Description 

Designed for full adjustability with the ideal position being dependent on the rider weight, riding style and the type of riding they are doing:
- For maximum top speed in calm water position your blades in the fully forward position
- For maximum handling and hook up the fully back position is best

Description 

Designed not just for cutting edge performance but killer style! Same best selling Worx Racing paddle now with billet insert for 4 point adjustment to personalize your watercraft to your own unique riding style! 

FOR 17+ GP1800 / 11+ VXR,VXS

Includes backing rails and all necessary hardware.

Product benefits include:

- Greater stability

- Improved cornering

- Superior handling

Worx's brand new Seadoo Trim Tabs, are a huge improvement on stock. With an improved angle, these tabs promote the front of the ski to lift up, resulting in increased performance. Compared to the plastic OEM tabs, these machined aluminium tabs hold a straight edge for consistent performance, where the stock ones have a tendency to come bowed or bow over time.  The anodised surface means these have a long life even in salt water condition. 

• Improves performance and nose lift
• Durable Billet Construction
• 1 Hour Installation

Designed not just for cutting edge performance but killer style! Same best selling Worx Racing paddle now with billet insert for 4 point adjustment to personalize your watercraft to your own unique riding style! 

Specifically designed for the unique handling characteristics of the 2019 Yamaha FX 

Product benefits include:

- Enhanced control, stability, and predictability, the ski stays hooked and does not      throw you off
- Stops the ski from sinking in the back in tight turns like stock sponsons
- Allows for Greater corner entry speed
- Maximized top speed performance by creating less drag
- Superior straight line stability
- Easy installation to stock mounting points

IJSBA legal for all classes

Includes backing rails and all necessary hardware.

Description 

Designed not just for cutting edge performance but killer style! Same best selling Worx Racing paddle now with billet insert for 4 point adjustment to personalize your watercraft to your own unique riding style! 

WORX Racing components WR561-I Sponsons are not just replacement paddles but also include an ‘Angle Cut Adjustable Backing Rail’ which runs parallel with the bottom of the ski and is designed to reduce nose pressure at high speeds and will let the nose settle down when you are off the throttle entering the corner.

Adjustment of height means the ability to control how much roll you want your watercraft to have to enter a corner to suit your riding style.

Having the paddle close to vertical allows for more paddle grip and with Height Adjustability to control initial turn in and mid corner hold.

Does not fit GTX ST3 or RTX 230 MODELS WR562-I for GTX and 230 Models

Designed not just for cutting edge performance but killer style! Same best selling Worx Racing paddle now with billet insert for 4 point adjustment to personalise your watercraft to your own unique riding style! 

WORX Racing components WR548-I Sponsons are not just replacement paddles but also include an ‘Angle Cut Adjustable Backing Rail’ which runs parallel with the bottom of the ski and is designed to reduce nose pressure at high speeds and will let the nose settle down when your off the throttle entering the corner.

Adjustment of height means ability to control how much roll you want your watercraft to have entering a corner to suit your riding style.

Having the paddle close to vertical allows for more paddle grip and with Height Adjustability to control initial turn in and mid corner hold.

Comes with backing rails and all necessary hardware!

DOES NOT SUIT RXTX ST3 MODELS ONLY GTX 230 and RXT 230

Instructions

Designed not just for cutting edge performance but killer style! Same best selling Worx Racing paddle now with billet insert for 4 point adjustment to personalize your watercraft to your own unique riding style! 

Specifically designed for the unique handling characteristics of the Yamaha FX and FZ hulls.

Includes backing rails and all necessary hardware.

Product benefits include:

- Enhanced control, stability, and predictability, the ski stays hooked and does not throw you off
- Stops the ski from sinking in the back in tight turns like stock sponsons
- Allows for Greater corner entry speed
- Maximized top speed performance by creating less drag
- Superior straight line stability
- Easy installation to stock mounting points

IJSBA legal for all classes

Description 

WR06014-ET

NEW REVISED DESIGN!

- Includes WORX All NEW Billet anodized Electronic throttle lever housing which utilizes OEM electronic throttle actuator up on the handlebars (no throttle cable required), Start/Stop switch holder, Steering Column and necessary hardware.
- Retains all OEM functions.
- Improved ergonomics give you a more comfortable ride with less strain on your wrists with throttle housing angle and position adjustable on the handlebars.
- Constructed from bulletproof Anodised Billet Aluminium for greater strength and durability over the OEM plastic unit which is prone to failure in high-stress environments (racing/ocean riding).
- Allows you to use higher quality aftermarket 7/8" diameter handlebars to a bend that suits your riding style.

Description 

WR06014-ET-KIT

- Kit includes Steering stem, All controls, Bars and Grips (everything pictured)

NEW REVISED DESIGN!

- Includes WORX All NEW Billet anodized Electronic throttle lever housing which utilizes OEM electronic throttle actuator up on the handlebars (no throttle cable required), Start/Stop switch holder, Steering Column and necessary hardware, Handlebars and Grips. Everything included converting your steering.
- Retains all OEM functions.
- Improved ergonomics give you a more comfortable ride with less strain on your wrists with throttle housing angle and position adjustable on the handlebars.
- Constructed from bulletproof Anodised Billet Aluminium for greater strength and durability over the OEM plastic unit which is prone to failure in high-stress environments (racing/ocean riding).
- Comes with Pro Taper Rapter bars and ODI grips for best riding position and ultimate grip

Description 

WR06014-iBR-KIT

NEW REVISED DESIGN!

- Kit includes Steering stem, All controls, Bars and Grips (everything pictured)

Includes WORX All NEW Billet anodized Electronic throttle lever and brake lever housing which utilizes OEM electronic throttle actuator up on the handlebars (no throttle cable required), Start/Stop switch holder, Steering Column and necessary hardware, Handlebars and Grips. Everything included converting your steering.
- Retains all OEM functions.
- Improved ergonomics give you a more comfortable ride with less strain on your wrists with throttle housing angle and position adjustable on the handlebars.
- Constructed from bulletproof Anodised Billet Aluminium for greater strength and durability over the OEM plastic unit which is prone to failure in high-stress environments (racing/ocean riding).
- Comes with Pro Taper Rapter bars and ODI grips for best riding position and ultimate grip

Performance Benefits:

• Better handling when cornering, smoother more controlled turning
• Our sponsons let the boat ride higher in the bow which gives several advantages
• Dryer ride in all conditions
• Higher top speed because the boat rides higher in the water, around 1 1/2 - 2 MPH speed gain
• Adjustability to suit your riding style - down position (top hole) for recreational riding and racing and up position (bottom hole) for enduro rides or races, this position will give you more speed but less aggressive cornering

Description 

This WR 310 is a totally new design for the SXR developed for WORX back in 2004 by team rider Jordan Fielder and his US tuner Ronnie Saner. This ride plate was used by Jordan to take out number 1 in Pro Mod class at World Finals that year.

Description 

Deeply scooped grate for better hook up. Perfectly matched to enable easy installation.
The Worx Intake Grate is a must for anyone wanting to get the best from their new SX-R. In testing, we discovered that with the OEM grate, the boat lost hook up in anything but flat calm water. Many State and World titles have been won by riders using this intake grate.
The WR222 gives the boat the pump loading it needs by holding the boat on the water and keeping the pump driving in even the roughest water and in the surf. The two bars running the full length of the boat hang down the full legal IJSBA limit of 12mm (1/2") stopping the back from sliding out, the center blade of the grate does most of the work in the straights and the side wings come into play in the corners to keep the pump fully loaded and driving.

Description 

Designed not just for cutting edge performance but killer style! Best selling Worx Racing paddle now with billet insert for 4 point adjustment to personalize your watercraft to your own unique riding style! 

Includes backing rails and all necessary hardware.

Product benefits include:

Greater cornering ability and more straight line stability
Adjustable fin and backing rail to suit riding style
Easy mount to OEM holes
IJSBA Legal in all classes
Race proven performance

Want to corner tighter and faster? Make your jet ski feel like it's turning on rails with Worx Racing Component's WR564-I Sponsons.

Made for Seadoo 2020 GTI, GTS & GTR models, these sponsons have been specifically designed to improve the handling performance of your Seadoo ski. Initial testing found the GTR and GTIs unreliable in straight line handling and had a tendency to chine walk. The new sponsons directly combat that and reduce the need for constant steering adjustments when travelling in a straight line.

With included spacers and 4 position adjustable paddles, and optional spacers, you're able to select from 8 different positions to tune in the lean-in-handling characteristics of your jetski, making your ski's handling more or less aggressive!

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Adjustable Paddles
• 2 x Spacers
• All Fasteners Needed

Not happy with how your ski currently handles? Want to upgrade the look of your ski? Designed not just for cutting edge performance but killer style, the WR556-I sponsons are the perfect upgrade for your Yamaha ski!

Made for Yamaha 12-23 FX and 14-16 FZ models, these sponsons have been specifically designed to improve the handling performance of your Yamaha jetski. 

With the adjustability of four positions, you can tailor the positioning to your riding style! Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions. 

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Enhanced control, stability and predictability, the ski stays hooked and does not throw you off
• Stops the ski from sinking in the back in tight turns like stock sponsons
• Allows for Greater corner entry speed
• Maximized top speed performance by creating less drag
• Superior straight line stability
• Easy installation to stock mounting points
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Adjustable Paddles
• All Fasteners Needed