WORX RACING

2011-2019 Seadoo GTI, GTS, GTR Insert Edition Sponsons

WR553-I-S

$490.00

Bored of the way your ski currently handles? Want to corner tighter and faster? Make your jet ski feel like it's turning on rails with Worx Racing Component's WR553-I Sponsons.

Made for Seadoo 2011-2019 GTI, GTS & GTR models, these sponsons have been specifically designed to improve the handling performance of your Yamaha ski. Select from 4 different positions to tune in the lean-in-handling characteristics of your jetski!

Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions.

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business.

Features:

Improved direct response in cornering
More predictable handling
Greater straight line stability
Made in Australia

Includes:

2 x Backing Rails
2 x Paddles
All Fasteners Needed

Can change a tyre 15 Minutes

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Instructions

Fitment

2011-2020 Sea-Doo

2011-2019 Seadoo GTI, GTS, GTR Insert Edition Sponsons

2011-2019 Seadoo GTI, GTS, GTR Intake Grate

WR243

$255.00

SEADOO INTAKE GRATE GTR/GTS/GTI 11+

Redesigned for maximum hook up in Rough water conditions
Helps eliminate loose rear end handling
Increase in acceleration and straight line stability
Reduced cavitation on take off
Race proven design

Instructions

Fitment

Sea-Doo

2011-2019 Seadoo GTI, GTS, GTR Intake Grate

Seadoo Performance 4-TEC Intercooler

WR04040

$450.00

WORX Racing NEW Performance Sea-Doo 4-tec Intercooler provides huge gains over OEM Intercooler providing a cooler denser air to the engine increasing horsepower! The 30% larger wider core allows for better heat transfer of compressed air from supercharger or turbo charger before entering engine. WORX Racing NEW Sea-Doo intercooler is a direct replacement of all Sea-Doo 4-tec external intercoolers and is suitable for all applications from stock to open turbo watercraft. Unit comes with necessary water fittings to suit OEM cooling applications, pressure bleed on front of unit and a replaceable sacrificial anode to extend intercooler life.

On certain older models, where the OEM pressure bleed is not present, some extra modification may be required to suit.

Fitment

2004-2015 Sea-Doo
2004-2015 Sea-Doo 4-TEC

Seadoo 4-TEC Thermostat

WR04037

$80.00

-160 Deg (ºF) thermostat a direct drop in replacement for OEM unit in Sea-Doo 4-tec models

- Lowers engine temps up to 30 degs (ºF)

- A must for any modified Sea-Doo engine that retains OEM cooling system operating under high load or in Hotter climates

Fitment

2005-2020 Sea-Doo
2005-2020 Sea-Doo 4-TEC

Seadoo ECU Reflash Service

WR03006

$550.00

Whether you've just hopped on your Seadoo for the first time or been riding it for years and want to upgrade, a Worx Tune is always a great idea!

As one of the easiest upgrades to make, the upgrade process is super straightforward! All you have to do is remove your ECU, send/drop it in to us. We'll upgrade the ECU and send it back the same or next day we receive it!

As standard, for Seadoo skis we usually recommend a 8400 RPM limit tune!

We are also able to convert your 90HP GTI to a 110HP.

If you'd like a different tune, make sure you write this down on your ECU reflash form when sending us your ECU.

Worx Racing Components highly recommends upgrading your impeller to a lower pitch to truly get the best out of your ski. A lower pitch prop will achieve a higher RPM and get you closer to that sweet spot for an overall increase in performance.

Worx has a wide range of ECU tunes available that have been tried and tested over countless skis. If you're unsure about whether a tunes right for your ski or want to make sure there's a tune available, don't hesitate to contact us at: info@worx.com.au

Benefits:

Remove Boost Limit
Advanced Ignition timing for increase in low and mid range acceleration
New fuel and ignition table for top RPM range
No engine internal modifications required

CAUTION: These tunes are suited for 98 Octane fuel only.

While Worx Racing Components make their best effort to ensure our tune library is up to date, unfortunately due to shifts between models, even within the same year, some skis may differ slightly. In this case Worx will get back to you in a timely manner in the event that the Reflash may take longer than expected or not be able to be completed.

PLEASE NOTE: This is a ECU reflash service performed on your stock ECU
Once you place your order please print the below ECU form and send the completed for with your ECU. WORX aim to perform this service the same or next business day the ECU is received and will return your ECU to you via a fully trackable overnight service.

Please Print & complete the following form. We receive multiple ECU's each day. Completing the below form ensures quick and accurate turn around of each ECU reflash order.

Fitment

Sea-Doo

WR01010

$25.00

Want your ski to breathe? Get one of these breather filters for your ski!

Suits Yamaha and Seadoo inlet. May Require an aftermarket Air filter or blocking of OEM outlet.

Fitment

Sea-Doo

Seadoo 1000cc Injector Kit

WR02013

$500.00

A must for any Modified/ High Horsepower application for maximum fuel delivery

Increased fuel delivery for high boost/ high RPM engines

Requires remapped ECU or Aftermarket ECU to operate

Kit comes with all required Hardware and adaptors (3 injector kits included)

Fitment

Sea-Doo

Instructions

Fitment

Instructions

Fitment

Fitment

Fitment

Fitment

Fitment

Fitment

UNLOCK 10% OFF