These boats hook up pretty well in the calm but really benefit from our intake grate in choppy to rough water, the Worx intake grate will not cost you any top speed in the calm but will give you heaps better hook up and drive in the rough and around the track for closed course racing. This grate has two bars running the full length of the boat that hang down and stop the back of the boat from sliding out, the centre blade of the grate does most of the work in the straights and the side wings come into play in the corners to keep the pump fully loaded and reduce cavitation.

Instructions

Fitment

• 2006-2010 Sea-Doo

Get the party started with our Upgrade Kits! Whether you're looking to just kick off your modifications or you're looking to get your ski races ready, these upgrade kits are the perfect package.

The combination of parts in each of these kits are perfectly designed to pair well and draw the maximum amount of performance out of your ski whilst still maintaining ski life. Each upgrade level is relatively easy to install for any mechanically minded individual!

Model Fitment

2010-2015 Seadoo RXTX 260

Parts Included 

Bored of the way your ski currently handles? Want to corner tighter and faster? Make your jet ski feel like it's turning on rails with Worx Racing Component's WR553-I Sponsons.

Made for Seadoo 2011-2019 GTI, GTS & GTR models, these sponsons have been specifically designed to improve the handling performance of your Yamaha ski. Select from 4 different positions to tune in the lean-in-handling characteristics of your jetski!

Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions.

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Paddles
• All Fasteners Needed

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Instructions

Fitment

• 2011-2020 Sea-Doo

SEADOO INTAKE GRATE GTR/GTS/GTI 11+

• Redesigned for maximum hook up in Rough water conditions
• Helps eliminate loose rear end handling
• Increase in acceleration and straight line stability
• Reduced cavitation on take off
• Race proven design

Instructions

Fitment

• Sea-Doo

Want to upgrade your spark to better suit your riding style? The Worx Seadoo Spark Steering systems are perfect for any rider that wants to up their setup! Whether you've got a fresh new set of bars you want to put on, or you want to get the whole setup, Worx has got you covered!

• All setups retain OEM functions

• Improved ergonomics provide a more comfortable ride with less wrist strain

• Adjustable throttle/reverse housing and handlebar position

• Stems constructed from superior grade anodised billet aluminium for increased strength and durability over the failure-prone plastic OEM unit

• Allows for high quality aftermarket 7/8" (22mm) handlebar installation

Instructions

Fitment

• 2012-2017 Sea-Doo
• 2012-2017 Sea-Doo RXPX

Get the party started with our Upgrade Kits! Whether you're looking to just kick off your modifications or you're looking to get your ski races ready, these upgrade kits are the perfect package.

The combination of parts in each of these kits are perfectly designed to pair well and draw the maximum amount of performance out of your ski whilst still maintaining ski life. Each upgrade level is relatively easy to install for any mechanically minded individual!

Model Fitment

2012-2015 Seadoo RXPX 260

Parts Included 

Get the party started with our Upgrade Kits! Whether you're looking to just kick off your modifications or you're looking to get your ski races ready, these upgrade kits are the perfect package.

The combination of parts in each of these kits are perfectly designed to pair well and draw the maximum amount of performance out of your ski whilst still maintaining ski life. Each upgrade level is relatively easy to install for any mechanically minded individual!

Model Fitment

2012-2016 Seadoo GTR 215

Parts Included

Transform your Seadoo Spark in all water conditions improving drive, control and stability! A simple must have addition for anyone wanting top performance from this fun machine!

• Race proven  Seadoo Spark extended ride plate
• Added length creates extra nose pressure on launch allow pump hook up and quicker acceleration
• Increase handling characteristics throughout cornering
• Better straight line drive and added stability
• Redesigned stepped centre section for increase top speeds...
• Easy fitment using standard mounting points.
• IJSBA legal all classes....
• DOES NOT SUIT IBR MODELS

Instructions

Get the party started with our Upgrade Kits! Whether you're looking to just kick off your modifications or you're looking to get your ski races ready, these upgrade kits are the perfect package.

The combination of parts in each of these kits are perfectly designed to pair well and draw the maximum amount of performance out of your ski whilst still maintaining ski life. Each upgrade level is relatively easy to install for any mechanically minded individual!

Model Fitment

2016-2017 Seadoo RXPX 300

Parts Included  

Get the party started with our Upgrade Kits! Whether you're looking to just kick off your modifications or you're looking to get your ski races ready, these upgrade kits are the perfect package.

The combination of parts in each of these kits are perfectly designed to pair well and draw the maximum amount of performance out of your ski whilst still maintaining ski life. Each upgrade level is relatively easy to install for any mechanically minded individual!

Model Fitment

2016-2017 Seadoo RXTX 300

Parts Included 

WORX Sea-Doo Free Flow Exhaust Elbow – 2016+ Models

A favourite among Sea-Doo owners, this is one of the quickest upgrades you can make! The WORX Free Flow Exhaust Elbow replaces the restrictive OEM sound suppression baffle in 2017+ models (excluding Spark) and 2016+ 300HP skis—giving your ride a louder, deeper exhaust note in just 15 minutes.

?? Quick & easy install – 15 mins
?? Tough black-coated aluminium
?? Improves sound + allows easier intercooler access
?? Guaranteed to turn heads on the water

Fits:
• 2016+ RXP-X, RXT-X, GTX LTD 300hp models
• 2017+ Naturally Aspirated GTI, GTR, GTX, GTI 900 ACE models (excludes Spark)

Heads up! All aftermarket exhausts (yep, even ours) are significantly louder than stock. 

If you’re keen to turn heads and sound like a total weapon, this is the upgrade for you.

If your idea of fun is peace, quiet, and hearing your own thoughts... stock’s calling. Probably with a cup of chamomile.

Instructions

Download Instructions

Fitment

• 2016-2020 Sea-Doo
• 2016-2020 Sea-Doo 4-TEC

 Get the party started with our Upgrade Kits! Whether you're looking to just kick off your modifications or you're looking to get your ski races ready, these upgrade kits are the perfect package.

The combination of parts in each of these kits are perfectly designed to pair well and draw the maximum amount of performance out of your ski whilst still maintaining ski life. Each upgrade level is relatively easy to install for any mechanically minded individual!

Model Fitment

2017-2019 Seadoo GTR 230

Parts Included 

New from WORX Racing - Billet Anodised iBR/iTC Switch Panel housings to suit aftermarket handlebars when combined with our Steering System.

-Suit 2018+ RXTX, RXPX, GTX models with new switch panels (LH side)

- Adjustable to suit riding hand postions for ultimate control

- OEM switch panel drops straight in (requires NO modifications)  

- For use with aftermarket handlebars combined with WORX Racing Steering System

Fitment

• 2018-2020 Sea-Doo

New from WORX Racing - Billet Anodised iBR/iTC Switch Panel housings to suit aftermarket handlebars when combined with our Steering System.

-Suit 2018+ RXTX, GTX models with new switch panels (RH side with cruise)

- Adjustable to suit riding hand postions for ultimate control

- OEM switch panel drops straight in (requires NO modifications)  

- For use with aftermarket handlebars combined with WORX Racing Steering System

Fitment

• 2018-2020 Sea-Doo

New from WORX Racing - Billet Anodised iBR/iTC Switch Panel housings to suit aftermarket handlebars when combined with our Steering System.

-Suit 2018+ RXPX 300 models with new switch panels (RH side WITHOUT cruise)

- Adjustable to suit riding hand postions for ultimate control

- OEM switch panel drops straight in (requires NO modifications)  

- For use with aftermarket handlebars combined with WORX Racing Steering System

Fitment

• 2018-2020 Sea-Doo

Not happy with how your ski currently handles? Want to upgrade the look of your ski? Designed not just for cutting edge performance but killer style, the WR561-I sponsons are the perfect upgrade for your Seadoo ski!

Made for Seadoo RXTX 2018+ and RXP-X 2021+ models, these sponsons have been specifically designed to improve the handling performance of your Seadoo ski. 

Worx Racing components WR561-I Sponsons are not just replacement paddles but also include an ‘Angle Cut Adjustable Backing Rail’ which runs parallel with the bottom of the ski and is designed to reduce nose pressure at high speeds and will let the nose settle down when you're off the throttle & entering the corner.

Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions.

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Adjustable Backing Rails
• 2 x Adjustable Paddles
• All Fasteners Needed

Does not fit GTX ST3/RXT 230 Models

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Instructions

Download Instructions

Fitment

• 2018-2020 Sea-Doo
• 2018-2020 Sea-Doo RXTX, RXPX

WORX Racing Sea-Doo Performance Air filter kits allows maximum air flow to feed your high performance engine via our huge WORX Racing 4 inch marine flame arrestor, easy mount adaptor, flexible 4-inch Kanaflex hose and our tapered Supercharger mount. By removing restrictive OEM intake system and allowing filter placement in cooler areas inside the hull, this allows for lower intake temps resulting in better acceleration and an increase in top RPM’s.

• 4 inch supercharger adaptor
• Huge high flow 4-inch Flame arrestor with silicone end cap and stainless binding band idea for saltwater environment.
• CNC Billet anodised 4-inch adaptor mounts easily to hull with multiple mount points. Tapped ½ inch thread for extra fittings if required.
• Kanaflex flexible 4 inch hose with ribbed wall for strength.
• All hardware, clamps and crankcase breather filter included in kit.
• NEW Purpose Designed hull mounting bracket that fits to hull (requires drilling 2 x 6mm holes to mount bracket)
• SUITS 2018+ RXTX 300 ST3 and GTX Lim 300 ST3 Hulls ONLY

Instructions

Fitment

• 2018-2020 Sea-Doo
• 2018-2020 Sea-Doo RXTX

Our Worx Racing Seadoo RXTX Air filter kit allows for maximum air flow to your engine via a huge 4-inch flame arrestor. Our tapered smooth bore moulded silicone hose fits directly onto your Seadoo OEM supercharger front housing for easy installation and our Billet anodised 4 inch air filter bracket is easily secured to the hull in a dry but accessible location.

Instructions

Fitment

• 2018 Sea-Doo
• 2018 Sea-Doo RXTX

Instructions

Fitment

• 2012-2017 Sea-Doo
• 2012-2017 Sea-Doo GTR 230, RXTX

WORX Racing Sea-Doo Performance Air filter kits allows maximum air flow to feed your high performance engine via our huge WORX Racing 4 inch marine flame arrestor, easy mount adaptor, flexible 4-inch Kanaflex hose and our tapered Supercharger mount. By removing restrictive OEM intake system and allowing filter placement in cooler areas inside the hull, this allows for lower intake temps resulting in better acceleration and an increase in top RPM’s.

4 inch supercharger adaptor
Huge high flow 4-inch Flame arrestor with silicone end cap and stainless binding band idea for saltwater environment.
CNC Billet anodised 4-inch adaptor mounts easily to hull with multiple mount points. Tapped ½ inch thread for extra fittings if required.
Kanaflex flexible 4 inch hose with ribbed wall for strength.
All hardware, clamps and crankcase breather filter included in kit.
NEW Purpose Designed hull mounting bracket that fits to hull with no drilling

Instructions

Fitment

• 2020 Sea-Doo

Want to corner tighter and faster? Make your jet ski feel like it's turning on rails with Worx Racing Component's WR564-I Sponsons.

Made for Seadoo 2020 GTI, GTS & GTR models, these sponsons have been specifically designed to improve the handling performance of your Seadoo ski. Initial testing found the GTR and GTIs unreliable in straight line handling and had a tendency to chine walk. The new sponsons directly combat that and reduce the need for constant steering adjustments when travelling in a straight line.

With included spacers and 4 position adjustable paddles, and optional spacers, you're able to select from 8 different positions to tune in the lean-in-handling characteristics of your jetski, making your ski's handling more or less aggressive!

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Adjustable Paddles
• 2 x Spacers
• All Fasteners Needed

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Fitment

• 2011-2021, 2023-2025 Sea-Doo

Want to upgrade your RXPX to better suit your riding style? The Worx Seadoo's Steering systems are perfect for any rider that wants to up their setup! Whether you've got a fresh new set of bars you want to put on, or you want to get the whole setup, Worx has got you covered!

• All setups retain OEM functions

• Improved ergonomics provide a more comfortable ride with less wrist strain

• Adjustable throttle/reverse housing and handlebar position

• Stems constructed from superior grade anodised billet aluminium for increased strength and durability over the failure-prone plastic OEM unit

• Allows for high quality aftermarket 7/8" (22mm) handlebar installation

Instructions

Download Instructions

Fitment

• Sea-Doo
• Sea-Doo RXPX

High Strength Bolt kit for direct replacement of OEM Flywheel bolts that are prone to failure on modified watercraft.

Suits all Yamaha 1.8 models

Suit SeaDoo 4-tec 1503 and 1630 ACE engine

Sold in Pack of 6

Instructions

Fitment

• 2020 Sea-Doo

Billet anodised construction

Fits 7/8 handle bars

Suits All style 4-tec DESS Posts

Fitment

• Sea-Doo

Elite Flow Lock-On Grips (130mm)

Fitment

• Sea-Doo

Rogue Watercraft grips are designed for optimal control in wet conditions. The grip's narrow diamonized surface pattern provides an excellent gripping system and the Lock-On design offers 100% slip-free performance. Guaranteed.

PRODUCT FEATURES:

• 130mm Length
• 7/8" (22mm) Inner Diameter
• Large Raised Pads and Deep Grooves
• Knurled Surface Pattern for Better Traction
• No Flange
• 100% Slip-Free Performance
• Includes new Snap Cap End Plugs

Fitment

• Sea-Doo

Ruffian Watercraft grips are designed for optimal control in wet conditions. The grip's narrow diamonized surface pattern provides an excellent gripping system and the Lock-On design offers 100% slip-free performance. Guaranteed.

PRODUCT FEATURES:

• 130mm Length
• 7/8" (22mm) Inner Diameter
• Large Raised Pads and Deep Grooves
• Knurled Surface Pattern for Better Traction
• No Flange
• 100% Slip-Free Performance
• Includes new Snap Cap End Plugs

Fitment

• Sea-Doo

Ruffian Watercraft grips are designed for optimal control in wet conditions. The grip's narrow diamonized surface pattern provides an excellent gripping system and the Lock-On design offers 100% slip-free performance. Guaranteed.

PRODUCT FEATURES:

• 130mm Length
• 7/8" (22mm) Inner Diameter
• Large Raised Pads and Deep Grooves
• Knurled Surface Pattern for Better Traction
• No Flange
• 100% Slip-Free Performance
• Includes new Snap Cap End Plugs

Fitment

• Sea-Doo

The ODI/Troy Lee Designs Signature Series grips are designed for optimal control in wet conditions. Grooved Channels prevent water buildup while overmolded flaps give added protection on outside clamp.

PRODUCT FEATURES:

• 130mm Length
• 7/8" (22mm) Inner Diameter
• Unique Undercut pads give slim comfortable feel with the ultimate amount of grip
• Custom flanged design provides hand support with more usable grip surface
• Etched Inside clamp provides clocking system to assist on installation
• Includes new Snap Cap End Plugs

Fitment

• Sea-Doo

Take your Sea-Doo Spark to the next level with the 2° or 4° Spark Pump Wedges, engineered for riders seeking smoother handling, faster rides, and improved lift. This versatile, easy-to-install wedge enhances your ski's performance without compromising stability, making it a perfect all-around upgrade.

Why Choose the 2° Pump Wedge?

• Reduced Drag = Increased Speed: Glide through the water more efficiently and gain extra performance.
• Lift the Nose: Helps the ski stay more balanced, especially at higher speeds.
• Less Nose Pressure: Reduces darting and improves control for smoother rides.
• All-Around Improvement: Ideal for cruising, freestyle, or playful water runs.
• Super Simple Fit: Quick bolt-on installation—no complicated modifications needed.

Why Choose the 4° Pump Wedge?

• Bounce Out of the Water More: Perfect for tricks, jumps, and freestyle stunts.
• Nose Stays Down at High Speeds: Enjoy aggressive riding without losing control.
• Decreased Drag = Increased Speed: Optimized for smooth water flow and faster rides.
• Super Simple Fit: Easy to install, minimal tools required.
• Freestyle Fun Guaranteed: Make your Spark more responsive and playful in the water.

Fitment to be confirmed for IBR models.

• ? Compatible with all Sea-Doo Spark models (2014+)
• ? Replaces OEM part numbers: #277001790 and #277002065
• ? Direct replacement – no modifications needed
• ? Easy to install with basic tools

Fitment

• Sea-Doo
• Sea-Doo Spark

A must for any Modified/ High Horsepower application for maximum fuel delivery

Increased fuel delivery for high boost/ high RPM engines

Requires remapped ECU or Aftermarket ECU to operate

Kit comes with all required Hardware and adaptors (3 injector kits included)

Fitment

• Sea-Doo

This complete kit includes (8) Washers, (8) Studs and (8) Nuts. Constructed from premium 8740 alloy our Stud Kit will provide more accurate and consistent torque loading.

A must have for any engine re-build or performance modifications!

Kit includes 8 x stud/nut/washer. Picture for illustration purpose only

Fitment

• Sea-Doo
• Sea-Doo 1503, 1630

This complete kit includes (8) Washers, (8) Studs and (8) Nuts. Constructed from premium 8740 alloy our Stud Kit will provide more accurate and consistent torque loading.

More accurate & consistent torque loading provides a more uniform clamping force on head gasket

Kit includes 8 x stud/nut/washer. Picture for illustration purpose only

Fitment

• Sea-Doo
• Sea-Doo 1503, 1630

Suits RXPX 300 T3 Hull and RXPX 260 T3 Hull models

Mounts to original backing rail.

Designed not just for cutting edge performance but killer style! Same best selling Worx Racing paddle now with billet insert for 4 point adjustment to personalise your watercraft to your own unique riding style! 

Adjustment of height means ability to control how much roll you want your watercraft to have entering a corner to suit your riding style.

Having the paddle close to vertical allows for more paddle grip and with Height Adjustability to control initial turn in and mid corner hold to suit your riding style.

Comes with backing rails and all necessary hardware!

Instructions

Fitment

• 2012-2020 Sea-Doo
• 2012-2020 Sea-Doo RXPX

Want to feed your supercharger the air it craves? This WR04067 Worx Racing Air Filter Kit ditches the restrictive stock setup and delivers maximum airflow straight to your engine with a huge 4-inch flame arrestor. More air = more power, more acceleration, and higher RPMs, because fast should be faster.

?? NOW WITH RED INTERIOR! Tougher, more durable, and built for serious performance.

? Massive 4-Inch Flame Arrestor – More airflow, more power, plus a silicone end cap and stainless binding band for saltwater durability (J 1928 USCG Approved).
? Billet Anodized 4-Inch Adapter – Easily mounts to the hull in a dry but accessible location.
? Smooth Bore Silicone Hose – Tapers down for a seamless fit to your supercharger, eliminating intake turbulence.
? Instant Throttle Response – Increased acceleration and RPMs for an instant performance boost.
? Race-Proven Design – Built for modified and race watercraft that demand max performance.
? Engine Breather Filter Included – Because we thought of everything.

More air. More power. More speed. Upgrade now.

Instructions

Download Instructions

Fitment

• 2020 Sea-Doo
• 2020 Sea-Doo RXPX

Fitment

• 2018-2020 Sea-Doo
• 2018-2020 Sea-Doo GTR 230, RXTX

Complete black anodised billet construction to increase durability and prevent against corrosion. 

Specifically designed to create even pressure in the reduction nozzle to reduce pump cavitation at RPM increase. Increases acceleration, drive and top speed.

Suits all new '3 bolt' Seadoo Style Pumps. 

Does not suit Seadoo Spark.

Fitment

• Sea-Doo

WORX Sea-Doo Free Flow Exhaust Elbow – 4-Tec Models

Upgrade your Sea-Doo’s performance and sound with the WORX Free Flow Exhaust Elbow. This direct replacement for the OEM sound suppression baffle frees up your exhaust flow, giving you improved throttle response and a noticeably sportier exhaust note.

?? Black anodised aluminium
?? Easy bolt-on install
?? Built for all Sea-Doo 4-Tec watercraft (except 300hp models)

Note:
Some early models (like the 2004 RXP) may require modification.
Not compatible with 2002–2003 GTX.
All 2017+ models require part No: WR04029 instead.
If you’re unsure, just reach out – we’re here to help.

Heads up! All aftermarket exhaust mods (yep, even ours) will make your ski significantly louder than stock. 

If you’re keen to turn heads and sound like a total weapon, this is the upgrade for you.

If your idea of fun is peace, quiet, and hearing your own thoughts... keep it stock ??

Instructions

Download Instructions

Fitment

• Sea-Doo
• Sea-Doo 4-TEC

-160 Deg (ºF) thermostat a direct drop in replacement for OEM unit in Sea-Doo 4-tec models

- Lowers engine temps up to 30 degs (ºF)

- A must for any modified Sea-Doo engine that retains OEM cooling system operating under high load or in Hotter climates

Fitment

• 2005-2020 Sea-Doo
• 2005-2020 Sea-Doo 4-TEC

Want to revive your old ski? Looking for a way to reignite your passion for the water? Look no further than Worx WR504 Sponsons!

Made for Seadoo 92-96 SP, SPI, XP, SPX models, these sponsons have been specifically designed to improve the handling performance of your Seadoo ski. 

Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions.

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Adjustable Paddles
• All Fasteners Needed

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Instructions

Fitment

• 1992-1997 Sea-Doo

Fitment

• 1996-2005 Sea-Doo

Want to revive your old ski? Looking for a way to reignite your passion for the water? Look no further than Worx WR510 Sponsons!

Made for Seadoo 97 SP, SPI, XP, SPX models, these sponsons have been specifically designed to improve the handling performance of your Seadoo jetski. 

Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions. With the adjustability of two positions, you can tailor the positioning to your riding style!

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Adjustable Paddles
• All Fasteners Needed

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Instructions

Fitment

• 1997 Sea-Doo

Billet anodized construction

Allows fitment of 130mm ODI lock grips

Easy install

Billet endcap design to prevent grip sliding off if lock clamp fails

Included hardware

DOES NOT FIT SPARK Models or New ST3 2018 model steering

NOTE: Grips NOT Included 

Download Reflash Form/Explanation

Fitment

• Sea-Doo

WORX Racing  All NEW Billet Anodised iBR (reverse) Electronic actuator housing which utilises OEM electronic actuators up on the handle bars (no throttle cables required),

- Billet anodised construction

- Utilises OEM electronic actuator which drops into new housing for OEM electronic trigger feel

- Suits all Sea-Doo models with  iBR

- Clamp on Handle bar design allows for adjustability of throttle position and angle

Fitment

• 2012-2020 Sea-Doo

WORX Racing All NEW Billet Anodised Throttle Electronic actuator housing which utilises OEM electronic actuators up on the handle bars (no throttle cables required),

- Billet anodised construction

- Utilises OEM electronic actuator which drops into new housing for OEM electronic trigger feel

- Suits all Sea-Doo models with  iTC

- Clamp on Handle bar design allows for adjustability of throttle position and angle

Fitment

• 2012-2020 Sea-Doo

Worx Racing Seadoo Sponsons are designed specifically to increase the handling performance of Seado GS, GSI, GSX LTD & GSX RFI Jetskis. Easily one of the easiest parts to upgrade on your ski. Worx recommend sponsons as one of the first upgrades to you make!

Adjustable to individual riding style and ability, these Seadoo sponsons are perfect for any Jetski enthusiast, whether you're just out on the weekend with your mates, or riding professionally. And because they're compatible with various aftermarket hulls, you can be sure they're the right call. 

Constructed from Marine Grade Aluminium, these sponsons will have you running rings around your mates!

Instructions

Fitment

• 1996-2001 Sea-Doo

This intake grate will improve the all round handling and performance of your boat in all water conditions without costing you any top end speed. Providing the ultimate hook up and increased top end speed, our WR208 is equally at home on a family weekender as it is on a full house competition race boat.

Instructions

Fitment

• 1996-2005 Sea-Doo

The Worx WR212 will give you great hook up in all water conditions with no cavitation off the mark no matter how hard you accelerate, and in the rough water you will gain drive and control.

Instructions

Fitment

• 1993-2003 Sea-Doo

WORX Racing Sea-Doo Performance Air filter kits allows maximum air flow to feed your high performance engine via our huge WORX Racing 4 inch marine flame arrestor, easy mount adaptor, flexible 4-inch Kanaflex hose and our tapered Supercharger mount. By removing restrictive OEM intake system and allowing filter placement in cooler areas inside the hull, this allows for lower intake temps resulting in better acceleration and an increase in top RPM’s.

• 4 inch supercharger adaptor
• Huge high flow 4-inch Flame arrestor with silicone end cap and stainless binding band idea for saltwater environment.
• CNC Billet anodised 4-inch adaptor mounts easily to hull with multiple mount points. Tapped ½ inch thread for extra fittings if required.
• Kanaflex flexible 4 inch hose with ribbed wall for strength.
• All hardware, clamps and crankcase breather filter included in kit.
• Purpose designed hull mounting bracket that fits to hull with no drilling

Fitment

• 2011-2020 Sea-Doo
• 2011-2020 Sea-Doo 4-TEC