This Yamaha Trim extension has been specifically designed to address the trim issue faced with newer Yamaha models. This trim extension provides a quick and easy solution to the lack of trim range found with OEM parts.

Designed to increase trim range, this cost effective upgrade will bring the nose of your ski higher, reducing surface drag and providing an added increase to stop speed. Typically an increase of 1-2 MPH can be found in good riding conditions. 

Fits 2015+ Yamaha VXR, FX SVHO & 2017-2021 Yamahas

Note: Only Suits Yamaha Models WITH RiDE System

Instructions

Fitment

• Yamaha

Rear Exhaust Kit – Yamaha GP1800, FX, FZ (2008–2018) & VXR/VXS (2015+)

Take your ski to the next level with our high-performance rear exhaust kit, designed to eliminate restriction, boost power, and give your ride that aggressive, race-ready look. Featuring a massive 3-inch black billet anodised outlet, this kit gives your ski a tough note ???? and means business—on and off the water.

? Moulded black silicone hose – for a smooth, easy installation

? 3-inch billet anodised exhaust outlet – bold, blacked-out, and built to perform

? Billet anodised block-off plate – clean and durable finish

? Deletes restrictive sound suppression baffles – freeing up power and improving flow

? Silicone hose design – helps reduce drone and exhaust resonance

? Essential for high-horsepower and race applications

Full disclaimer: All aftermarket exhausts—ours included—will make your ski noticeably louder.
If you want to turn heads and sound as tough as you ride, this is the upgrade for you. If not... the stock setup might be more your style ??

Instructions

Download Instructions

Fitment

• 2015-2019 Yamaha

Unlock More Power and Sound ???? – No Cutting Required

Ditch the factory restrictions and unleash your ski’s true potential. This system removes the restrictive sound suppression baffles in your exhaust for increased performance and a more aggressive tone.

? No drilling or cutting required – uses the OEM pump tunnel outlet

? No hose modifications needed – easily return to stock if desired

? Billet anodised outlet – precision-engineered to fit directly into the OEM location

? Designed for modified machines – an essential upgrade for performance builds

? Compatible with all 2008+ Yamaha 1.8L models (Excludes EX & EXR)

Ready to ride harder, louder, and faster? This is the upgrade your ski has been waiting for.

SILICONE HOSE NOW WITH RED INTERIOR! Improved durability and performance, because we know you like to push limits.

Full disclaimer: All aftermarket exhausts—ours included—will be significantly louder.
So if you want to sound tough and be heard, this upgrade’s for you. If not… maybe stick with the stock setup and enjoy the quiet life ??

Instructions

Download Instructions

Fitment

• 2014-2020 Yamaha

Ruffian Watercraft grips are designed for optimal control in wet conditions. The grip's narrow diamonized surface pattern provides an excellent gripping system and the Lock-On design offers 100% slip-free performance. Guaranteed.

PRODUCT FEATURES:

• 130mm Length
• 7/8" (22mm) Inner Diameter
• Large Raised Pads and Deep Grooves
• Knurled Surface Pattern for Better Traction
• No Flange
• 100% Slip-Free Performance
• Includes new Snap Cap End Plugs

Fitment

• Sea-Doo

Looking for a quick and easy solution to the lack of Trim on your Yamaha Jetski? Look no further than the Yamaha Trim extension! This extension has been specifically designed to increase your trim range and bring the nose of your ski higher, resulting in reduced surface drag and an added increase to stop speed.

As a cost-effective upgrade, you can expect to see an impressive 1-2 MPH increase in good riding conditions. And the best part? It fits 2022+ Yamahas, so you can enjoy all the benefits of increased trim range without any hassle. Don't be held back by stock limitations, upgrade to the Yamaha Trim extension today!

Instructions

Fitment

• Yamaha

Want to get rid of your OEM grips and slip on some new ones? If you've got a yamaha, there's a good chance you'll need this little guys. Super easy to install, these extensions fit on the end of your OEM bars to securely lock in your grips and prevent them from sliding off if your locking clamp fails.

These bar extensions can be install in less than five minutes and their billet anodized construction and sleek minimal design ensure they'll suit any ski or aftermarket grips.

All hardware included.

Fitment

• Yamaha

• Creates even pressure in reduction nozzle too reduce pump cavitation
• Increased acceleration, drive and top speed
• Suits all ‘4 bolt’ 1.8 Yamaha pump models

Fitment

• 2014-2020 Yamaha
• 2014-2020 Yamaha SVHO

*Suits all 1.8 Naturally aspirated engines 

Allows for maximum Air Flow to your engine

* Increased acceleration and overall RPM's

* Race proven design a must for any Modified/ Race watercraft

* Engine Breather Filter also provided in kit

Instructions

Fitment

• 2008-2021, 2023-2025 Yamaha

Yamaha Dual fitting pump cooling plate kit .Billet anodised plate that fits directly onto OEM Yamaha Jet unit, allowing 2 extra water fittings to be added to your watercrafts cooling system. Also includes 2 x Billet Thru hull fitting for custom cooling kits.

• Kit Includes: 1 x Dual pump plate and 2 x ½ Inch thru hull fittings
• For Custom ‘design yourself’ Cooling kits
• A must for High horsepower applications.

Fitment

• 2008-2020 Yamaha

Solas heavy-duty, 100% stainless steel wear rings/impeller liners are the perfect replacement for your damaged original unit. Durable solid stainless steel construction resists debris damage and saltwater corrosion.

Original Yamaha wear ring is constructed of cast aluminium with a thin stainless steel liner that is pressed into place. Corrosion quickly develops between the dissimilar metals swelling the thin liner until it closes down and jams against your impeller.

Fitment

• Yamaha
• Yamaha SVHO

• Fits Yamaha SuperJet 2021+ models
• 2° pump wedge Increases Bow Lift, reduces drag for higher speed
• Improves Handling - better turning response and stability
• Ideal for all styles of riding - surf, freeride, and high-speed flatwater
• Includes stainless steel mounting bolts for easy installation
• Made from durable, marine-grade materials

Fitment

• Yamaha
• Yamaha SuperJet

Upgrade your Yamaha watercraft with the TR1 WORX Billet Ribbon Remover, precision-engineered for TR-1, Superjets and Jetblaster models. This billet aluminum upgrade replaces the restrictive OEM mesh element, improving airflow, throttle response, and overall engine performance for all riders.

Yamaha SuperJet and JetBlaster models powered by the TR-1 (1050cc) engine, from 2021 through 2026

Key Features:

• Optimized Airflow: Direct replacement for the OEM plastic intake manifold mesh for smoother, unrestricted airflow.

• Billet Aluminum Construction: Strong, durable, and built to handle high-speed racing and tough water conditions.

• Performance Boost: Noticeable gains in acceleration and top-end speed—perfect for all riders. Racers should check current rules before competition use.

• DIY Friendly: Simple, straightforward installation—no professional required.

Please Note: To run this part, you must also upgrade your air filter kit, as a flame arrestor is required on the ski. Both items are available together as a convenient package for either the Superjet or Jetblaster.  Jetblaster models will require part number WR04054 and Superjets WR04076.

Upgrade your ride with the WORX Racing Freeflow Exhaust — designed for performance, sound, and simplicity. Our exhaust features a high-quality silicone hose, making installation faster and easier than traditional setups. No drilling or additional holes are required, so you can bolt it on and enjoy instantly.

Experience increased throttle response and a deeper, more aggressive sound that enhances your ride without compromising performance. Built for riders who demand effortless installation, superior quality, and that signature WORX Racing tone.

Key Features:

• Premium silicone hose for easy fitment, engineered from high thread silcone hose to absorb drone

• No hole required — simple bolt-on installation

• Enhanced exhaust sound for a more aggressive ride

• Designed for reliability and performance

• Kit includes, silicone hose, billet outlet, gasket and all required hardware

Solas Yamaha YS-CD-14/16 Concord Impeller

Solas Concord Impellers will increase low-end thrust and top-end speed. Constructed of high strength stainless steel, Solas Impellers feature a polished hub and exclusive hub-end water seal for reduced cavitation.

For use in craft equipped with a 155mm diameter wear ring.

Fitment

• Yamaha

Fitment

• 2001 Yamaha

Fitment

• 2021, 2023-2025 Yamaha
• 2021, 2023-2025 Yamaha Superjet

Includes all bearing and plates that are not available to buy seperatly OEM

SVHO back plate allow use of SVHO wheels in SHO chargers if front housing is modified.

New thrust plate, bearing and rings to suit OEM and aftermarket shafts

Service kit for worn or failed chargers

NOTE: WORX has thoroughly tested this product in a range of worn and failed chargers. We encourage thorough inspection of failed charger housings. Damage or excessive wear to housings where shaft bearings locate are non repairable. Service Kit is designed to replace old OEM components that have excessive wear or have failed. 

Only experienced mechanics should attempt this installation.

Fitment

• Yamaha

• A must for any Modified/ High Horsepower application for maximum fuel delivery
• Increased fuel delivery for high boost/ high RPM engines
• Requires remapped ECU or Aftermarket ECU to operate
• Kit comes with all required Hardware and  adaptors (includes 4 injector kits to suit Yamaha 1.8)

Fitment

• 2008-2020 Yamaha

Fitment

• 2003-2008 Yamaha

Fitment

• 1996-2004 Yamaha

Not happy with how your ski currently handles? Want to upgrade the look of your ski? Designed not just for cutting edge performance but killer style, the WR559-I sponsons are the perfect upgrade for your Yamaha ski!

Made for Yamaha EX models, these sponsons have been specifically designed to improve the handling performance of your Yamaha jetski. 

With the adjustability of four positions, you can tailor the positioning to your riding style! Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions. 

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Enhanced control, stability and predictability, the ski stays hooked and does not throw you off
• Stops the ski from sinking in the back in tight turns like stock sponsons
• Allows for Greater corner entry speed
• Maximised top speed performance by creating less drag
• Superior straight line stability
• Easy installation to stock mounting points
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Adjustable Paddles
• All Fasteners Needed

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Instructions

Fitment

• 2017-2020 Yamaha

Fitment

• 2015-2020 Yamaha
• 2015-2020 Yamaha GP1800, VXR

Want to revive your old ski? Looking for a way to reignite your passion for the water? Look no further than Worx WR511 Sponsons!

Made for Yamaha GP760, GP800 & GP1200 models, these sponsons have been specifically designed to improve the handling performance of your Yamaha jetski. 

Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions. With the adjustability of three positions, you can tailor the positioning to your riding style!

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Adjustable Paddles
• All Fasteners Needed

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Instructions

Fitment

• 1997-2002 Yamaha

Want to revive your old ski? Looking for a way to reignite your passion for the water? Look no further than Worx WR529 Sponsons!

Made for Yamaha FX 140, FX HO models, these sponsons have been specifically designed to improve the handling performance of your Yamaha jetski. 

Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions. With the adjustability of three positions, you can tailor the positioning to your riding style!

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Paddles
• All Fasteners Needed

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Instructions

Fitment

• 2004-2020 Yamaha
• 2004-2020 Yamaha FX HO

WORX Racing Yamaha 1.8 engine cooling upgrade kit provides the much needed ‘extra cooling’ when modifying your watercraft. Our WORX Racing cooling kit allows the addition of an extra water line from the Jet unit which feeds directly into the Yamaha 1.8 engine block to significantly lower engine temperatures under load to increase engine reliability and performance.

Kit includes all necessary Fittings, hoses and clamps you need.  

1/2 hose and fittings. Suitable for Stock and mild applications (eg Filter, reflash etc)

A must for skis with re-programmed ECU and higher RPM limit

PLEASE SELECT YEAR MODEL OF SKI IN DROP DOWN MENU

Instructions

Fitment

• 2008-2017 Yamaha

Our WORX Racing Yamaha 1.8 Air filter kit allows maximum air flow to your engine via a Huge 4-inch flame arrestor. Our tapered smooth bore moulded silicone hose fits directly onto your Yamaha OEM supercharger front housing for easy installation and our Billet anodised 4 inch air filter bracket is easily secured to the hull in a dry but accessible location.

• Allows maximum Air flow to your engine removing restrictive OEM paper filter
• Huge 4-inch Flame arrestor with silicone end cap and stainless binding band idea for saltwater environment J 1928 Approved USCG
• Billet anodised 4-inch adaptor mounts easily to hull
• Silicone moulded hose the tapers down to suit the supercharger with smooth internal bore to eliminate any intake turbulence
• Increased acceleration and overall RPM’s
• Works great combined with (WR04001) Ribbon Removal for maximium air flow into your engine
• Race proven design a must for and Modified/ Race watercraft
• Engine Breather filter also provided in kit

Instructions

Fitment

• 2008-2020 Yamaha

Billet Hi flow replacement for restrictive OEM plastic pump strainer.

Larger openings for increased water flow into engine for lower engine temps.

One fitting.

Fits all 2020+ SVHO

Fitment

• 2018-2020 Yamaha
• 2018-2020 Yamaha SVHO

Billet Hi flow replacement for restrictive OEM plastic pump strainer.

Larger openings for increased water flow into engine for lower engine temps.

Fits all 2018+ SVHO

Fitment

• 2018-2020 Yamaha
• 2018-2020 Yamaha SVHO

Billet Hi flow replacement for restrictive OEM plastic pump strainer.
One Fitting for Cooling Line. 

Larger openings for increased water flow into engine for lower engine temps.

Fits all 2014-2019 SVHO

Fitment

• 2018-2020 Yamaha
• 2018-2020 Yamaha SVHO

Billet Hi flow replacement for restrictive OEM plastic pump strainer.

Larger openings for increased water flow into engine for lower engine temps.

Fits all 2014-19 SVHO

Fitment

• 2018-2020 Yamaha
• 2018-2020 Yamaha SVHO

 Suits all 1.8 Yamaha Supercharged models excluding 18 models with plastic manifold. (Ribbon delete does not suit plastic manifold models)

Air Filter Kit: Our WORX Racing Yamaha 1.8 Air filter kit allows maximum air flow to your engine via a Huge 4-inch flame arrestor. Our tapered smooth bore moulded silicone hose fits directly onto your Yamaha OEM supercharger front housing for easy installation and our Billet anodised 4 inch air filter bracket is easy secured to the hull in a dry but accessible location.

• Allows maximum Air flow to your engine removing restrictive OEM paper filter
• Huge 4-inch Flame arrestor with silicone end cap and stainless binding band idea for saltwater environment J 1928 Approved USCG
• Billet anodised 4-inch adaptor mounts easily to hull
• Silicone moulded hose the tapers down to suit the supercharger with smooth internal bore to eliminate any intake turbulence
• Increased acceleration and overall RPM’s
• Works great combined with (WR04001) Ribbon Removal for maximum air flow into your engine
• Race proven design a must for and Modified/ Race watercraft
• Engine Breather filter also provided in kit

Ribbon: Replaces the restrictive mesh element in the intake manifold.
It increases air flow to the engine, maximising horsepower.
Constructed from billet for extra durability and strength
Tapered design to allow more air flow

PLEASE NOTICE, THIS ITEM DOES NOT SUIT 18+ PLASTIC INTAKE MANIFOLD SKIS

Blow off Valve: Our cost effective design BOV will greatly improve supercharger clutch life in your Yamaha 1.8 engine. Kit includes a High Strength silicone hose that incorporates a Billet lightweight “Blow off Valve’, necessary vacuum lines and fittings for install.
Easy install to OEM location
Lightweight billet construction less load on hose to reduce fatigue and tearing
Easy to dissemble for cleaning and maintenance

Instructions

Instructions

Fitment

• 2008-2020 Yamaha

This complete kit includes (10) Washers, (10) Studs and (10) Nuts. Constructed from premium 8740 alloy our Stud Kit will provide more accurate and consistent torque loading

A must have for any engine re-build or performance modifications!

Kit includes 10 x stud/nut/washer. Picture for illustration purpose only

Fitment

• 2004-2020 Yamaha
• 2004-2020 Yamaha SVHO, SHO

This complete kit includes (10) Washers, (10) Studs and (10) Nuts. Constructed from premium 8740 alloy our Stud Kit will provide more accurate and consistent torque loading.

A must have for any engine re-build or performance modifications!

Kit includes 10 x stud/nut/washer. Picture for illustration purpose only

Fitment

• 2008-2020 Yamaha
• 2008-2020 Yamaha SVHO, SHO

Bored of the way your ski currently handles? Want to corner tighter and faster? Make your jet ski feel like it's turning on rails with Worx Racing Component's WR563-I Sponsons.

Made for Yamaha 2019+ FX, 2017+ GP1800, & 2011 VXR/VXS models, these sponsons have been specifically designed to improve the handling performance of your Yamaha ski. Featuring our greatest adjustability innovation yet with 8 possible settings; you're able to tailor your watercraft's handling to your individual riding style! 

Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions.

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Paddles
• 2 x Spacers
• All Fasteners Needed

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Instructions

Download Instructions

Fitment

• Yamaha
• Yamaha GP1800, VXR, VXS

Not happy with how your ski currently handles? Want to upgrade the look of your ski? Designed not just for cutting edge performance but killer style, the WR556-I sponsons are the perfect upgrade for your Yamaha ski!

Made for Yamaha 12-18 FX and 14-16 FZ models, these sponsons have been specifically designed to improve the handling performance of your Yamaha jetski. 

With the adjustability of four positions, you can tailor the positioning to your riding style! Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions. 

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Enhanced control, stability and predictability, the ski stays hooked and does not throw you off
• Stops the ski from sinking in the back in tight turns like stock sponsons
• Allows for Greater corner entry speed
• Maximised top speed performance by creating less drag
• Superior straight line stability
• Easy installation to stock mounting points
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Adjustable Paddles
• All Fasteners Needed

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Instructions

Fitment

• 2012-2020 Yamaha

Not happy with how your ski currently handles? Want to upgrade the look of your ski? Designed not just for cutting edge performance but killer style, the WR554-I sponsons are the perfect upgrade for your Yamaha ski!

Made for Yamaha 08-11 FX and 09-13 FZ models, these sponsons have been specifically designed to improve the handling performance of your Yamaha jetski. 

With the adjustability of four positions, you can tailor the positioning to your riding style! Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions. 

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Enhanced control, stability and predictability, the ski stays hooked and does not throw you off
• Stops the ski from sinking in the back in tight turns like stock sponsons
• Allows for Greater corner entry speed
• Maximised top speed performance by creating less drag
• Superior straight line stability
• Easy installation to stock mounting points
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Adjustable Paddles
• All Fasteners Needed

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Instructions

Fitment

• 2008-2011 Yamaha

Not happy with how your ski currently handles? Want to upgrade the look of your ski? Designed not just for cutting edge performance but killer style, the WR552-I sponsons are the perfect upgrade for your Yamaha ski!

Made for Yamaha 2017 + GP1800 & 2011+ VXR/VXS models, these sponsons have been specifically designed to improve the handling performance of your Yamaha jetski. 

With the adjustability of four positions, you can tailor the positioning to your riding style! Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions. 

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Adjustable Paddles
• All Fasteners Needed

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Instructions

Fitment

• 2011-2020 Yamaha
• 2011-2020 Yamaha GP1800, VXR, VXS

- Constructed from Marine Grade Aluminium

- Suitable for ALL styles of riding !

Instructions

Fitment

• Yamaha

Worx Racing WR544 Yamaha Superjet Sponsons are designed specifically to increase the handling performance of Yamaha Superjet Jetski's. Easily one of the easiest parts to upgrade on your ski. Worx recommend sponsons as one of the first upgrades to your ski. 

Adjustable to individual riding style and ability, these Superjet sponsons are perfect for any Jetski enthusiast, whether you're just out on the weekend with your mates, or riding professionally. And because they're compatible with various aftermarket hulls, you can be sure they're the right call. 

Constructed from Marine Grade Aluminium, this sponson set will have you running rings around your mates!

Instructions

Fitment

• 1990-2020, 2023-2025 Yamaha
• 1990-2020, 2023-2025 Yamaha Superjet

Not happy with how your ski currently handles? Want to upgrade the look of your ski? Designed not just for cutting edge performance but killer style, the WR507 sponsons are the perfect upgrade for your Yamaha ski!

Made for Yamaha Waive Raider models, these sponsons have been specifically designed to improve the handling performance of your Yamaha jetski. 

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Adjustable Paddles
• All Fasteners Needed

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Instructions

Fitment

• Yamaha

Benefits include:

- Proudly designed in conjunction with Ross Champion

- Suitable for Freeride and Freestyle riding

- D-cut design to allow the wave rider and freestyler to break the rear end loose with ease for tail whips and aerial moves

Please note we do NOT recommended this plate for racing or high speed applications where top speed stability is needed. This plate will NOT fit the 1993-2007 Super Jet—for this model WORX offers the WR315.

Instructions

Fitment

• 2008-2020 Yamaha
• 2008-2020 Yamaha Superjet

Struggling to keep your Superjet under control? Yeah, we’ve seen it, bouncing around like a dolphin with too much caffeine.

That’s why we made the WR312 Ride Plate. Designed for superior grip, stability, and speed, this plate gives you the confidence to throw down tricks, carve tighter turns, and keep your ski planted instead of skipping across the water like a stone.

PLUS It now comes in black. 

? Precision Fit for 2008-2020 Superjet – Tailored design for seamless installation and optimal performance.
? Enhanced Drive & Control – Improved water flow and grip keep your ski planted through every turn.
? Greater Stability – Reduces hull movement for a smoother, more predictable ride.
? Durable Black Powder-Coated Finish – Upgraded for superior corrosion resistance, durability, and a sleek, race-ready look.

Instructions

Download Instructions

Fitment

• Yamaha
• Yamaha Superjet

- Reduced length allows more control over ski in freestyle maneuvers while helping to keep hooked up during turns where the ski is leaned way over

- Designed by Freestylers for Freestyle

- Widely regarded as the best freestyle plate available for the Superjet

- “D” cut-out with the to keep the boat more stable in those difficult freestyle tricks

- Softer lines to help it slide out when you need it to

- Preferred choice for lighter stand-up riders and racers that find the longer plate difficult to ride in tighter rough race situations

Instructions

Fitment

• Yamaha
• Yamaha Superjet

- Designed for 1991-07 Superjet

- "D" cut-out design allowing you to push the boat hard into turns and provides greater stability and less tendance to slide out

- Extra length to hold the boat flatter

- Bevelled leading edge on the “D” cut-out that picks up water when the bow of the boat starts to lift under hard acceleration or in rough water, this helps to hold the boat flatter and give you a lot better drive and control  

- Hard chine lines on the edges of the plate that make it easier to carve those really tight turns with complete control

Instructions

Fitment

• Yamaha
• Yamaha Superjet

Longer than the stock unit, with sharper edges this ride plate will get you on the plane quicker and let you turn harder without letting go. Great in rough water and in the surf.

Instructions

Fitment

• Yamaha

The Yamaha GP1800 SVHO, 2015+ VXR is the ultimate fun machine and it is with great excitement Worx Racing Components bring to you their WR246 Intake Grate designed specifically for this new model. This intake grate is a must have for both recreational riders and racers wanting to get the very best from their new GP1800 or VXR.

Designed for the ultimate hook-up and handling, this intake grate combats cavitation in choppy to rough water conditions, maximises acceleration and even adds top end speed. Stability and cornering ability are also improved, this is a huge benefit when towing water skiers or other water toys. In testing, Worx owner Gary Watson discovered that this grate paired with Worx sponsons (WR552-I) completely transformed the all round handling of this boat.

Worx Racing Components are proudly Australian made.

Instructions

Fitment

• Yamaha
• Yamaha GP1800, VXR

The Yamaha FZR/FZS SVHO is the ultimate fun machine and it is with great excitement Worx Racing Components bring to you their WR245 Intake Grate designed specifically for this new model. This intake grate is a must have for both recreational riders and racers wanting to get the very best from their new FZR or FZS.

Designed for the ultimate hook-up and handling, this intake grate combats cavitation in choppy to rough water conditions, maximises acceleration and even adds top end speed. Stability and cornering ability are also improved, this is a huge benefit when towing water skiers or other water toys. In testing, Worx owner Gary Watson discovered that this grate paired with Worx sponsons (WR556-I) completely transformed the all round handling of this boat.

To maximise the performance gains achieved with this intake grate, Worx also have a polyurethane pump plug kit available (WR0706) to fill the voids in the intake grate that bleed air into the pump causing cavitation. Worx Racing Components are proudly Australian made

Instructions

Fitment

• 2014-2016 Yamaha
• 2014-2016 Yamaha FZR, FZS

Suits Yamaha VXR/VXS models from 2011- 2014

Product Benefits include:

* Significantly reduced cavitation

* Increased acceleration

* Increased top end speed

We have also developed a pump seal kit to compliment this grate. Location specific, these polyurethane inserts fill the voids in the OEM pump inlet shoe that bleed air into the pump causing cavitation

Fitment

• Yamaha
• Yamaha VXR, VXS

Benefits include:
- Reduced Cavitation
- Enhanced Hook Up
- Superior Handling

Instructions

Fitment

• Yamaha

Specifically designed for the 2012 Yamaha FX SHO hull.

Benefits include:

- Closed Course and Offshore Race tested and proven Used by Chris MacClugage in 2016 P1 Aqua X skis built by the factory Yamaha Deans team!!!

- Superior hook up

- Better bow lift for top speed 

- Smoother turning

- Utilize WORX Pump Plug kit WR0703

Instructions

Fitment

• 2012-2020 Yamaha
• 2012-2020 Yamaha FX HO, FX SHO, FX SVHO

Take Control of the Water

Upgrade your ride with precision handling and unbeatable performance. This intake grate delivers serious gains where it counts:

? Sharper turning and tighter control – dominate every corner with greater stability

? Maximum hook-up – keep your ski glued to the water, even under throttle

? Confidence in the chop – improved handling in rough water conditions

? Faster take-off – boost acceleration and reduce cavitation

? Plug-and-play ready – fully compatible with the WR0701 Pump Plug Kit

Fits: 2009, 2010, 2011, 2012, 2013 Yamaha FZR / FZS models

A must-have for riders chasing next-level performance.

Instructions

Download Instructions

Fitment

• 2009-2013 Yamaha
• 2009-2013 Yamaha FZR, FZS

Benefits include:

- Greater control and turning capability

- Enhanced hook up

- Improved handling in choppy conditions

Instructions

Fitment

• 2008-2016 Yamaha
• 2008-2016 Yamaha FX SHO

- Specifically designed of the 2008+ Superjet Hull
- Deeper scoop for improved hook up and turning
- Great in rough water and for surf riding
- Wide and deep pick up area which not only loads the pump but allows you to ride hard up to a turn buoy and then when you come off the throttle the grate acts like a brake to slow you into the turn

For a less aggressive alternative try our WR205. Fits all year model Superjets.

Instructions

Fitment

• Yamaha
• Yamaha Superjet

The Worx WR224 Intake Grate fixes the cavitation by loading the pump more efficiently giving even better hook up and drive and will not cost you top speed in flat calm conditions.
The grate has two bars at the front and a single bar at the rear supporting a foil that picks up water in even the roughest conditions to fully load the pump for better drive and handling.

Instructions

Fitment

• 2004-2020 Yamaha
• 2004-2020 Yamaha FX HO

Not having a WORX intake grate on a Yamaha GP, is like having a high performance sportscar on a wet road with bald tyres, it is just not possible to get the best from these boats.
Performance benefits of our WR218 include:
- Better hook up in all conditions
- No top speed loss
- Better pump loading in rough water
- Holds the boat on the water better giving better control
- Better cornering because the Worx grate has two rails running the full length that hang down 12mm below the pump cavity which stops the ski sliding out

 Fits GP800R, GP1200R, GP1300R

Instructions

Fitment

• 2000-2008 Yamaha