Ruffian Watercraft grips are designed for optimal control in wet conditions. The grip's narrow diamonized surface pattern provides an excellent gripping system and the Lock-On design offers 100% slip-free performance. Guaranteed.

PRODUCT FEATURES:

• 130mm Length
• 7/8" (22mm) Inner Diameter
• Large Raised Pads and Deep Grooves
• Knurled Surface Pattern for Better Traction
• No Flange
• 100% Slip-Free Performance
• Includes new Snap Cap End Plugs

Fitment

• Sea-Doo

-160 Deg (ºF) thermostat a direct drop in replacement for OEM unit in Sea-Doo 4-tec models

- Lowers engine temps up to 30 degs (ºF)

- A must for any modified Sea-Doo engine that retains OEM cooling system operating under high load or in Hotter climates

Fitment

• 2005-2020 Sea-Doo
• 2005-2020 Sea-Doo 4-TEC

Take your Sea-Doo Spark to the next level with the 2° or 4° Spark Pump Wedges, engineered for riders seeking smoother handling, faster rides, and improved lift. This versatile, easy-to-install wedge enhances your ski's performance without compromising stability, making it a perfect all-around upgrade.

Why Choose the 2° Pump Wedge?

• Reduced Drag = Increased Speed: Glide through the water more efficiently and gain extra performance.
• Lift the Nose: Helps the ski stay more balanced, especially at higher speeds.
• Less Nose Pressure: Reduces darting and improves control for smoother rides.
• All-Around Improvement: Ideal for cruising, freestyle, or playful water runs.
• Super Simple Fit: Quick bolt-on installation—no complicated modifications needed.

Why Choose the 4° Pump Wedge?

• Bounce Out of the Water More: Perfect for tricks, jumps, and freestyle stunts.
• Nose Stays Down at High Speeds: Enjoy aggressive riding without losing control.
• Decreased Drag = Increased Speed: Optimized for smooth water flow and faster rides.
• Super Simple Fit: Easy to install, minimal tools required.
• Freestyle Fun Guaranteed: Make your Spark more responsive and playful in the water.

Fitment to be confirmed for IBR models.

Not happy with how your ski currently handles? Want to upgrade the look of your ski? Designed not just for cutting edge performance but killer style, the WR561-I sponsons are the perfect upgrade for your Seadoo ski!

Made for Seadoo RXTX 2018+ and RXP-X 2021+ models, these sponsons have been specifically designed to improve the handling performance of your Seadoo ski. 

Worx Racing components WR561-I Sponsons are not just replacement paddles but also include an ‘Angle Cut Adjustable Backing Rail’ which runs parallel with the bottom of the ski and is designed to reduce nose pressure at high speeds and will let the nose settle down when you're off the throttle & entering the corner.

Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions.

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Adjustable Backing Rails
• 2 x Adjustable Paddles
• All Fasteners Needed

Does not fit GTX ST3/RXT 230 Models

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Instructions

Download Instructions

Fitment

• 2018-2020 Sea-Doo
• 2018-2020 Sea-Doo RXTX, RXPX

You didn't buy a spark to turn into corners slowly, you didn't buy a spark to watch your mates have fun running rings around you. So do you really want to stick with your OEM sponsons? It's time to upgrade to Worx WR555 Sponsons!

Made for Seadoo Spark models, these sponsons have been specifically designed to improve the handling performance of your Seadoo jetski. 

With the adjustability of four positions, you can tailor the positioning to your riding style! Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions. 

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Easy mount to OEM holes
• IJSBA Legal in all classes
• Race proven performance
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Adjustable Paddles
• All Fasteners Needed

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Instructions

Fitment

• 2014-2020 Sea-Doo
• 2014-2020 Sea-Doo Spark

Bored of the way your ski currently handles? Want to corner tighter and faster? Make your jet ski feel like it's turning on rails with Worx Racing Component's WR553-I Sponsons.

Made for Seadoo 2011-2019 GTI, GTS & GTR models, these sponsons have been specifically designed to improve the handling performance of your Yamaha ski. Select from 4 different positions to tune in the lean-in-handling characteristics of your jetski!

Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions.

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Paddles
• All Fasteners Needed

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Instructions

Fitment

• 2011-2020 Sea-Doo

Suits RXPX 300 T3 Hull and RXPX 260 T3 Hull models

Mounts to original backing rail.

Designed not just for cutting edge performance but killer style! Same best selling Worx Racing paddle now with billet insert for 4 point adjustment to personalise your watercraft to your own unique riding style! 

Adjustment of height means ability to control how much roll you want your watercraft to have entering a corner to suit your riding style.

Having the paddle close to vertical allows for more paddle grip and with Height Adjustability to control initial turn in and mid corner hold to suit your riding style.

Comes with backing rails and all necessary hardware!

Instructions

Fitment

• 2012-2020 Sea-Doo
• 2012-2020 Sea-Doo RXPX

Want to revive your old ski? Looking for a way to reignite your passion for the water? Look no further than Worx WR548-I Sponsons!

Made for Seadoo  RXPX 260/300 T3 models, these sponsons have been specifically designed to improve the handling performance of your Seadoo jetski. 

Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions. 

With the adjustability of four positions, you can tailor the positioning to your riding style! WORX Racing components WR548-I Sponsons are not just replacement paddles but also include an ‘Angle Cut Adjustable Backing Rail’ which runs parallel with the bottom of the ski and is designed to reduce nose pressure at high speeds and will let the nose settle down when your off the throttle entering the corner.

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Adjustable Paddles
• All Fasteners Needed

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Instructions

Fitment

• 2012-2020 Sea-Doo
• 2012-2020 Sea-Doo RXPX

Want to fall back in love with your ski? Looking for a way to reignite your passion for the water? Look no further than Worx WR545-I Sponsons!

Made for Seadoo S3 models, these sponsons have been specifically designed to improve the handling performance of your Seadoo jetski. 

Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions. 

With the adjustability of four positions, you can tailor the positioning to your riding style! 

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Adjustable Paddles
• All Fasteners Needed

Suits S3 Hull with one piece sponsons 2009-2015.

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Instructions

Fitment

• 2009-2015 Sea-Doo

Want to revive your old ski? Looking for a way to reignite your passion for the water? Look no further than Worx WR540-I Sponsons!

Made for Seadoo RXP/RXT/GTX/GTI models, these sponsons have been specifically designed to improve the handling performance of your Seadoo jetski. 

Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions. 

With the adjustability of four positions, you can tailor the positioning to your riding style!

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Adjustable Paddles
• All Fasteners Needed

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Instructions

Download Instructions

Fitment

• 2002-2010 Sea-Doo

Want to revive your old ski? Looking for a way to reignite your passion for the water? Look no further than Worx WR506 Sponsons!

Made for Seadoo HX models, these sponsons have been specifically designed to improve the handling performance of your Seadoo jetski. 

Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions. 

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Paddles
• All Fasteners Needed

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Instructions

Fitment

• 1995-1997 Sea-Doo

Worx Racing Seadoo Sponsons are designed specifically to increase the handling performance of Seado GS, GSI, GSX LTD & GSX RFI Jetskis. Easily one of the easiest parts to upgrade on your ski. Worx recommend sponsons as one of the first upgrades to you make!

Adjustable to individual riding style and ability, these Seadoo sponsons are perfect for any Jetski enthusiast, whether you're just out on the weekend with your mates, or riding professionally. And because they're compatible with various aftermarket hulls, you can be sure they're the right call. 

Constructed from Marine Grade Aluminium, these sponsons will have you running rings around your mates!

Instructions

Fitment

• 1996-2001 Sea-Doo

Transform your Seadoo Spark in all water conditions improving drive, control and stability! A simple must have addition for anyone wanting top performance from this fun machine!

• Race proven  Seadoo Spark extended ride plate
• Added length creates extra nose pressure on launch allow pump hook up and quicker acceleration
• Increase handling characteristics throughout cornering
• Better straight line drive and added stability
• Redesigned stepped centre section for increase top speeds...
• Easy fitment using standard mounting points.
• IJSBA legal all classes....
• DOES NOT SUIT IBR MODELS

Instructions

Easily the first choice of Modification for you ST3 Sea-Doo RXTX or GTR. During testing we found much great stability and hook up in rough conditions and an increased speed gain with reduced impeller slip (cavitation). This grate improves both the ride and the feel of the craft and compliments the SeaDoo ST3 hull extremely well.

• Redesigned for maximum hook up in Rough water conditions
• Increase in acceleration and straight line stability
• Reduced cavitation on take off
• Race proven design from stock class to open
• Suits all RXTX 18+ 300Hp ST3 HULL Models and GTX LIMITED, GTX 230, GTI 170 AND GTR 230 MODELS, ALSO SUITS 2020+ RXPX Models

Instructions

Download Instructions

Fitment

• 2018-2020, 2023 Sea-Doo
• 2018-2020, 2023 Sea-Doo RXTX, RXPX

Our Worx Seadoo Spark Intake grate performs better than stock by far. Better snap off the bottom, better top speed, simply better.
Partner it up with the Spark pump plug Kit and you're really moving.

This intake grate is a must have for anyone wanting to get the very best from their Seadoo Spark. This intake grate replaces the stock plastic intake grate with more rigid Aluminium that will stand the test of time and will maximise overall handling and hook up in all water conditions.

• Increased acceleration and drive
• Reduced cavitation with increased efficiency
• Increase stability through cornering and rough water
• IJSBA legal in all classes
• Suits both 2/3 up models

Instructions

Fitment

• 2014-2020 Sea-Doo
• 2014-2020 Sea-Doo Spark

SEADOO INTAKE GRATE GTR/GTS/GTI 11+

• Redesigned for maximum hook up in Rough water conditions
• Helps eliminate loose rear end handling
• Increase in acceleration and straight line stability
• Reduced cavitation on take off
• Race proven design

Instructions

Fitment

• Sea-Doo

Easily the first choice of Modification for your T3 Sea-Doo RXPX. This intake grate is years ahead of its rivals. During testing we found a 2mph speed gain with reduced impeller slip (cavitation). This grate improves both the ride and the feel of the craft and compliments the Seadoo T3 hull extremely well.

• Redesigned for maximum hook up in Rough water conditions
• Increase in acceleration and straight line stability
• Reduced cavitation on take off
• Race proven design from stock class to open
• Used By Multiple World Champion James Bushell for his prestigious 158 performance model watercraft.
• Suits all RXPX 16+ 300Hp Models and 2012+ RXPX 260Hp Models (T3 Hull)

Instructions

Fitment

• 2012-2020 Sea-Doo
• 2012-2020 Sea-Doo RXPX

Benefits include:
- Greater control and turning capability
- Enhanced hook up
- Improved handling in choppy conditions

Instructions

Fitment

• 2008-2011 Sea-Doo

These boats hook up pretty well in the calm but really benefit from our intake grate in choppy to rough water, the Worx intake grate will not cost you any top speed in the calm but will give you heaps better hook up and drive in the rough and around the track for closed course racing. This grate has two bars running the full length of the boat that hang down and stop the back of the boat from sliding out, the centre blade of the grate does most of the work in the straights and the side wings come into play in the corners to keep the pump fully loaded and reduce cavitation.

Instructions

Fitment

• 2006-2010 Sea-Doo

The RXP is the ultimate fun machine! Supercharged, intercooler, 215 HP it is a blast to ride!
These boats hook up pretty good in the calm but really benefit from our intake grate in choppy to rough water. The Worx grate will not cost you any top speed in the calm but will give you heaps better hook up and drive in the rough and around the track for closed course racing. This grate has two bars running the full length of the boat that hang down and stop the back of the boat from sliding out, the centre blade of the grate does most of the work in the straights and the side wings come into play in the corners to keep the pump fully loaded and driving.
Pair with our WR540 Sponsons for winning results!

Instructions

Fitment

• 2004-2008 Sea-Doo

The OEM grate is fine in flat calm water conditions but is not so good in choppy or rough water, the boat cavitates and looses a lot of drive which causes a drop off in top speed of several MPH.
Performance Benefits:
- No top speed loss
- Better hook up in all water conditions
- Better cornering because the Worx grate has two rails running the full length that hang down 12mm below the pump cavity which stop the boat sliding out

Instructions

Fitment

• 2002-2007 Sea-Doo

In testing we loved the speed of the RX but discovered that they do not hook up well in anything but perfect conditions. Our Worx Intake Grate will maximise hook up and stability without causing speed loss in calm conditions. Pair with our WR519 sponsons to totally transform the handling of your boat.

Instructions

Fitment

• 2000-2004 Sea-Doo

The Worx WR212 will give you great hook up in all water conditions with no cavitation off the mark no matter how hard you accelerate, and in the rough water you will gain drive and control.

Instructions

Fitment

• 1993-2003 Sea-Doo

This grate is a must to get the best from your boat! Designed to give your pump excellent loading in all water conditions, it will not cost you speed in the calm and will make a night and day difference in choppy to rough conditions.

Instructions

Fitment

• 1991-2002 Sea-Doo

This intake grate will improve the all round handling and performance of your boat in all water conditions without costing you any top end speed. Providing the ultimate hook up and increased top end speed, our WR208 is equally at home on a family weekender as it is on a full house competition race boat.

Instructions

Fitment

• 1996-2005 Sea-Doo

This intake grate fits a number of the Seadoo models from the single rider HX as well as several of the three seater boats through to the 97 GTI.
It will improve hook up and cornering ability allowing you to ride the boat hard into tight turns and keep your pump fully loaded.

Instructions

Fitment

• 1992-1997 Sea-Doo

To suit Intake Grate WR244.

Fills the unwanted cavities in the pump shoe that cause cavitation to improve acceleration and jet unit performance.

Instructions

Fitment

• Sea-Doo
• Sea-Doo Spark

New from WORX Racing - Billet Anodised iBR/iTC Switch Panel housings to suit aftermarket handlebars when combined with our Steering System.

-Suit 2018+ RXPX 300 models with new switch panels (RH side WITHOUT cruise)

- Adjustable to suit riding hand postions for ultimate control

- OEM switch panel drops straight in (requires NO modifications)  

- For use with aftermarket handlebars combined with WORX Racing Steering System

Fitment

• 2018-2020 Sea-Doo

New from WORX Racing - Billet Anodised iBR/iTC Switch Panel housings to suit aftermarket handlebars when combined with our Steering System.

-Suit 2018+ RXTX, GTX models with new switch panels (RH side with cruise)

- Adjustable to suit riding hand postions for ultimate control

- OEM switch panel drops straight in (requires NO modifications)  

- For use with aftermarket handlebars combined with WORX Racing Steering System

Fitment

• 2018-2020 Sea-Doo

New from WORX Racing - Billet Anodised iBR/iTC Switch Panel housings to suit aftermarket handlebars when combined with our Steering System.

-Suit 2018+ RXTX, RXPX, GTX models with new switch panels (LH side)

- Adjustable to suit riding hand postions for ultimate control

- OEM switch panel drops straight in (requires NO modifications)  

- For use with aftermarket handlebars combined with WORX Racing Steering System

Fitment

• 2018-2020 Sea-Doo

Billet anodized construction

Allows fitment of 130mm ODI lock grips

Easy install

Billet endcap design to prevent grip sliding off if lock clamp fails

Included hardware

DOES NOT FIT SPARK Models or New ST3 2018 model steering

NOTE: Grips NOT Included 

Billet anodised construction

Fits 7/8 handle bars

Suits All style 4-tec DESS Posts

Fitment

• Sea-Doo

Fitment

• 1991-2011 Sea-Doo

Sea-Doo Start/ Stop switch housing

- Solid billet anodised construction

- Utilises small Sea-Doo Switch panel and late model (thick) red button

- 2 piece bar clamp style for adjustability

- Great for start/stop button on custom skis/ launch control button etc

- Can be used on either side of handle bars

Fitment

• 1989-2020 Sea-Doo

Want to upgrade your spark to better suit your riding style? The Worx Seadoo Spark Steering systems are perfect for any rider that wants to up their setup! Whether you've got a fresh new set of bars you want to put on, or you want to get the whole setup, Worx has got you covered!

• All setups retain OEM functions

• Improved ergonomics provide a more comfortable ride with less wrist strain

• Adjustable throttle/reverse housing and handlebar position

• Stems constructed from superior grade anodised billet aluminium for increased strength and durability over the failure-prone plastic OEM unit

• Allows for high quality aftermarket 7/8" (22mm) handlebar installation

Instructions

Fitment

• Sea-Doo
• Sea-Doo Spark

New from WORX Racing - Billet Anodised iBR/iTC Switch Panel housings to suit aftermarket handlebars when combined with our Steering System.

- Adjustable to suit riding hand postions for ultimate control

- OEM switch panel drops straight in (requires NO modifications)  

- Also holds Start/stop switch and button

- Will suits Sea-Doo Sparks with optional VTS fitted

- For use with aftermarket handlebars combined with WORX Racing Steering System

Fitment

• Sea-Doo

New from WORX Racing - Billet Anodised iBR/iTC Switch Panel housings to suit aftermarket handlebars when combined with our Steering System.

- Adjustable to suit riding hand postions for ultimate control

- OEM switch panel drops straight in (requires NO modifications)  

- For use with aftermarket handlebars combined with WORX Racing Steering System

Fitment

• Sea-Doo

WORX Racing  All NEW Billet Anodised iBR (reverse) Electronic actuator housing which utilises OEM electronic actuators up on the handle bars (no throttle cables required),

- Billet anodised construction

- Utilises OEM electronic actuator which drops into new housing for OEM electronic trigger feel

- Suits all Sea-Doo models with  iBR

- Clamp on Handle bar design allows for adjustability of throttle position and angle

Fitment

• 2012-2020 Sea-Doo

WORX Racing All NEW Billet Anodised Throttle Electronic actuator housing which utilises OEM electronic actuators up on the handle bars (no throttle cables required),

- Billet anodised construction

- Utilises OEM electronic actuator which drops into new housing for OEM electronic trigger feel

- Suits all Sea-Doo models with  iTC

- Clamp on Handle bar design allows for adjustability of throttle position and angle

Fitment

• 2012-2020 Sea-Doo

WORX Racing Performance Sea-Doo 300 ACE Intercooler provides huge gains over OEM Intercooler providing a cooler denser air to the engine increasing horsepower! WORX Racing Sea-Doo intercooler is a direct replacement of all Sea-Doo 300 ACE external intercoolers and is suitable for all applications from stock to open turbo watercraft. Unit comes with necessary water fittings to suit OEM cooling applications, pressure bleed on front of unit and a replaceable sacrificial anode to extend intercooler life.

Come with all brass ffitting included

Requires OEM exhaust sound suppression baffle to be removed to install. (WR04029 freeflow available)
Note: WR04060 Does not fit 2021 RXPX 300.

Fitment

• 2016-2020 Sea-Doo

WORX Racing NEW Performance Sea-Doo 4-tec Intercooler provides huge gains over OEM Intercooler providing a cooler denser air to the engine increasing horsepower! The 30% larger wider core allows for better heat transfer of compressed air from supercharger or turbo charger before entering engine. WORX Racing NEW Sea-Doo intercooler is a direct replacement of all Sea-Doo 4-tec external intercoolers and is suitable for all applications from stock to open turbo watercraft. Unit comes with necessary water fittings to suit OEM cooling applications, pressure bleed on front of unit and a replaceable sacrificial anode to extend intercooler life.

On certain older models, where the OEM pressure bleed is not present, some extra modification may be required to suit.

Fitment

• 2004-2015 Sea-Doo
• 2004-2015 Sea-Doo 4-TEC

WORX Racing Sea-Doo Performance Air filter kits allows maximum air flow to feed your high performance engine via our huge WORX Racing 4 inch marine flame arrestor, easy mount adaptor, flexible 4-inch Kanaflex hose and our tapered Supercharger mount. By removing restrictive OEM intake system and allowing filter placement in cooler areas inside the hull, this allows for lower intake temps resulting in better acceleration and an increase in top RPM’s.

• 4 inch supercharger adaptor
• Huge high flow 4-inch Flame arrestor with silicone end cap and stainless binding band idea for saltwater environment.
• CNC Billet anodised 4-inch adaptor mounts easily to hull with multiple mount points. Tapped ½ inch thread for extra fittings if required.
• Kanaflex flexible 4 inch hose with ribbed wall for strength.
• All hardware, clamps and crankcase breather filter included in kit.
• NEW Purpose Designed hull mounting bracket that fits to hull (requires drilling 2 x 6mm holes to mount bracket)
• SUITS 2018+ RXTX 300 ST3 and GTX Lim 300 ST3 Hulls ONLY

Instructions

Fitment

• 2018-2020 Sea-Doo
• 2018-2020 Sea-Doo RXTX

WORX Racing Sea-Doo Performance Air filter kits allows maximum air flow to feed your high performance engine via our huge WORX Racing 4 inch marine flame arrestor, easy mount adaptor, flexible 4-inch Kanaflex hose and our tapered Supercharger mount. By removing restrictive OEM intake system and allowing filter placement in cooler areas inside the hull, this allows for lower intake temps resulting in better acceleration and an increase in top RPM’s.

• 4 inch supercharger adaptor
• Huge high flow 4-inch Flame arrestor with silicone end cap and stainless binding band idea for saltwater environment.
• CNC Billet anodised 4-inch adaptor mounts easily to hull with multiple mount points. Tapped ½ inch thread for extra fittings if required.
• Kanaflex flexible 4 inch hose with ribbed wall for strength.
• All hardware, clamps and crankcase breather filter included in kit.
• NEW Purpose Designed hull mounting bracket that fits to hull with no drilling
• SUITS 2016-2017 RXTX 300 S3 and GTX Lim 300 S3 Hulls ONLY

Fitment

• 2016-2017 Sea-Doo
• 2016-2017 Sea-Doo RXTX

WORX Racing Sea-Doo Performance Air filter kits allows maximum air flow to feed your high performance engine via our huge WORX Racing 4 inch marine flame arrestor, easy mount adaptor, flexible 4-inch Kanaflex hose and our tapered Supercharger mount. By removing restrictive OEM intake system and allowing filter placement in cooler areas inside the hull, this allows for lower intake temps resulting in better acceleration and an increase in top RPM’s.

• 4 inch supercharger adaptor
• Huge high flow 4-inch Flame arrestor with silicone end cap and stainless binding band idea for saltwater environment.
• CNC Billet anodised 4-inch adaptor mounts easily to hull with multiple mount points. Tapped ½ inch thread for extra fittings if required.
• Kanaflex flexible 4 inch hose with ribbed wall for strength.
• All hardware, clamps and crankcase breather filter included in kit.
• NEW Purpose Designed hull mounting bracket that fits to hull with no drilling

Instructions

Fitment

• Sea-Doo
• Sea-Doo RXPX

WORX Racing Sea-Doo Performance Air filter kits allows maximum air flow to feed your high performance engine via our huge WORX Racing 4 inch marine flame arrestor, easy mount adaptor, flexible 4-inch Kanaflex hose and our tapered Supercharger mount. By removing restrictive OEM intake system and allowing filter placement in cooler areas inside the hull, this allows for lower intake temps resulting in better acceleration and an increase in top RPM’s.

• 4 inch supercharger adaptor
• Huge high flow 4-inch Flame arrestor with silicone end cap and stainless binding band idea for saltwater environment.
• CNC Billet anodised 4-inch adaptor mounts easily to hull with multiple mount points. Tapped ½ inch thread for extra fittings if required.
• Kanaflex flexible 4 inch hose with ribbed wall for strength.
• All hardware, clamps and crankcase breather filter included in kit.
• Purpose designed hull mounting bracket that fits to hull with no drilling

Fitment

• 2011-2020 Sea-Doo
• 2011-2020 Sea-Doo 4-TEC

WORX Sea-Doo Free Flow Exhaust Elbow – 2016+ Models

A favourite among Sea-Doo owners, this is one of the quickest upgrades you can make! The WORX Free Flow Exhaust Elbow replaces the restrictive OEM sound suppression baffle in 2017+ models (excluding Spark) and 2016+ 300HP skis—giving your ride a louder, deeper exhaust note in just 15 minutes.

?? Quick & easy install – 15 mins
?? Tough black-coated aluminium
?? Improves sound + allows easier intercooler access
?? Guaranteed to turn heads on the water

Fits:
• 2016+ RXP-X, RXT-X, GTX LTD 300hp models
• 2017+ Naturally Aspirated GTI, GTR, GTX, GTI 900 ACE models (excludes Spark)

Heads up! All aftermarket exhausts (yep, even ours) are significantly louder than stock. 

If you’re keen to turn heads and sound like a total weapon, this is the upgrade for you.

If your idea of fun is peace, quiet, and hearing your own thoughts... stock’s calling. Probably with a cup of chamomile.

Instructions

Download Instructions

Fitment

• 2016-2020 Sea-Doo
• 2016-2020 Sea-Doo 4-TEC

WORX Sea-Doo Free Flow Exhaust Elbow – 4-Tec Models

Upgrade your Sea-Doo’s performance and sound with the WORX Free Flow Exhaust Elbow. This direct replacement for the OEM sound suppression baffle frees up your exhaust flow, giving you improved throttle response and a noticeably sportier exhaust note.

?? Black anodised aluminium
?? Easy bolt-on install
?? Built for all Sea-Doo 4-Tec watercraft (except 300hp models)

Note:
Some early models (like the 2004 RXP) may require modification.
Not compatible with 2002–2003 GTX.
All 2017+ models require part No: WR04029 instead.
If you’re unsure, just reach out – we’re here to help.

Heads up! All aftermarket exhaust mods (yep, even ours) will make your ski significantly louder than stock. 

If you’re keen to turn heads and sound like a total weapon, this is the upgrade for you.

If your idea of fun is peace, quiet, and hearing your own thoughts... keep it stock ??

Instructions

Download Instructions

Fitment

• Sea-Doo
• Sea-Doo 4-TEC

Our new Air Filter Kit for Seadoo Spark increases throttle response and overall power by opening up and allowing more air flow over the more restrictive OEM air box.
Includes: Anodised alloy tube, high-temp silicone coupler, US Coast Guard Approved marine grade Air Filter element, stainless steel hose clamps. 
 Suits ALL Spark models.
Install requires tools, we suggest taking a look at the install instructions before purchase to ensure you have what you will need. 

Instructions

Fitment

• 2014-2020 Sea-Doo
• 2014-2020 Sea-Doo Spark

Ready to unleash that signature throaty sound????? This rear exhaust kit delivers bold performance and an aggressive tone—whether you're tearing it up on race day or chasing thrills on the weekend.

Features:

? 2.5 inch black anodised billet outlet – built tough, looks tougher

? Moulded silicone hose – eliminates resonance for that deep, clean growl

? Standard outlet block-off included – everything you need in one kit

? Deletes factory sound suppression baffles – for unrestricted flow and max attitude

? Suitable for recreational and race skis

? Fits GTR, GTI, RXPX T3 Hull, and early 4-Tec models

? Note: OPAS removal may be required prior to install

?? Does NOT fit S3 hull skis or new RXPX 300 models

This exhaust was originally designed for a 2012 RXPX. Fitment has been confirmed across many models. However, some recent models may require the alternate block-off kit (WR04013-2), which blocks the exhaust from the inside of the hull.

Disclaimer: Aftermarket exhausts (yep, including ours) are… wait for it… LOUD. If you like to make an entrance and be heard before you’re seen, you’re in the right place.

If your idea of fun is scenic detours and deep chats about fuel economy… stock’s probably more your speed ??

Instructions

Download Instructions

Stock exhaust holding you back? Rip it out and let your Spark breathe, roar, and perform the way it should with the Worx Racing Freeflow Exhaust Kit. Designed to ditch that restrictive baffle, this kit boosts throttle response, cuts back pressure, and gives you that deep, aggressive exhaust note you want.

?? NOW WITH RED INTERIOR! Tougher, stronger, and built for max durability and performance.

? More Power, Less Restriction – Better flow means snappier throttle response and reduced back pressure.
? Lightweight & Durable – Moulded silicone hose with red interior for extra strength and longevity.
? OEM Fitment, Race-Ready Sound – Uses the factory exhaust exit location for easy, clean installation.
? Easy Install – Comes with everything you need—just bolt it up and send it.
? Fits 2 & 3-Seater Sparks – Including iBR models.

Rip, roar, and ride harder. Your Spark just got a serious attitude upgrade.

Heads up! All aftermarket exhausts (yep, even ours) are significantly louder than stock. 

If you’re keen to turn heads and sound like a total weapon, this is the upgrade for you.

If your idea of fun is peace, quiet, and hearing your own thoughts... stock’s calling. Probably with a cup of chamomile.

Instructions

Download Instructions

WORX Racing NEW Sea-Doo 4-tec Intake manifold Girdle kit provides added strength to the Sea-Doo intake manifolds. The Bracket clamps around the side of the manifold easily without drilling or grinding of the stock manifold providing extra support to the join in the manifold that splits under higher boost pressures on skis with aftermarket superchargers or running higher rpm’s.

Fitment

• Sea-Doo

Want your Spark to sound as good as it rides? Ditch the restrictive stock baffle and let your engine breathe with the Worx Racing Performance Exhaust Kit. More power, better throttle response, and a deep, throaty exhaust note that turns heads. Plus, that billet anodized rear exhaust outlet gives your ski a serious performance look, because fast should look fast.

NOW WITH RED INTERIOR! Improved durability and performance, because we know you like to push limits.

? More Power, More Noise – Improved exhaust flow for better throttle response across the rev range.
? Lightweight & Durable – Moulded silicone hose with new red interior for extra strength and longevity.
? Performance Look – Billet anodized rear exhaust outlet screams race-ready.
? Easy Install – Comes with all the hardware you need, no headaches, just horsepower.
? Fits 2-Seater Sparks – (DOES NOT FIT 3-SEATER MODELS. For that, check out the WR04008).

Bolt it on. Open it up. Ride harder.

Heads up! All aftermarket exhausts (yep, even ours) are significantly louder than stock. 

If you’re keen to turn heads and sound like a total weapon, this is the upgrade for you.

If your idea of fun is peace, quiet, and hearing your own thoughts... stock’s calling. Probably with a cup of chamomile.

Instructions

Download Instructions

Fitment

• 2014-2020 Sea-Doo
• 2014-2020 Sea-Doo Spark

Whether you've just hopped on your spark for the first time or been riding it for years and want to upgrade, this is the perfect tune for you! As one of the easiest upgrades to make, the upgrade process is super straightforward! All you have to do is remove your ECU, send/drop it in to us. We'll upgrade the ECU and send it back the same or next day we receive it!

This popular tune converts both 60Hp and 90Hp Seadoo sparks up to 110Hp!

It also opens up both sport and touring mode on your spark if this isn't something already enabled. During this process, all OEM gauge functions are retained.

For optimal performance, we recommend the following RPM limit tunes for ski conversions:

• For skis upgraded from 60HP to 90HP, a 8050 RPM limit tune is recommended.
• For skis upgraded from 90HP to 110HP, a 8550 RPM limit tune is recommended.

Benefits:

• Increased RPM limit
• Remove Throttle Restrictions
• Fuel Maps Improved
• Upgraded Ignition Timings
  
• Increase to Throttle Control & Reaction

While Worx Racing Components make their best effort to ensure our tune library is up to date, unfortunately due to shifts between models, even within the same year, some skis may differ slightly. In this case Worx will get back to you in a timely manner in the event that the Reflash may take longer than expected or not be able to be completed. 

PLEASE NOTE: This is a ECU reflash service performed on your stock ECU
Once you place your order please print the below ECU form and send the completed for with your ECU. WORX aim to perform this service the same or next business day the ECU is received and will return your ECU to you via a fully trackable overnight service.   

Please Print & complete the following form. We receive multiple ECU's each day. Completing the below form ensures quick and accurate turn around of each ECU reflash order.

Download Reflash Form/Instructions

Fitment

• 2014-2020 Sea-Doo
• 2014-2020 Sea-Doo Spark

Download Reflash Form/Explanation

Fitment

• Sea-Doo

Fitment

• Sea-Doo

Want that extra level of protection? 

Worx Racing Pre-Filter wraps are designed to give you that extra peace of mind when it comes to your Air Filter. Designed to keep your Air Filter dry through extreme rides, while still ensuring maximum air flow to your ski.

Made from a durable, water repellent polyester material, these pre-filters guarantee extra life for your air filter and ski and provide a universal fit for 6" pod filters.

Comfortably fits all Worx Aftermarket Air filters excluding sparks.
For Seadoo Sparks, use WR-PF-4

Fitment

• Sea-Doo

Want that extra level of protection? 

Worx Racing Pre-Filter wraps are designed to give you that extra peace of mind when it comes to your Air Filter. Designed to keep your Air Filter dry through extreme rides, while still ensuring maximum air flow to your ski.

Perfectly fits our Seadoo Spark Air Filter Upgrade! 

Made from a durable, water repellent polyester material, these pre-filters guarantee extra life for your air filter and ski and provide a perfect fit for your Worx Seadoo Spark Air Filter!

Fitment

• Sea-Doo
• Sea-Doo Spark

Solas Sea-Doo 'SXX' Concord 14/19 Impeller

This Solas 161mm 3-blade Concord Impeller increases low-end thrust and top-end speed on Sea-Doo 325 HP models. Constructed of high strength stainless steel, Solas Impellers feature a polished hub and exclusive hub-end water seal for reduced cavitation. Impeller removal tool sold separately.

For use in craft equipped with a 161mm diameter wear ring.

Fitment

• Sea-Doo

Solas Sea-Doo Concord SX4-CD-13/16

Solas Concord Impellers increase low-end thrust and top-end speed. Constructed of high strength stainless steel, Solas Impellers feature a polished hub and exclusive hub-end water seal for reduced cavitation.

Fitment

• Sea-Doo