Bored of the way your ski currently handles? Want to corner tighter and faster? Make your jet ski feel like it's turning on rails with Worx Racing Component's WR547-I Sponsons.

Made for Kawasaki Ultra 300/310 models, these sponsons have been specifically designed to improve the handling performance of your Kawasaki ski. 

Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions.

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Paddles
• All Fasteners Needed

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Instructions

Fitment

• 2011-2020 Kawasaki
• 2011-2020 Kawasaki Ultra 300

Want to revive your old ski? Looking for a way to reignite your passion for the water? Look no further than Worx WR528 Sponsons!

Made for Kawasaki SX-R 800 Sponsons models, these sponsons have been specifically designed to improve the handling performance of your Kawasaki ski. 

Designed to work perfectly paired with the WR310 or WR311 ride plates and WR222 or WR225 intake grates!

Theses sponsons fit under the gunnel beading on the bond line of the boat where the hull and deck are joined together and come into play when the boat is leaned over into the corners. The sponsons hold the ski on line in even the hardest turns and make getting those really tight corners look easy.

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Paddles
• All Fasteners Needed

Instructions

Fitment

• 2003-2011 Kawasaki

Want to revive your old ski? Looking for a way to reignite your passion for the water? Look no further than Worx WR527-I Sponsons!

Made for Kawasaki STX12F and 15F Sponsons models, these sponsons have been specifically designed to improve the handling performance of your Kawasaki ski. 

Designed for full adjustability, these sponsons put your ride, completely in your hands! Not only is the paddle height adjustable but the forward and backward positioning options means that, for maximum top speed in calm water you can position your blades in the fully forward position or for maximum handling and hook up the fully back position is best!

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Paddles
• All Fasteners Needed

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Instructions

Fitment

• 1997-2010 Kawasaki

This ride plate features a wider section at the back with two concaves as well as the famous Worx ‘D’ cut-out which allows you to push the boat hard into turns and provides greater stability and less tendency to slide out

The wider tail section and the double concaves together with the 'D' cut make this plate far superior to anything we tested it against, the extra width is like an extension off boat length in the rough and lets you slam the boat into the hardest turns with confidence that you will be fully in control. The double concaves in the rear section also give you the extra bight needed to rail through the tightest turns.

Instructions

Fitment

• Kawasaki

This WR 310 is a totally new design for the SXR developed for WORX back in 2004 by team rider Jordan Fielder and his US tuner Ronnie Saner. This ride plate was used by Jordan to take out number 1 in Pro Mod class at World Finals that year.

Instructions

Fitment

• 2006-2011 Kawasaki

This ride plate is a direct bolt on replacement for all recreational or competition SXI's allowing most riders to ride faster while expending less energy.

- Extra length holds the boat a lot flatter
- Hard chine lines on the edges of the plate make it a lot easier to carve those really tight turns in complete control
- Incorporates our famous 'D' cut which picks up water when you push the boat in hard turns and gives it a lot more stability and less tendency to slide out. The bevelled edge on the 'D' cut-out help to hold the boat flatter and gives you a lot better drive and control.

Instructions

Fitment

• 1987-1997, 1999-2002 Kawasaki

Description

This ride plate is a direct bolt on replacement for all recreational or competition SXI Pro's and SXR 800's allowing most riders to ride faster while expending less energy.

The plate is considerably longer then the OEM plate with our trademark 'D' cut in it, the extra length of the plate holds the boat flatter and stops porposing, the 'D' cut makes a big difference to the handling in several ways:
1. It helps to hold the boat flatter in rough water and under initial acceleration, as the bow lifts, the 'D' cut out bites into the water pulling the boat back down which let's the pump get better hook-up and drive
2. When you are cornering hard the 'D' cut out keeps the boat more stable by allowing water to travel over the top of the plate through the cut-out

Instructions

Fitment

• 2000-2002, 2006-2011 Kawasaki

• This ride plate is a direct bolt on replacement
• The plate is considerably longer then the OEM plate with our trademark 'D' cut in it, the extra length of the plate holds the boat flatter and stops porposing, the 'D' cut makes a big difference to the handling and allows the boat to stay flatter in rough water and promotes better hook up and drive

Instructions

Fitment

• 1992-1997 Kawasaki

- Greater control and turning stability
- Enhanced hook up/ reduces cavitation
- Improved handling/drive in rough water conditions

Instructions

Fitment

• 2011-2020 Kawasaki
• 2011-2020 Kawasaki Ultra 300

These boats hook up pretty good in the calm but really benefit from our intake grate in choppy to rough water, the Worx grate will not cost you any top speed in the calm and will give you heaps better hook up and drive in rough water and around the track for closed course racing. Our unique design ensures the back of the boat does not slide out and that the pump stays fully loaded to combat cavitation. The pick up point at the rear of the intake grate has also been shifted forward to improve rough water hook up. 

Instructions

Fitment

• 2007-2020 Kawasaki

This intake grate is a must for any one wanting to get the best from their SX-R. With the OEM grate the boat looses hook-up in anything but flat calm water.
If you want the ultimate in hook-up and handling without sacrificing major speed loss then this is the intake grate for you.
The WR225 has twin central pickup vanes as well as the proven Worx side wing which is positioned midway between the central vanes. this grate also has a wider and deeper pickup area at the back, the combined effect is more efficient pump loading in all water conditions and better hook up and drive out of the turns. This new generation intake grate together with the totally new shape WR311 ride plate is an awesome addition and will benefit all riders from beginner to pro.

Instructions

Fitment

• 2006-2011 Kawasaki

The largest of the Kawasaki range, the STX introduced in 2000 as a two stroke and then in later models fitted with the 12F and 15F four stroke engines these boats really benefit from an efficient intake grate to properly load the pump and get the best from your Kawi.
Performance benefits include:
- Better hook up in all conditions
- No top speed loss
- Better pump loading in rough water
- Holds the boat on the water giving better control
- Better cornering because the Worx grate has two rails running the full length that hang down 12mm below the pump cavity which stop the boat sliding out

Instructions

Fitment

• 1997-2020 Kawasaki

These Kawasakis are super fast. However, in standard form they don't hook up and are downright scary to ride at full speed. They are very unpredictable and tend to track on waves of boat wake.
Problem solved! The Worx grate helps with hook up and overcomes the stability issue without causing any speed loss in calm water conditions. Add a set of Worx WR519 to completely transform the handling of your boat.

Instructions

Click Here To Download WR215 Instructions

Instructions

Fitment

• 1999-2005 Kawasaki

This intake grate combats the boats tendency to porpoise when you are riding two up, holding the boat a lot flatter on the water and will improve handling and hook up. Combine with Worx Sponsons WR513 for ultimate handling and performance.

Instructions

Fitment

• 1995-2006 Kawasaki

Benefits of this intake grate include:
- Reduced porpoising
- Minimal to zero top speed loss (up to 3mph gain in choppy conditions!)
- Greater control & turning capability

Instructions

Fitment

• 1976-1995 Kawasaki

This was amongst the first models of larger stand-up Jet Ski's produced by Kawasaki who dominated racing for a number of years. Although larger than the previous 300, 440 and 550 models a similar hull design was used with the same result: poor hook-up in most conditions without an after market intake grate. Designed initially when all of the pro riders were riding this model Kawasaki, this intake grate will transform your boats performance in all water conditions, with increased pump loading and allowing you to keep full power even on those really tight turns.

Instructions

Fitment

• 1995-1997 Kawasaki

This was the first of the larger stand-up Jet Ski produced by Kawasaki and dominated racing for a number of years. Although larger than the previous 300, 440 and 550 models a similar hull design was used with the same result: poor hook-up in most conditions without an after market intake grate. This intake grate was designed when all of the pro riders were riding this model Kawasaki, it will transform your boats performance in all water conditions, with increased pump loading and allowing you to keep full power even on those really tight turns

Instructions

Fitment

• 1992-1997 Kawasaki

These model skis have a very flat intake area that lose hook up in anything but perfect conditions. To get any sort of performance from these two boats an intake grate is absolutely essential.

The major performance benefit of our WR202 is improved hook up in all water conditions. It will transform your boat in choppy and rough conditions by reducing cavitation and keeping the pump fully loaded.

Instructions

Fitment

• 1986-1995 Kawasaki

Billet anodised construction

Fits 7/8 handle bars

Suits All style 4-tec DESS Posts

Fitment

• Sea-Doo

• 2 DEG Billet anodised pump wedge
• Promotes bow lift to increase top speed from 1 to 2 mph
• Higher nose ride height allows for dryer ride
• Cost effective upgrade for better handling and top speed
• Fast and easy install

Fitment

• 2011-2020 Kawasaki
• 2011-2020 Kawasaki Ultra 300

PLEASE NOTE: This is a ECU reflash service performed on your stock ECU
Once you place your order please wait for an email from our Customer Service Team with details on where to ship your ECU and a form to be sent with it. WORX aim to perform this service the same or next business day the ECU is received and will return your ECU to you via a fully trackable overnight service.   

Please Print & complete the following form. We receive multiple ECU's each day. Completing the below form ensures quick and accurate turn around of each ECU reflash order.

Fitment

• 2001, 2012-2013 Kawasaki

Want that extra level of protection? 

Worx Racing Pre-Filter wraps are designed to give you that extra peace of mind when it comes to your Air Filter. Designed to keep your Air Filter dry through extreme rides, while still ensuring maximum air flow to your ski.

Made from a durable, water repellent polyester material, these pre-filters guarantee extra life for your air filter and ski and provide a universal fit for 6" pod filters.

Comfortably fits all Worx Aftermarket Air filters excluding sparks.
For Seadoo Sparks, use WR-PF-4

Fitment

• Sea-Doo

Want that extra level of protection? 

Worx Racing Pre-Filter wraps are designed to give you that extra peace of mind when it comes to your Air Filter. Designed to keep your Air Filter dry through extreme rides, while still ensuring maximum air flow to your ski.

Perfectly fits our Seadoo Spark Air Filter Upgrade! 

Made from a durable, water repellent polyester material, these pre-filters guarantee extra life for your air filter and ski and provide a perfect fit for your Worx Seadoo Spark Air Filter!

Fitment

• Sea-Doo
• Sea-Doo Spark

The Solas 12-Vane Stainless Steel Pump is a direct bolt-on performance upgrade. The one-piece investment cast stainless steel pump offers improved bottom-end acceleration, improved hook-up, and up to 2 mph top speed gain over OEM pump. Kit comes complete with bearings, seals, shaft, pump cone, reduction nozzle and steering nozzle.

For use in craft equipped with a 148mm diameter wear ring.

Fitment

• Kawasaki

Enhance the performance of your Kawasaki watercraft with the Solas KR-CD-14/21 Kawasaki Impeller. Engineered to deliver exceptional acceleration, top speed, and handling, this high-performance impeller is the perfect upgrade for Kawasaki enthusiasts looking to elevate their riding experience and achieve maximum performance.

Key Features:

• Advanced Blade Design: The 14/21 pitch and innovative blade geometry ensure superior acceleration and increased top-end speed, optimizing your Kawasaki’s performance on the water.
• High-Quality Construction: Crafted from durable, corrosion-resistant materials, this impeller is built to withstand the harshest marine environments and provide long-lasting reliability.
• Precision Engineering: Ensures a perfect fit, reducing cavitation and enhancing overall ride quality while improving fuel efficiency.
• Optimized for Kawasaki Models: Specifically designed to fit a wide range of Kawasaki watercraft, ensuring seamless compatibility and enhanced performance.
• Easy Installation: User-friendly design allows for straightforward installation, making it accessible for both professional mechanics and DIY enthusiasts.

Benefits:

• Enhanced Performance: Experience a significant boost in acceleration and top speed, ideal for high-speed recreational riding and competitive racing.
• Improved Handling: The advanced blade design enhances handling and maneuverability, providing a smoother and more controlled ride.
• Increased Efficiency: The optimized design ensures efficient power delivery, reducing fuel consumption and extending engine life.
• Durable and Reliable: High-quality materials and precision construction ensure that this impeller will withstand the rigors of frequent use in various water conditions.

For installation you will require Solas Spline Tool WR001.

Suits Following Models:

2014+ ULTRA 310X/310X SE/310LX/310R

2011 - 2013 ULTRA 300X / 300LX

Fitment

• 2011-2015 Kawasaki

Fitment

• Kawasaki

The ODI/Troy Lee Designs Signature Series grips are designed for optimal control in wet conditions. Grooved Channels prevent water buildup while overmolded flaps give added protection on outside clamp.

PRODUCT FEATURES:

• 130mm Length
• 7/8" (22mm) Inner Diameter
• Unique Undercut pads give slim comfortable feel with the ultimate amount of grip
• Custom flanged design provides hand support with more usable grip surface
• Etched Inside clamp provides clocking system to assist on installation
• Includes new Snap Cap End Plugs

Fitment

• Sea-Doo

Ruffian Watercraft grips are designed for optimal control in wet conditions. The grip's narrow diamonized surface pattern provides an excellent gripping system and the Lock-On design offers 100% slip-free performance. Guaranteed.

PRODUCT FEATURES:

• 130mm Length
• 7/8" (22mm) Inner Diameter
• Large Raised Pads and Deep Grooves
• Knurled Surface Pattern for Better Traction
• No Flange
• 100% Slip-Free Performance
• Includes new Snap Cap End Plugs

Fitment

• Sea-Doo

Ruffian Watercraft grips are designed for optimal control in wet conditions. The grip's narrow diamonized surface pattern provides an excellent gripping system and the Lock-On design offers 100% slip-free performance. Guaranteed.

PRODUCT FEATURES:

• 130mm Length
• 7/8" (22mm) Inner Diameter
• Large Raised Pads and Deep Grooves
• Knurled Surface Pattern for Better Traction
• No Flange
• 100% Slip-Free Performance
• Includes new Snap Cap End Plugs

Fitment

• Sea-Doo

Rogue Watercraft grips are designed for optimal control in wet conditions. The grip's narrow diamonized surface pattern provides an excellent gripping system and the Lock-On design offers 100% slip-free performance. Guaranteed.

PRODUCT FEATURES:

• 130mm Length
• 7/8" (22mm) Inner Diameter
• Large Raised Pads and Deep Grooves
• Knurled Surface Pattern for Better Traction
• No Flange
• 100% Slip-Free Performance
• Includes new Snap Cap End Plugs

Fitment

• Sea-Doo

Bored of the way your ski currently handles? Want to corner tighter and faster? Make your jet ski feel like it's turning on rails with Worx Racing Component's WR508 Sponsons.

Made for Kawasaki ZXI 900/1100 models, these sponsons have been specifically designed to improve the handling performance of your Kawasaki ski. 

Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions.

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Paddles
• All Fasteners Needed

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Fitment

• 1995-2003 Kawasaki

Fitment

• 1997-2006 Kawasaki

This intake grate is a must for any one wanting to get the best from their SX-R. With the OEM grate the boat looses hook-up in anything but flat calm water.

If you want the ultimate in hook-up and handling this is the intake grate for you.
Designed specifically for choppy environments, this intake grate sacrifices a small amount of speed in favour of superior handling.

The WR248 has twin forward pickup vanes as well as the proven Worx side wing which is positioned midway between the central vanes. This grate also has a  This new generation intake grate is an awesome addition and will benefit all riders from beginner to pro.

Instructions

Fitment

• 2017-2021 Kawasaki

The OEM sponsons are a joke! They look adjustable but aren't and are fixed at the rear of the rail which gives the best top speed in only flat calm water, even in a light chop the boat bounces all over the place. It is hard to control and loses drive because the pump is out of the water more than it is.

But don't worry, WORX have saved the day!
The WORX Sponsons are truly adjustable only the full length of the backing rail as well as two different heights. The hull is the most reactive to sponson position that we have ever tested, for maximum top speed in calm water the sponson blades are best fitted in the fully forward position but even in the slightest chop the boat bounces all over the place. For maximum handling and hook-up on the race course, the fully back position is best but you sacrifice 1-3MPH (depending on the weight of the rider) because the boat rides a lot flatter. The ideal position is somewhere in between fully back and fully forward but is dependent on the rider weight, riding style and the type of riding that they are doing.

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Fitment

• 2001-2005 Kawasaki

This intake grate is a must for any one wanting to get the best from their SX-R. With the OEM grate the boat looses hook-up in anything but flat calm water.
If you want the ultimate in hook-up and handling without sacrificing major speed loss then this is the intake grate for you.
The WR225 has twin central pickup vanes as well as the proven Worx side wing which is positioned midway between the central vanes. this grate also has a wider and deeper pickup area at the back, the combined effect is more efficient pump loading in all water conditions and better hook up and drive out of the turns. This new generation intake grate together with the totally new shape WR311 ride plate is an awesome addition and will benefit all riders from beginner to pro.

Fitment

• Kawasaki