOTE: WPS# 26-1121 has a 9 tooth drive gear and WPS# 26-1132 has 8 tooth drive gear for Sea-Doo 800 models, verify fitment prior to ordering

Email Tristana@browardmotorsports.com

STARTER BENDIX

26-1137

$47.94

Direct O.E.M. replacement
2 Year limited warranty against manufacturer defects
Warranty does NOT cover water ingestion from submersion of starter motor
Parts kit includes necessary components needed to rebuild the starter including brushes (does not include drive assembly)
NOTE: WPS# 26-1121 has a 9 tooth drive gear and WPS# 26-1132 has 8 tooth drive gear for Sea-Doo 800 models, verify fitment prior to ordering

Email Tristana@browardmotorsports.com

STARTER BENDIX

26-1135

$69.95

Direct O.E.M. replacement
2 Year limited warranty against manufacturer defects
Warranty does NOT cover water ingestion from submersion of starter motor
Parts kit includes necessary components needed to rebuild the starter including brushes (does not include drive assembly)
NOTE: WPS# 26-1121 has a 9 tooth drive gear and WPS# 26-1132 has 8 tooth drive gear for Sea-Doo 800 models, verify fitment prior to ordering

Email Tristana@browardmotorsports.com

UNLOCK 10% OFF