271 products
Sale
Quick View
Sale
Quick View
Sale
Quick View
Sale
Quick View
Sale
Quick View
Sale
Quick View
Sale
Quick View
Sale
Quick View
Sale
Quick View
Sale
Quick View
Sale
Quick View
Sale
Quick View
Sale
Quick View
Sale
Quick View
Sale
Quick View
Sale
Quick View
Sale
Quick View
Sale
Quick View
1996+ Yamaha WaveVenture, XL 1200 Sponsons
WR514
Regular price
$305.00
Want to revive your old ski? Looking for a way to reignite your passion for the water? Look no further than Worx WR514 Sponsons!
Made for Yamaha 1996+ WaveVenture and XL 1200 models, these sponsons have been specifically designed to improve the handling performance of your Yamaha ski.
Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions.
All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business.
Features:
- Improved direct response in cornering
- More predictable handling
- Greater straight line stability
- Made in Australia
Includes:
- 2 x Backing Rails
- 2 x Paddles
- All Fasteners Needed
Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.
Fitment
- 1996-2004 Yamaha
2006-2010 Seadoo GTI/GTI SE/GTI WAKE Intake Grate
WR226
Regular price
$225.00
These boats hook up pretty well in the calm but really benefit from our intake grate in choppy to rough water, the Worx intake grate will not cost you any top speed in the calm but will give you heaps better hook up and drive in the rough and around the track for closed course racing. This grate has two bars running the full length of the boat that hang down and stop the back of the boat from sliding out, the centre blade of the grate does most of the work in the straights and the side wings come into play in the corners to keep the pump fully loaded and reduce cavitation.
Instructions
Fitment
- 2006-2010 Sea-Doo
2008-2017 Yamaha Supercharger Rebuild Kit
WR04051
Regular price
$249.00
Includes all bearing and plates that are not available to buy seperatly OEM
SVHO back plate allow use of SVHO wheels in SHO chargers if front housing is modified.
New thrust plate, bearing and rings to suit OEM and aftermarket shafts
Service kit for worn or failed chargers
NOTE: WORX has thoroughly tested this product in a range of worn and failed chargers. We encourage thorough inspection of failed charger housings. Damage or excessive wear to housings where shaft bearings locate are non repairable. Service Kit is designed to replace old OEM components that have excessive wear or have failed.
Only experienced mechanics should attempt this installation.
Fitment
- Yamaha
2008-2018 Yamaha Rear Exhaust Kit
WR04045
Regular price
$385.00
Rear Exhaust Kit – Yamaha GP1800, FX, FZ (2008–2018) & VXR/VXS (2015+)
Take your ski to the next level with our high-performance rear exhaust kit, designed to eliminate restriction, boost power, and give your ride that aggressive, race-ready look. Featuring a massive 3-inch black billet anodised outlet, this kit gives your ski a tough note ???? and means business—on and off the water.
? Moulded black silicone hose – for a smooth, easy installation
? 3-inch billet anodised exhaust outlet – bold, blacked-out, and built to perform
? Billet anodised block-off plate – clean and durable finish
? Deletes restrictive sound suppression baffles – freeing up power and improving flow
? Silicone hose design – helps reduce drone and exhaust resonance
? Essential for high-horsepower and race applications
Full disclaimer: All aftermarket exhausts—ours included—will make your ski noticeably louder.
If you want to turn heads and sound as tough as you ride, this is the upgrade for you. If not... the stock setup might be more your style ??
Instructions
Fitment
- 2015-2019 Yamaha
2011-2019 Seadoo GTI, GTS, GTR Insert Edition Sponsons
WR553-I-S
Regular price
$490.00
Bored of the way your ski currently handles? Want to corner tighter and faster? Make your jet ski feel like it's turning on rails with Worx Racing Component's WR553-I Sponsons.
Made for Seadoo 2011-2019 GTI, GTS & GTR models, these sponsons have been specifically designed to improve the handling performance of your Yamaha ski. Select from 4 different positions to tune in the lean-in-handling characteristics of your jetski!
Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions.
All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business.
Features:
- Improved direct response in cornering
- More predictable handling
- Greater straight line stability
- Made in Australia
Includes:
- 2 x Backing Rails
- 2 x Paddles
- All Fasteners Needed
Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.
Instructions
Fitment
- 2011-2020 Sea-Doo
2018+ Seadoo RXTX & 2021+ RXPX Sponsons
WR561-I-S
Regular price
$490.00
Not happy with how your ski currently handles? Want to upgrade the look of your ski? Designed not just for cutting edge performance but killer style, the WR561-I sponsons are the perfect upgrade for your Seadoo ski!
Made for Seadoo RXTX 2018+ and RXP-X 2021+ models, these sponsons have been specifically designed to improve the handling performance of your Seadoo ski.
Worx Racing components WR561-I Sponsons are not just replacement paddles but also include an ‘Angle Cut Adjustable Backing Rail’ which runs parallel with the bottom of the ski and is designed to reduce nose pressure at high speeds and will let the nose settle down when you're off the throttle & entering the corner.
Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions.
All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business.
Features:
- Improved direct response in cornering
- More predictable handling
- Greater straight line stability
- Made in Australia
Includes:
- 2 x Adjustable Backing Rails
- 2 x Adjustable Paddles
- All Fasteners Needed
Does not fit GTX ST3/RXT 230 Models
Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.
Instructions
Fitment
- 2018-2020 Sea-Doo
- 2018-2020 Sea-Doo RXTX, RXPX
2020+ Seadoo GTR, GTI, GTS Sponsons With Spacers
WR564-I-S
Regular price
$490.00
Want to corner tighter and faster? Make your jet ski feel like it's turning on rails with Worx Racing Component's WR564-I Sponsons.
Made for Seadoo 2020 GTI, GTS & GTR models, these sponsons have been specifically designed to improve the handling performance of your Seadoo ski. Initial testing found the GTR and GTIs unreliable in straight line handling and had a tendency to chine walk. The new sponsons directly combat that and reduce the need for constant steering adjustments when travelling in a straight line.
With included spacers and 4 position adjustable paddles, and optional spacers, you're able to select from 8 different positions to tune in the lean-in-handling characteristics of your jetski, making your ski's handling more or less aggressive!
All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business.
Features:
- Improved direct response in cornering
- More predictable handling
- Greater straight line stability
- Made in Australia
Includes:
- 2 x Backing Rails
- 2 x Adjustable Paddles
- 2 x Spacers
- All Fasteners Needed
Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.
Fitment
- 2011-2021, 2023-2025 Sea-Doo
Honda F-12, F-12X, F-12 GPSCAPE Sponsons
WR531
Regular price
$330.00
The hook up and handling of this model ski is good in calm water but is left wanting in choppy to rough conditions. The WR531 Sponsons will go a long way to help get the power and performance out of these boats in all water conditions.
These sponsons will improve the turning and tracking of these boats to get the most out of their very powerful 4 stroke engine. The stock OEM sponsons only really help the back of the hull from settling to low in the water and do not come into play in turns, the Worx blade type sponson will hold the boat in the tightest turns and make it straight line track a lot better in choppy water and through boat wakes.
Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.
Instructions
Kawasaki 1200 STX R Sponsons
WR525
Regular price
$340.00
The OEM sponsons are a joke! They look adjustable but aren't and are fixed at the rear of the rail which gives the best top speed in only flat calm water, even in a light chop the boat bounces all over the place. It is hard to control and loses drive because the pump is out of the water more than it is.
But don't worry, WORX have saved the day!
The WORX Sponsons are truly adjustable only the full length of the backing rail as well as two different heights. The hull is the most reactive to sponson position that we have ever tested, for maximum top speed in calm water the sponson blades are best fitted in the fully forward position but even in the slightest chop the boat bounces all over the place. For maximum handling and hook-up on the race course, the fully back position is best but you sacrifice 1-3MPH (depending on the weight of the rider) because the boat rides a lot flatter. The ideal position is somewhere in between fully back and fully forward but is dependent on the rider weight, riding style and the type of riding that they are doing.
Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.
Fitment
- 2001-2005 Kawasaki
Kawasaki STX, STX 12F, 15F Sponsons
WR527-I
Regular price
$340.00
Want to revive your old ski? Looking for a way to reignite your passion for the water? Look no further than Worx WR527-I Sponsons!
Made for Kawasaki STX12F and 15F Sponsons models, these sponsons have been specifically designed to improve the handling performance of your Kawasaki ski.
Designed for full adjustability, these sponsons put your ride, completely in your hands! Not only is the paddle height adjustable but the forward and backward positioning options means that, for maximum top speed in calm water you can position your blades in the fully forward position or for maximum handling and hook up the fully back position is best!
All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business.
Features:
- Improved direct response in cornering
- More predictable handling
- Greater straight line stability
- Made in Australia
Includes:
- 2 x Backing Rails
- 2 x Paddles
- All Fasteners Needed
Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.
Instructions
Fitment
- 1997-2010 Kawasaki
Kawasaki STX750/900/1100 Sponsons
WR513
Regular price
$280.00
Want to revive your old ski? Looking for a way to reignite your passion for the water? Look no further than Worx WR513 Sponsons!
Made for Kawasaki STX750/900/1100 Sponsons models, these sponsons have been specifically designed to improve the handling performance of your Yamaha ski.
Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions, with two levels of adjustability, you're able to set the position that best suits your riding style!
All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business.
Features:
- Improved direct response in cornering
- More predictable handling
- Greater straight line stability
- Made in Australia
Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.
Instructions
Fitment
- 1997-2006 Kawasaki
Kawasaki SXR 800 Sponsons
WR528
Regular price
$150.00
Want to revive your old ski? Looking for a way to reignite your passion for the water? Look no further than Worx WR528 Sponsons!
Made for Kawasaki SX-R 800 Sponsons models, these sponsons have been specifically designed to improve the handling performance of your Kawasaki ski.
Designed to work perfectly paired with the WR310 or WR311 ride plates and WR222 or WR225 intake grates!
Theses sponsons fit under the gunnel beading on the bond line of the boat where the hull and deck are joined together and come into play when the boat is leaned over into the corners. The sponsons hold the ski on line in even the hardest turns and make getting those really tight corners look easy.
All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business.
Features:
- Improved direct response in cornering
- More predictable handling
- Greater straight line stability
- Made in Australia
Includes:
- 2 x Paddles
- All Fasteners Needed
Instructions
Fitment
- 2003-2011 Kawasaki
Kawasaki Ultra 300/310 Race Sponsons
WR547-I-S
Regular price
$490.00
Bored of the way your ski currently handles? Want to corner tighter and faster? Make your jet ski feel like it's turning on rails with Worx Racing Component's WR547-I Sponsons.
Made for Kawasaki Ultra 300/310 models, these sponsons have been specifically designed to improve the handling performance of your Kawasaki ski.
Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions.
All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business.
Features:
- Improved direct response in cornering
- More predictable handling
- Greater straight line stability
- Made in Australia
Includes:
- 2 x Backing Rails
- 2 x Paddles
- All Fasteners Needed
Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.
Instructions
Fitment
- 2011-2020 Kawasaki
- 2011-2020 Kawasaki Ultra 300
Kawasaki ZXI 900/1100 Sponsons
WR508
Regular price
$280.00
Bored of the way your ski currently handles? Want to corner tighter and faster? Make your jet ski feel like it's turning on rails with Worx Racing Component's WR508 Sponsons.
Made for Kawasaki ZXI 900/1100 models, these sponsons have been specifically designed to improve the handling performance of your Kawasaki ski.
Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions.
All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business.
Features:
- Improved direct response in cornering
- More predictable handling
- Greater straight line stability
- Made in Australia
Includes:
- 2 x Backing Rails
- 2 x Paddles
- All Fasteners Needed
Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.
Fitment
- 1995-2003 Kawasaki
