Fitment

• 1996-2004 Yamaha

Get the party started with our Upgrade Kits! Whether you're looking to just kick off your modifications or you're looking to get your ski races ready, these upgrade kits are the perfect package.

The combination of parts in each of these kits are perfectly designed to pair well and draw the maximum amount of performance out of your ski whilst still maintaining ski life. Each upgrade level is relatively easy to install for any mechanically minded individual!

Model Fitment

2008-2011 Yamaha FX SHO

Parts Included 

Includes all bearing and plates that are not available to buy seperatly OEM

SVHO back plate allow use of SVHO wheels in SHO chargers if front housing is modified.

New thrust plate, bearing and rings to suit OEM and aftermarket shafts

Service kit for worn or failed chargers

NOTE: WORX has thoroughly tested this product in a range of worn and failed chargers. We encourage thorough inspection of failed charger housings. Damage or excessive wear to housings where shaft bearings locate are non repairable. Service Kit is designed to replace old OEM components that have excessive wear or have failed. 

Only experienced mechanics should attempt this installation.

Fitment

• Yamaha

Rear Exhaust Kit – Yamaha GP1800, FX, FZ (2008–2018) & VXR/VXS (2015+)

Take your ski to the next level with our high-performance rear exhaust kit, designed to eliminate restriction, boost power, and give your ride that aggressive, race-ready look. Featuring a massive 3-inch black billet anodised outlet, this kit gives your ski a tough note ???? and means business—on and off the water.

? Moulded black silicone hose – for a smooth, easy installation

? 3-inch billet anodised exhaust outlet – bold, blacked-out, and built to perform

? Billet anodised block-off plate – clean and durable finish

? Deletes restrictive sound suppression baffles – freeing up power and improving flow

? Silicone hose design – helps reduce drone and exhaust resonance

? Essential for high-horsepower and race applications

Full disclaimer: All aftermarket exhausts—ours included—will make your ski noticeably louder.
If you want to turn heads and sound as tough as you ride, this is the upgrade for you. If not... the stock setup might be more your style ??

Instructions

Download Instructions

Fitment

• 2015-2019 Yamaha

Our  Launch Kit sets the ultimate foundation for any one wanting to upgrade their Superjet. We have all of your handling needs covered. This kit includes:

* Our famous WR228 Intake Grate designed with a deeper scoop for improved hook up and turning for all styles of riding

* Our best selling WR312 Intake Grate  for greater stability, drive and control

* WR544 Sponsons constructed from marine grade aluminum and adjustable to suit your style of riding

* WR04041  Exhaust Sleeve fits directly into the OEM exhaust muffler and reduces the stinger size of the pipe to create more back pressure in the pipe for increased top speed.

Model Fitment

Yamaha Superjet 2008-2020

Parts Included

Get the party started with our Upgrade Kits! Whether you're looking to just kick off your modifications or you're looking to get your ski race ready, these upgrade kits are the perfect package.

The combination of parts in each of these kits are perfectly designed to pair well and draw the maximum amount of performance out of your ski whilst still maintaining ski life. Each upgrade level is relatively easy to install for any mechanically minded individual!

Model Fitment

2009-2013 Yamaha FZR/FZS SHO

Parts Included

Get the party started with our Launch Kit! This combination of parts is the ideal platform for kicking off your modifications and can be easily added to over time to further upgrade your jetski. Designed to extract the best possible potential from your standard watercraft , this level of kit includes parts that any mechanically minded individual should be able to install.

1) WR04043 Air Filter Kit allows maximum air flow to your engine.

2) WR04001 Ribbon Remover replaces the restrictive mesh element in the intake manifold and  increases air flow to the engine, maximizing horsepower.

3) WR240 Intake Grate enhances stability control, turning capability, hook up and improves handling in rough water conditions.

4) WR0704 Pump Seal kit fits into the voids of your WR240 Intake Grate to reduce cavitation and maximise pump efficiency and performance.

5) YS-CD-13/19 Solas Impeller will give you better performance (1-2 MPH Gain) over your stock impeller. You will also see reduced cavitation, better holeshot with increased acceleration. 

6) WR04033 Pump Strainer to increase water flow into engine and lower engine temps.

7) WR03003 ECU Reflash all OEM functions are retained and you can expect significantly improved acceleration, fuel economy, better top speed and overall maximised performance.  Please note we perform this on your stock ECU and will require you to send this to us. WORX aim to perform this service the same or next business day the ECU is received and will return your ECU to you via a fully trackable overnight service.

Model Fitment

2011-2014 Yamaha VXR/VXS

Parts Included 

Get the party started with our Upgrade Kits! Whether you're looking to just kick off your modifications or you're looking to get your ski races ready, these upgrade kits are the perfect package.

The combination of parts in each of these kits are perfectly designed to pair well and draw the maximum amount of performance out of your ski whilst still maintaining ski life. Each upgrade level is relatively easy to install for any mechanically minded individual!

Model Fitment

2012-2013 Yamaha FX SHO

Parts Included 

Get the party started with our Launch Kit! This combination of parts is the ideal platform for kicking off your modifications and can be easily added to over time to further upgrade your jetski. Designed to extract the best possible potential from your standard watercraft , this level of kit includes parts that any mechanically minded individual should be able to install.

Model Fitment

2012-2017 Yamaha FX HO

Parts Included 

Get the party started with our Upgrade Kits! Whether you're looking to just kick off your modifications or you're looking to get your ski race ready, these upgrade kits are the perfect package.

The combination of parts in each of these kits are perfectly designed to pair well and draw the maximum amount of performance out of your ski whilst still maintaining ski life. Each upgrade level is relatively easy to install for any mechanically minded individual!

Model Fitment

2014-2016 Yamaha FZR/FZS SVHO

Parts Included 

Get the party started with our Upgrade Kits! Whether you're looking to just kick off your modifications or you're looking to get your ski race ready, these upgrade kits are the perfect package.

The combination of parts in each of these kits are perfectly designed to pair well and draw the maximum amount of performance out of your ski whilst still maintaining ski life. Each upgrade level is relatively easy to install for any mechanically minded individual!

Model Fitment

2014-2017 Yamaha FX SVHO

Parts Included 

Get the party started with our Launch Kit! This combination of parts is the ideal platform for kicking off your modifications and can be easily added to over time to further upgrade your jetski. Designed to extract the best possible potential from your standard watercraft , this level of kit includes parts that any mechanically minded individual should be able to install.

1) WR04043 Air Filter Kit  allows maximum air flow to your engine.

2) WR04001 Ribbon Remover replaces the restrictive mesh element in the intake manifold and  increases air flow to the engine, maximizing horsepower.

3) WR246 Intake Grate enhances stability control, turning capability, hook up and improves handling in rough water conditions.

4) WR0710 Pump Seal kit fits into the voids of your WR246 Intake Grate to reduce cavitation and maximise pump efficiency and performance.

5) YS-CD-13/19 Solas Impeller will give you better performance (1-2 MPH Gain) over your stock impeller. You will also see reduced cavitation, better holeshot with increased acceleration. 

6) WR04033 Pump Strainer to increase water flow into engine and lower engine temps.

7) WR03003 ECU Reflash all OEM functions are retained and you can expect significantly improved acceleration, fuel economy, better top speed and overall maximised performance.  Please note we perform this on your stock ECU and will require you to send this to us. WORX aim to perform this service the same or next business day the ECU is received and will return your ECU to you via a fully trackable overnight service.

8) WR06021 Trim Extension increases trim range to bring the nose of your boat higher and increase speed.

Model Fitment

2015-2017 Yamaha VXR/VXS

Parts Included 

Get the party started with our Upgrade Kits! Whether you're looking to just kick off your modifications or you're looking to get your ski races ready, these upgrade kits are the perfect package.

The combination of parts in each of these kits are perfectly designed to pair well and draw the maximum amount of performance out of your ski whilst still maintaining ski life. Each upgrade level is relatively easy to install for any mechanically minded individual!

Model Fitment

2017+ Yamaha GP1800 SVHO

Parts Included 

Get the party started with our Upgrade Kits! Whether you're looking to just kick off your modifications or you're looking to get your ski race ready, these upgrade kits are the perfect package.

The combination of parts in each of these kits are perfectly designed to pair well and draw the maximum amount of performance out of your ski whilst still maintaining ski life. Each upgrade level is relatively easy to install for any mechanically minded individual!

Model Fitment

2019 Yamaha FX SVHO

Parts Included 

Get the party started with our Upgrade Kits! Whether you're looking to just kick off your modifications or you're looking to get your ski race ready, these upgrade kits are the perfect package.

The combination of parts in each of these kits are perfectly designed to pair well and draw the maximum amount of performance out of your ski whilst still maintaining ski life. Each upgrade level is relatively easy to install for any mechanically minded individual!

Model Fitment

Yamaha 2020 FX SVHO 

Parts Included 

• Fits Yamaha SuperJet 2021+ models
• 2° pump wedge Increases Bow Lift, reduces drag for higher speed
• Improves Handling - better turning response and stability
• Ideal for all styles of riding - surf, freeride, and high-speed flatwater
• Includes stainless steel mounting bolts for easy installation
• Made from durable, marine-grade materials

Fitment

• Yamaha
• Yamaha SuperJet

Looking for a quick and easy solution to the lack of Trim on your Yamaha Jetski? Look no further than the Yamaha Trim extension! This extension has been specifically designed to increase your trim range and bring the nose of your ski higher, resulting in reduced surface drag and an added increase to stop speed.

As a cost-effective upgrade, you can expect to see an impressive 1-2 MPH increase in good riding conditions. And the best part? It fits 2022+ Yamahas, so you can enjoy all the benefits of increased trim range without any hassle. Don't be held back by stock limitations, upgrade to the Yamaha Trim extension today!

Instructions

Fitment

• Yamaha

Upgrade your ride with the WORX Racing Freeflow Exhaust — designed for performance, sound, and simplicity. Our exhaust features a high-quality silicone hose, making installation faster and easier than traditional setups. No drilling or additional holes are required, so you can bolt it on and enjoy instantly.

Experience increased throttle response and a deeper, more aggressive sound that enhances your ride without compromising performance. Built for riders who demand effortless installation, superior quality, and that signature WORX Racing tone.

Key Features:

• Premium silicone hose for easy fitment, engineered from high thread silcone hose to absorb drone

• No hole required — simple bolt-on installation

• Enhanced exhaust sound for a more aggressive ride

• Designed for reliability and performance

• Kit includes, silicone hose, billet outlet, gasket and all required hardware

High Strength Bolt kit for direct replacement of OEM Flywheel bolts that are prone to failure on modified watercraft.

Suits all Yamaha 1.8 models

Suit SeaDoo 4-tec 1503 and 1630 ACE engine

Sold in Pack of 6

Instructions

Fitment

• 2020 Sea-Doo

Billet anodised construction

Fits 7/8 handle bars

Suits All style 4-tec DESS Posts

Fitment

• Sea-Doo

This engine cooling adapter allows you to deliver additional cooling water to the engine block. The cooling adapter is precision machined from billet aluminum and anodized for increased corrosion protection.

Fits all Yamaha 1.8L engines from 2008 to present.

Increase speed and achieve a drier ride by raising the bow of your watercraft with this 2 degree pump wedge. The extra angle creates more lift in the hull and less drag, which typically increases top speed by around 1-2 MPH. This pump wedge is machined from billet aluminum and is anodized to help protect against corrosion. It has easy installation as the wedge fits directly between where the venturi nozzle bolts to the jet pump housing.

Fits all Yamaha 1.8L and 1.9L Yamaha watercraft 2008 to present

This adapter mount allows you to install a Bosch oxygen sensor for tuning purposes onto any 2012 and newer Yamaha SVHO, SHO or HO watercraft. This adapter easily installs between the factory exhaust pipe and manifold. Included are new gaskets, stainless steel mounting bolts, and a stainless steel block-off plug with sealing washer to block-off the sensor when not in use. The adapter mount is precision machined from billet aluminum and anodized for increased corrosion protection.

Fits all 1.8L and 1.9L Yamaha HO, SHO and SVHO watercraft from 2012 to present

Elite Flow Lock-On Grips (130mm)

Fitment

• Sea-Doo

Rogue Watercraft grips are designed for optimal control in wet conditions. The grip's narrow diamonized surface pattern provides an excellent gripping system and the Lock-On design offers 100% slip-free performance. Guaranteed.

PRODUCT FEATURES:

• 130mm Length
• 7/8" (22mm) Inner Diameter
• Large Raised Pads and Deep Grooves
• Knurled Surface Pattern for Better Traction
• No Flange
• 100% Slip-Free Performance
• Includes new Snap Cap End Plugs

Fitment

• Sea-Doo

Ruffian Watercraft grips are designed for optimal control in wet conditions. The grip's narrow diamonized surface pattern provides an excellent gripping system and the Lock-On design offers 100% slip-free performance. Guaranteed.

PRODUCT FEATURES:

• 130mm Length
• 7/8" (22mm) Inner Diameter
• Large Raised Pads and Deep Grooves
• Knurled Surface Pattern for Better Traction
• No Flange
• 100% Slip-Free Performance
• Includes new Snap Cap End Plugs

Fitment

• Sea-Doo

Ruffian Watercraft grips are designed for optimal control in wet conditions. The grip's narrow diamonized surface pattern provides an excellent gripping system and the Lock-On design offers 100% slip-free performance. Guaranteed.

PRODUCT FEATURES:

• 130mm Length
• 7/8" (22mm) Inner Diameter
• Large Raised Pads and Deep Grooves
• Knurled Surface Pattern for Better Traction
• No Flange
• 100% Slip-Free Performance
• Includes new Snap Cap End Plugs

Fitment

• Sea-Doo

The ODI/Troy Lee Designs Signature Series grips are designed for optimal control in wet conditions. Grooved Channels prevent water buildup while overmolded flaps give added protection on outside clamp.

PRODUCT FEATURES:

• 130mm Length
• 7/8" (22mm) Inner Diameter
• Unique Undercut pads give slim comfortable feel with the ultimate amount of grip
• Custom flanged design provides hand support with more usable grip surface
• Etched Inside clamp provides clocking system to assist on installation
• Includes new Snap Cap End Plugs

Fitment

• Sea-Doo

Want that extra level of protection? 

Worx Racing Pre-Filter wraps are designed to give you that extra peace of mind when it comes to your Air Filter. Designed to keep your Air Filter dry through extreme rides, while still ensuring maximum air flow to your ski.

Perfectly fits our Seadoo Spark Air Filter Upgrade! 

Made from a durable, water repellent polyester material, these pre-filters guarantee extra life for your air filter and ski and provide a perfect fit for your Worx Seadoo Spark Air Filter!

Fitment

• Sea-Doo
• Sea-Doo Spark

Elevate your Yamaha watercraft’s performance with the Solas YJ-CD-12/17 Concord Yamaha Impeller. Engineered to deliver exceptional acceleration, top speed, and handling, this high-performance impeller is the perfect upgrade for Yamaha enthusiasts seeking to enhance their riding experience and achieve maximum performance.

Key Features:

• Advanced Blade Design: The 12/17 pitch and innovative blade geometry deliver superior acceleration and increased top-end speed, optimizing your Yamaha’s performance on the water.
• High-Quality Construction: Crafted from durable, corrosion-resistant materials, this impeller is built to withstand harsh marine environments and provide long-lasting reliability.
• Precision Engineering: Ensures a perfect fit, reducing cavitation and enhancing overall ride quality while improving fuel efficiency.
• Optimized for Yamaha Models: Specifically designed to fit a wide range of Yamaha watercraft, ensuring seamless compatibility and enhanced performance.
• Easy Installation: User-friendly design allows for straightforward installation, making it accessible for both professional mechanics and DIY enthusiasts.

Benefits:

• Enhanced Performance: Experience a significant boost in acceleration and top speed, ideal for high-speed recreational riding and competitive racing.
• Improved Handling: The advanced blade design enhances handling and maneuverability, providing a smoother and more controlled ride.
• Increased Efficiency: The optimized design ensures efficient power delivery, reducing fuel consumption and extending engine life.
• Durable and Reliable: High-quality materials and precision construction ensure that this impeller will withstand the rigors of frequent use in various water conditions

?? You will require the WR001 Solas Spline Tool for Installation

Suits Following Models:

2021+ Superjet 

2017+ EX / EX Deluxe / EX Sport / EX Limited

Fitment

• 2017-2020 Yamaha

This combo is perfect for anywhere looking to upgrade or update their Prop & Pump Liner and already have or are considering purchasing an ECU reflash!

The larger blade area and better hub design of the Solas Impeller make for maximum performance. Pitched for more acceleration, top speed and RPM. This new prop easily out performs your OEM impeller.

Solas heavy-duty, 100% stainless steel wear rings/impeller liners are the perfect replacement for your damaged original unit. Durable solid stainless steel construction resists debris damage and saltwater corrosion.

Original Yamaha wear ring is constructed of cast aluminium with a thin stainless steel liner that is pressed into place. Corrosion quickly develops between the dissimilar metals swelling the thin liner until it closes down and jams against your impeller. 

Includes:
• YV-CD-13/18 Solas Prop
• YVS-HS-160 Solas Liner
• WR014H Solas Yamaha Tool

Fitment

• Yamaha
• Yamaha FX SVHO, FZR, FZS, GP1800

Larger blade are better hub design for maximum performance. Pitched for more acceleration and top speed and RPM. This new prop easily out performs your OEM impellor. A must for Reflashed skis.

Fitment

• 2014-2020 Yamaha
• 2014-2020 Yamaha FX SVHO, FZR, FZS, GP1800

Fitment

• 2009-2021, 2023 Yamaha
• 2009-2021, 2023 Yamaha FX HO, SHO, VXR, VXS

This combo is perfect for anywhere looking to upgrade or update their Prop & Pump Liner!

The larger blade area and better hub design of the Solas Impeller make for maximum performance. Pitched for more acceleration, top speed and RPM. This new prop easily out performs your OEM impeller.

Solas heavy-duty, 100% stainless steel wear rings/impeller liners are the perfect replacement for your damaged original unit. Durable solid stainless steel construction resists debris damage and saltwater corrosion.

Original Yamaha wear ring is constructed of cast aluminium with a thin stainless steel liner that is pressed into place. Corrosion quickly develops between the dissimilar metals swelling the thin liner until it closes down and jams against your impeller. 

Includes:
• YV-CD-13/20 Solas Prop
• YVS-HS-160 Solas Liner
• WR014H Solas Yamaha Tool

Fitment

• Yamaha
• Yamaha FX SVHO, FZR, FZS, GP1800

Larger blade are and better hub design for maximum performance. Pitched for more acceleration and top speed and RPM. This new prop easily out performs your OEM impeller.

Fitment

• 2014-2020 Yamaha
• 2014-2020 Yamaha FX SVHO, FZR, FZS, GP1800

These Solas Yamaha Waverunner impeller will give you better performance (1-2 MPH Gain) over your stock impeller. You will also see reduced cavitation, better holeshot with increased acceleration. The Solas Yamaha impellers pro design are made of stainless steel.

Fits 2008+ FZR Sho and FZS and 2008+ FX SHO and FX SHO Cruiser 

Fitment

• 2009-2020 Yamaha
• 2009-2020 Yamaha FX HO, SHO, VXR, VXS

This combo is perfect for anywhere looking to upgrade or update their Prop & Pump Liner!

The larger blade area and better hub design of the Solas Impeller make for maximum performance. Pitched for more acceleration, top speed and RPM. This new prop easily out performs your OEM impeller.

Solas heavy-duty, 100% stainless steel wear rings/impeller liners are the perfect replacement for your damaged original unit. Durable solid stainless steel construction resists debris damage and saltwater corrosion.

Original Yamaha wear ring is constructed of cast aluminium with a thin stainless steel liner that is pressed into place. Corrosion quickly develops between the dissimilar metals swelling the thin liner until it closes down and jams against your impeller. 

Includes:
• YS-CD-13/22 Solas Prop
• YFS-HS-155 Solas Liner
• WR014H Solas Yamaha Tool

Fitment

• Yamaha
• Yamaha FX HO, SHO, VXR, VXS

Solas heavy-duty, 100% stainless steel wear rings/impeller liners are the perfect replacement for your damaged original unit. Durable solid stainless steel construction resists debris damage and saltwater corrosion.

Original Yamaha wear ring is constructed of cast aluminium with a thin stainless steel liner that is pressed into place. Corrosion quickly develops between the dissimilar metals swelling the thin liner until it closes down and jams against your impeller.

Fitment

• Yamaha

Elevate your Yamaha watercraft’s performance with the Solas YH-CD-18/22 Yamaha Impeller. Designed for exceptional acceleration, top speed, and handling, this high-performance impeller is the perfect upgrade for riders seeking to optimize their watercraft’s capabilities and achieve maximum performance.

Key Features:

• Advanced Blade Design: The 18/22 pitch and innovative blade geometry deliver superior acceleration and increased top-end speed, maximizing your Yamaha’s performance on the water.
• High-Quality Construction: Crafted from durable, corrosion-resistant materials, this impeller is built to withstand harsh marine environments and provide long-lasting reliability.
• Precision Engineering: Ensures a perfect fit, reducing cavitation and enhancing overall ride quality while improving fuel efficiency.
• Optimized for Yamaha Models: Specifically designed to fit a wide range of Yamaha watercraft, ensuring seamless compatibility and enhanced performance.
• Easy Installation: User-friendly design allows for straightforward installation, making it accessible for both professional mechanics and DIY enthusiasts.

Benefits:

• Enhanced Performance: Experience a significant boost in acceleration and top speed, ideal for high-speed recreational riding and competitive racing.
• Improved Handling: The advanced blade design enhances handling and maneuverability, providing a smoother and more controlled ride.
• Increased Efficiency: Optimized design ensures efficient power delivery, reducing fuel consumption and extending engine life.
• Durable and Reliable: High-quality materials and precision construction ensure that this impeller will withstand the rigors of frequent use in various water conditions.

Suits Following Models:

2005 - 2015 VX / VX Sport / VX Deluxe / VX Crusier

2015 V1 / V1 Sport

?? You will require the WR001 Solas Spline Tool for Installation

Fitment

• 2014-2020 Yamaha

This combo is perfect for anywhere looking to upgrade or update their Prop & Pump Liner and already have or are considering purchasing an ECU reflash!

The larger blade area and better hub design of the Solas Impeller make for maximum performance. Pitched for more acceleration, top speed and RPM. This new prop easily out performs your OEM impeller.

Solas heavy-duty, 100% stainless steel wear rings/impeller liners are the perfect replacement for your damaged original unit. Durable solid stainless steel construction resists debris damage and saltwater corrosion.

Original Yamaha wear ring is constructed of cast aluminium with a thin stainless steel liner that is pressed into place. Corrosion quickly develops between the dissimilar metals swelling the thin liner until it closes down and jams against your impeller. 

Includes:
• YS-CD-13/19 Solas Prop
• YFS-HS-155 Solas Liner
• WR014H Solas Yamaha Tool

Fitment

• Yamaha
• Yamaha FX HO, SHO, VXR, VXS

Fitment

• Yamaha

The new Solas Concord YX-CD-12/17 blows away the performance of your stock impeller! Large blade area and superior hub design deliver increased acceleration and top speed.

Designed for modified Yamaha EXR & JetBlaster applications with the 1,050cc TR-1 engine, the YX-CD-12/17 is featured in our Stage 1 Kits for Yamaha EXR & Yamaha JetBlaster models.

Fitment

• Yamaha