Easily the first choice of Modification for you ST3 Sea-Doo RXTX or GTR. During testing we found much great stability and hook up in rough conditions and an increased speed gain with reduced impeller slip (cavitation). This grate improves both the ride and the feel of the craft and compliments the SeaDoo ST3 hull extremely well.

• Redesigned for maximum hook up in Rough water conditions
• Increase in acceleration and straight line stability
• Reduced cavitation on take off
• Race proven design from stock class to open
• Suits all RXTX 18+ 300Hp ST3 HULL Models and GTX LIMITED, GTX 230, GTI 170 AND GTR 230 MODELS, ALSO SUITS 2020+ RXPX Models

Instructions

Download Instructions

Fitment

• 2018-2020, 2023 Sea-Doo
• 2018-2020, 2023 Sea-Doo RXTX, RXPX

The Yamaha GP1800 SVHO, 2015+ VXR is the ultimate fun machine and it is with great excitement Worx Racing Components bring to you their WR246 Intake Grate designed specifically for this new model. This intake grate is a must have for both recreational riders and racers wanting to get the very best from their new GP1800 or VXR.

Designed for the ultimate hook-up and handling, this intake grate combats cavitation in choppy to rough water conditions, maximises acceleration and even adds top end speed. Stability and cornering ability are also improved, this is a huge benefit when towing water skiers or other water toys. In testing, Worx owner Gary Watson discovered that this grate paired with Worx sponsons (WR552-I) completely transformed the all round handling of this boat.

Worx Racing Components are proudly Australian made.

Instructions

Fitment

• Yamaha
• Yamaha GP1800, VXR

The Yamaha FZR/FZS SVHO is the ultimate fun machine and it is with great excitement Worx Racing Components bring to you their WR245 Intake Grate designed specifically for this new model. This intake grate is a must have for both recreational riders and racers wanting to get the very best from their new FZR or FZS.

Designed for the ultimate hook-up and handling, this intake grate combats cavitation in choppy to rough water conditions, maximises acceleration and even adds top end speed. Stability and cornering ability are also improved, this is a huge benefit when towing water skiers or other water toys. In testing, Worx owner Gary Watson discovered that this grate paired with Worx sponsons (WR556-I) completely transformed the all round handling of this boat.

To maximise the performance gains achieved with this intake grate, Worx also have a polyurethane pump plug kit available (WR0706) to fill the voids in the intake grate that bleed air into the pump causing cavitation. Worx Racing Components are proudly Australian made

Instructions

Fitment

• 2014-2016 Yamaha
• 2014-2016 Yamaha FZR, FZS

Our Worx Seadoo Spark Intake grate performs better than stock by far. Better snap off the bottom, better top speed, simply better.
Partner it up with the Spark pump plug Kit and you're really moving.

This intake grate is a must have for anyone wanting to get the very best from their Seadoo Spark. This intake grate replaces the stock plastic intake grate with more rigid Aluminium that will stand the test of time and will maximise overall handling and hook up in all water conditions.

• Increased acceleration and drive
• Reduced cavitation with increased efficiency
• Increase stability through cornering and rough water
• IJSBA legal in all classes
• Suits both 2/3 up models

Instructions

Fitment

• 2014-2020 Sea-Doo
• 2014-2020 Sea-Doo Spark

SEADOO INTAKE GRATE GTR/GTS/GTI 11+

• Redesigned for maximum hook up in Rough water conditions
• Helps eliminate loose rear end handling
• Increase in acceleration and straight line stability
• Reduced cavitation on take off
• Race proven design

Instructions

Fitment

• Sea-Doo

Our Rickter Grate was the world's first intake grate designed specifically for the popular Rickter Hull. Designed in conjunction with some of the worlds finest freestyle riders this grate will fit the entire Rickter Hull range including the Rickter Edge and also various other aftermarket hulls - such as the MX1 and 2014 Krash Predator.

Our WR242 Rickter Grate is now first choice for the worlds finest Freeride and Freestyle riders, including WORX Team Rider Mark Gomez 'I run the WORX 242 intake grate on my 2014 Rickter FR2 Evo-1 because it provides the superior hook up by being matched to the custom wide taper of the Evo-1 pump duct. The dual bar channel to the massive scoop provides the grate with a lot of strength then the single bar channelling down the centre of the grate goes in line with the drive shaft providing no unnecessary cavitation in the massive intake channel. That being said I still find this intake grate to allow my Rickter to break loose when I need it to, always keep the pump loaded while on edges in turns, and most of all stay absolutely hooked up and driving through rough surf conditions. I also perform flat water freestyle on my Evo-1, so I rely heavily on the WORX 242's ability to deliver the most amount of hookup for those flatwater tricks. For any Rickter Freestyle and Freeride application my choice of intake grate to do it all the best is the WORX 242 intake grate!'

Instructions

Download Instructions

Suits Yamaha VXR/VXS models from 2011- 2014

Product Benefits include:

* Significantly reduced cavitation

* Increased acceleration

* Increased top end speed

We have also developed a pump seal kit to compliment this grate. Location specific, these polyurethane inserts fill the voids in the OEM pump inlet shoe that bleed air into the pump causing cavitation

Fitment

• Yamaha
• Yamaha VXR, VXS

Benefits include:
- Reduced Cavitation
- Enhanced Hook Up
- Superior Handling

Instructions

Fitment

• Yamaha

Easily the first choice of Modification for your T3 Sea-Doo RXPX. This intake grate is years ahead of its rivals. During testing we found a 2mph speed gain with reduced impeller slip (cavitation). This grate improves both the ride and the feel of the craft and compliments the Seadoo T3 hull extremely well.

• Redesigned for maximum hook up in Rough water conditions
• Increase in acceleration and straight line stability
• Reduced cavitation on take off
• Race proven design from stock class to open
• Used By Multiple World Champion James Bushell for his prestigious 158 performance model watercraft.
• Suits all RXPX 16+ 300Hp Models and 2012+ RXPX 260Hp Models (T3 Hull)

Instructions

Fitment

• 2012-2020 Sea-Doo
• 2012-2020 Sea-Doo RXPX

Specifically designed for the 2012 Yamaha FX SHO hull.

Benefits include:

- Closed Course and Offshore Race tested and proven Used by Chris MacClugage in 2016 P1 Aqua X skis built by the factory Yamaha Deans team!!!

- Superior hook up

- Better bow lift for top speed 

- Smoother turning

- Utilize WORX Pump Plug kit WR0703

Instructions

Fitment

• 2012-2020 Yamaha
• 2012-2020 Yamaha FX HO, FX SHO, FX SVHO

- Greater control and turning stability
- Enhanced hook up/ reduces cavitation
- Improved handling/drive in rough water conditions

Instructions

Fitment

• 2011-2020 Kawasaki
• 2011-2020 Kawasaki Ultra 300

Benefits include:
- Greater control and turning capability
- Enhanced hook up
- Improved handling in choppy conditions

Instructions

Click Here To Download WR234 Instructions

Take Control of the Water

Upgrade your ride with precision handling and unbeatable performance. This intake grate delivers serious gains where it counts:

? Sharper turning and tighter control – dominate every corner with greater stability

? Maximum hook-up – keep your ski glued to the water, even under throttle

? Confidence in the chop – improved handling in rough water conditions

? Faster take-off – boost acceleration and reduce cavitation

? Plug-and-play ready – fully compatible with the WR0701 Pump Plug Kit

Fits: 2009, 2010, 2011, 2012, 2013 Yamaha FZR / FZS models

A must-have for riders chasing next-level performance.

Instructions

Download Instructions

Fitment

• 2009-2013 Yamaha
• 2009-2013 Yamaha FZR, FZS

Benefits include:

- Greater control and turning capability

- Enhanced hook up

- Improved handling in choppy conditions

Instructions

Fitment

• 2008-2016 Yamaha
• 2008-2016 Yamaha FX SHO

Benefits include:
- Greater control and turning capability
- Enhanced hook up
- Improved handling in choppy conditions

Instructions

Fitment

• 2008-2011 Sea-Doo

- Specifically designed of the 2008+ Superjet Hull
- Deeper scoop for improved hook up and turning
- Great in rough water and for surf riding
- Wide and deep pick up area which not only loads the pump but allows you to ride hard up to a turn buoy and then when you come off the throttle the grate acts like a brake to slow you into the turn

For a less aggressive alternative try our WR205. Fits all year model Superjets.

Instructions

Fitment

• Yamaha
• Yamaha Superjet

These boats hook up pretty good in the calm but really benefit from our intake grate in choppy to rough water, the Worx grate will not cost you any top speed in the calm and will give you heaps better hook up and drive in rough water and around the track for closed course racing. Our unique design ensures the back of the boat does not slide out and that the pump stays fully loaded to combat cavitation. The pick up point at the rear of the intake grate has also been shifted forward to improve rough water hook up. 

Instructions

Fitment

• 2007-2020 Kawasaki

These boats hook up pretty well in the calm but really benefit from our intake grate in choppy to rough water, the Worx intake grate will not cost you any top speed in the calm but will give you heaps better hook up and drive in the rough and around the track for closed course racing. This grate has two bars running the full length of the boat that hang down and stop the back of the boat from sliding out, the centre blade of the grate does most of the work in the straights and the side wings come into play in the corners to keep the pump fully loaded and reduce cavitation.

Instructions

Fitment

• 2006-2010 Sea-Doo

This intake grate is a must for any one wanting to get the best from their SX-R. With the OEM grate the boat looses hook-up in anything but flat calm water.
If you want the ultimate in hook-up and handling without sacrificing major speed loss then this is the intake grate for you.
The WR225 has twin central pickup vanes as well as the proven Worx side wing which is positioned midway between the central vanes. this grate also has a wider and deeper pickup area at the back, the combined effect is more efficient pump loading in all water conditions and better hook up and drive out of the turns. This new generation intake grate together with the totally new shape WR311 ride plate is an awesome addition and will benefit all riders from beginner to pro.

Instructions

Fitment

• 2006-2011 Kawasaki

The Worx WR224 Intake Grate fixes the cavitation by loading the pump more efficiently giving even better hook up and drive and will not cost you top speed in flat calm conditions.
The grate has two bars at the front and a single bar at the rear supporting a foil that picks up water in even the roughest conditions to fully load the pump for better drive and handling.

Instructions

Fitment

• 2004-2020 Yamaha
• 2004-2020 Yamaha FX HO

The RXP is the ultimate fun machine! Supercharged, intercooler, 215 HP it is a blast to ride!
These boats hook up pretty good in the calm but really benefit from our intake grate in choppy to rough water. The Worx grate will not cost you any top speed in the calm but will give you heaps better hook up and drive in the rough and around the track for closed course racing. This grate has two bars running the full length of the boat that hang down and stop the back of the boat from sliding out, the centre blade of the grate does most of the work in the straights and the side wings come into play in the corners to keep the pump fully loaded and driving.
Pair with our WR540 Sponsons for winning results!

Instructions

Fitment

• 2004-2008 Sea-Doo

The OEM grate is fine in flat calm water conditions but is not so good in choppy or rough water, the boat cavitates and looses a lot of drive which causes a drop off in top speed of several MPH.
Performance Benefits:
- No top speed loss
- Better hook up in all water conditions
- Better cornering because the Worx grate has two rails running the full length that hang down 12mm below the pump cavity which stop the boat sliding out

Instructions

Fitment

• 2002-2007 Sea-Doo

The largest of the Kawasaki range, the STX introduced in 2000 as a two stroke and then in later models fitted with the 12F and 15F four stroke engines these boats really benefit from an efficient intake grate to properly load the pump and get the best from your Kawi.
Performance benefits include:
- Better hook up in all conditions
- No top speed loss
- Better pump loading in rough water
- Holds the boat on the water giving better control
- Better cornering because the Worx grate has two rails running the full length that hang down 12mm below the pump cavity which stop the boat sliding out

Instructions

Fitment

• 1997-2020 Kawasaki

Not having a WORX intake grate on a Yamaha GP, is like having a high performance sportscar on a wet road with bald tyres, it is just not possible to get the best from these boats.
Performance benefits of our WR218 include:
- Better hook up in all conditions
- No top speed loss
- Better pump loading in rough water
- Holds the boat on the water better giving better control
- Better cornering because the Worx grate has two rails running the full length that hang down 12mm below the pump cavity which stops the ski sliding out

 Fits GP800R, GP1200R, GP1300R

Instructions

Fitment

• 2000-2008 Yamaha

In testing we loved the speed of the RX but discovered that they do not hook up well in anything but perfect conditions. Our Worx Intake Grate will maximise hook up and stability without causing speed loss in calm conditions. Pair with our WR519 sponsons to totally transform the handling of your boat.

Instructions

Fitment

• 2000-2004 Sea-Doo

These Kawasakis are super fast. However, in standard form they don't hook up and are downright scary to ride at full speed. They are very unpredictable and tend to track on waves of boat wake.
Problem solved! The Worx grate helps with hook up and overcomes the stability issue without causing any speed loss in calm water conditions. Add a set of Worx WR519 to completely transform the handling of your boat.

Instructions

Click Here To Download WR215 Instructions

Instructions

Fitment

• 1999-2005 Kawasaki

The Worx WR212 will give you great hook up in all water conditions with no cavitation off the mark no matter how hard you accelerate, and in the rough water you will gain drive and control.

Instructions

Fitment

• 1993-2003 Sea-Doo

This grate is a must to get the best from your boat! Designed to give your pump excellent loading in all water conditions, it will not cost you speed in the calm and will make a night and day difference in choppy to rough conditions.

Instructions

Fitment

• 1991-2002 Sea-Doo

This intake grate combats the boats tendency to porpoise when you are riding two up, holding the boat a lot flatter on the water and will improve handling and hook up. Combine with Worx Sponsons WR513 for ultimate handling and performance.

Instructions

Fitment

• 1995-2006 Kawasaki

This intake grate will improve the all round handling and performance of your boat in all water conditions without costing you any top end speed. Providing the ultimate hook up and increased top end speed, our WR208 is equally at home on a family weekender as it is on a full house competition race boat.

Instructions

Fitment

• 1996-2005 Sea-Doo

This was the first of our new generation intake grates that changed the old compromise theory that a good rough water intake grate would always cost you top end speed. Worx changed all of that by producing an intake grate that not only gave the best hook up in all conditions but also increased top speed. Independent tests rated this Worx grate as best in the world with two speed gains of two to three mph.
This intake grate boosts the performance of this boat in all water conditions with top speed gains even in flat calm water conditions. With a revolutionary design, it has an aircraft wing style shape in the centre of the two bars which enhances performance in the straights and similar shaped wings on the outside that come into play when you lean the boat in the turns.

Instructions

Fitment

• 1989-1998 Sea-Doo

This intake grate fits a number of the Seadoo models from the single rider HX as well as several of the three seater boats through to the 97 GTI.
It will improve hook up and cornering ability allowing you to ride the boat hard into tight turns and keep your pump fully loaded.

Instructions

Fitment

• 1992-1997 Sea-Doo

This is a similar grate to the WR201 however it is less aggressive and gives 1-2 MPH higher top speed but does not have the same braking effect as the WR201. If you want top speed and usually ride in calmer/smoother water this is the one for you. Perfectly matched to enable easy installation.

For the ultimate Freeride Combination, pair this grate with our WR314 Rideplate.

For 2008+ Superjet Owners this is a great option for those wanting a less agressive grate than our WR228

Instructions

Fitment

• Yamaha
• Yamaha Superjet

Benefits of this intake grate include:
- Reduced porpoising
- Minimal to zero top speed loss (up to 3mph gain in choppy conditions!)
- Greater control & turning capability

Instructions

Fitment

• 1976-1995 Kawasaki

This was amongst the first models of larger stand-up Jet Ski's produced by Kawasaki who dominated racing for a number of years. Although larger than the previous 300, 440 and 550 models a similar hull design was used with the same result: poor hook-up in most conditions without an after market intake grate. Designed initially when all of the pro riders were riding this model Kawasaki, this intake grate will transform your boats performance in all water conditions, with increased pump loading and allowing you to keep full power even on those really tight turns.

Instructions

Fitment

• 1995-1997 Kawasaki

This was the first of the larger stand-up Jet Ski produced by Kawasaki and dominated racing for a number of years. Although larger than the previous 300, 440 and 550 models a similar hull design was used with the same result: poor hook-up in most conditions without an after market intake grate. This intake grate was designed when all of the pro riders were riding this model Kawasaki, it will transform your boats performance in all water conditions, with increased pump loading and allowing you to keep full power even on those really tight turns

Instructions

Fitment

• 1992-1997 Kawasaki

These model skis have a very flat intake area that lose hook up in anything but perfect conditions. To get any sort of performance from these two boats an intake grate is absolutely essential.

The major performance benefit of our WR202 is improved hook up in all water conditions. It will transform your boat in choppy and rough conditions by reducing cavitation and keeping the pump fully loaded.

Instructions

Fitment

• 1986-1995 Kawasaki

Fits 1991-2014 Superjets. Also fits Waveblaster 1 & 2. Designed with a deeper scoop for more aggressive hook up. Ideal for Freestyle, Freeride and Racing.
This is one of the first intake grates ever produced by Worx. It is used by many of the top racers and recreational riders world wide and is the most popular Superjet/Blaster Intake grate on the market. These boats cavitate easily and lose drive because of the relatively flat intake area, the WR201 will solve these issues and will take the handling capability of your boat to new levels. It is a great rough water and surf riding intake grate because the pick-up area is wide and deep. It not only loads the pump but it also allows you to ride hard up to a turn buoy and then when you come off the throttle, the grate acts like a brake to slow you into the turn. For dramatically improved hook up and turning look no further than Worx WR201.??

Instructions

Fitment

• 1990-2020 Yamaha
• 1990-2020 Yamaha Superjet

Sick of your stock plastic pump shoe bending, cracking, or breaking when you really put the pedal to the metal? Yeah, we get it. That's why we designed the Worx Racing cast aluminium pump shoe, the last pump shoe upgrade you'll need for your stand-up.

This thing can take the heat, the load, and the big hits from your freestyle engine. Our pump shoe is pre-drilled and tapped but as it is a cast part, some minor modifications may be needed.

Whether you’re pushing it to the limit or simply craving reliability, this pump shoe works with large winged aftermarket intake grates for max efficiency and zero sacrifice in performance. Fits all Yamaha Superjets and most aftermarket hulls.

? Tough as Nails – Cast aluminium construction built for high speeds and heavy-duty use.
? Max Efficiency – Works with aftermarket intake grates for ultimate jet pump performance.
? Built to Last – Say goodbye to plastic and hello to reliable, long-lasting strength.

Fitment

• 1990-2020 Yamaha
• 1990-2020 Yamaha Superjet, SHO

This intake grate is a must for any one wanting to get the best from their SX-R. With the OEM grate the boat looses hook-up in anything but flat calm water.

If you want the ultimate in hook-up and handling this is the intake grate for you.
Designed specifically for choppy environments, this intake grate sacrifices a small amount of speed in favour of superior handling.

The WR248 has twin forward pickup vanes as well as the proven Worx side wing which is positioned midway between the central vanes. This grate also has a  This new generation intake grate is an awesome addition and will benefit all riders from beginner to pro.

Instructions

Fitment

• 2017-2021 Kawasaki