Worx's brand new Seadoo Trim Tabs, are a huge improvement on stock. With an improved angle, these tabs promote the front of the ski to lift up, resulting in increased performance. Compared to the plastic OEM tabs, these machined aluminium tabs hold a straight edge for consistent performance, where the stock ones have a tendency to come bowed or bow over time.  The anodised surface means these have a long life even in salt water condition. 

• Improves performance and nose lift
• Durable Billet Construction
• 1 Hour Installation

Want to upgrade your RXPX to better suit your riding style? The Worx Seadoo's Steering systems are perfect for any rider that wants to up their setup! Whether you've got a fresh new set of bars you want to put on, or you want to get the whole setup, Worx has got you covered!

• All setups retain OEM functions

• Improved ergonomics provide a more comfortable ride with less wrist strain

• Adjustable throttle/reverse housing and handlebar position

• Stems constructed from superior grade anodised billet aluminium for increased strength and durability over the failure-prone plastic OEM unit

• Allows for high quality aftermarket 7/8" (22mm) handlebar installation

Want to fall back in love with your ski? Looking for a way to reignite your passion for the water? Look no further than Worx WR545-I Sponsons!

Made for Seadoo S3 models, these sponsons have been specifically designed to improve the handling performance of your Seadoo jetski. 

Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions. 

With the adjustability of four positions, you can tailor the positioning to your riding style! 

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Adjustable Paddles
• All Fasteners Needed

Suits S3 Hull with one piece sponsons 2009-2015.

Want to revive your old ski? Looking for a way to reignite your passion for the water? Look no further than Worx WR540-I Sponsons!

Made for Seadoo RXP/RXT/GTX/GTI models, these sponsons have been specifically designed to improve the handling performance of your Seadoo jetski. 

Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions. 

With the adjustability of four positions, you can tailor the positioning to your riding style!

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Adjustable Paddles
• All Fasteners Needed

Want to revive your old ski? Looking for a way to reignite your passion for the water? Look no further than Worx WR521 Sponsons!

Made for Seadoo RX/RDI models, these sponsons have been specifically designed to improve the handling performance of your Seadoo jetski. 

In testing we discovered that this ski lacked directional stability at speed in choppy water conditions and has a bad tendency to over steer. Turning sharply, the OEM sponsons bite and spin the boat into a hard turn that you can't pull out of. Worx sponsons put you back in control and make the RX/RDI skis a pleasure to ride.

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Paddles
• All Fasteners Needed

The Better Way To Experience A Seadoo!

Looking to make your new Seadoo look a little less like your Grandma's ski?

It's time to upgrade to the brand new Worx Steering Kit for the 2020+ GTR & RXTX. This kit greatly improves riding ergonomics, with less strain on your wrists, meaning a much more comfortable ride. 

Constructed from Bulletproof Anodised Billet Aluminium, the steering stem provides much greater strength and durability when compared to the OEM plastic unit which is prone to failure in high stress environments. 

This kit includes everything you need to completely overhaul your steering!

Includes:

• ODI Grips
• ODI Handlebars
• Left Switch Housing
• Right Switch Housing
• Electronic Throttle Lever
• Reverse Lever
• Spiral Wrap
• 6 x Zip Ties

Instructions

Want to corner tighter and faster? Make your jet ski feel like it's turning on rails with Worx Racing Component's WR564-I Sponsons.

Made for Seadoo 2020 GTI, GTS & GTR models, these sponsons have been specifically designed to improve the handling performance of your Seadoo ski. Initial testing found the GTR and GTIs unreliable in straight line handling and had a tendency to chine walk. The new sponsons directly combat that and reduce the need for constant steering adjustments when travelling in a straight line.

With included spacers and 4 position adjustable paddles, and optional spacers, you're able to select from 8 different positions to tune in the lean-in-handling characteristics of your jetski, making your ski's handling more or less aggressive!

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Adjustable Paddles
• 2 x Spacers
• All Fasteners Needed

Designed not just for cutting edge performance but killer style! Same best selling Worx Racing paddle now with billet insert for 4 point adjustment to personalise your watercraft to your own unique riding style! 

WORX Racing components WR548-I Sponsons are not just replacement paddles but also include an ‘Angle Cut Adjustable Backing Rail’ which runs parallel with the bottom of the ski and is designed to reduce nose pressure at high speeds and will let the nose settle down when your off the throttle entering the corner.

Adjustment of height means ability to control how much roll you want your watercraft to have entering a corner to suit your riding style.

Having the paddle close to vertical allows for more paddle grip and with Height Adjustability to control initial turn in and mid corner hold.

Comes with backing rails and all necessary hardware!

DOES NOT SUIT RXTX ST3 MODELS ONLY GTX 230 and RXT 230

Instructions

• Constructed from Marine Grade 6061 Aluminum for superior strength
• Retains original throttle/steering sensors
• Designed for racing
• Fits 7/8 handlebars allowing you to select the style of bars that suits your own unique riding style
• Allows use of both styles of OTAS sensors
• Black anodized

Designed not just for cutting edge performance but killer style! Same best selling Worx Racing paddle now with billet insert for 4 point adjustment to personalize your watercraft to your own unique riding style! 

Specifically designed for the unique handling characteristics of the 2019 Yamaha FX 

Product benefits include:

- Enhanced control, stability, and predictability, the ski stays hooked and does not      throw you off
- Stops the ski from sinking in the back in tight turns like stock sponsons
- Allows for Greater corner entry speed
- Maximized top speed performance by creating less drag
- Superior straight line stability
- Easy installation to stock mounting points

IJSBA legal for all classes

Includes backing rails and all necessary hardware.

• Constructed from Marine Grade 6061 Aluminum for superior strength
• Retains original throttle/steering sensors
• Fits 7/8 handlebars allowing you to select the style of bars that suit your own unique riding style
• Designed for racing and can be used for recreational, too
• Black Anodised

GP1800 2017- 2020 | VXR/VXS 15+ | EX SERIES 17 - 2023

Cover plate and hardware included (cover plate for GP/VXR models only)

• Constructed from Marine Grade 6061 Aluminum for superior strength
• Retains original throttle/steering sensors
• Designed for racing and can be used for recreational, too
• Fits 7/8 handlebars allowing you to select the style of bars that suit your own unique riding style
• Black anodized
• Comes with billet cover plates for a sleek design look

This steering stem will fit 2008-2011 FX but the cover plate will need modification to fit these models

Fits 2015+ Yamaha VXR, FX SVHO & 2017+ Yamahas

Increases trim range to bring the nose of your ski higher and increase speed!

Note: Only Suits Yamaha Models WITH RiDE 

Click Here To Download WR06021 Instructions

Description 

Designed not just for cutting edge performance but killer style! Best selling Worx Racing paddle now with billet insert for 4 point adjustment to personalize your watercraft to your own unique riding style! 

Includes backing rails and all necessary hardware.

Product benefits include:

Greater cornering ability and more straight line stability
Adjustable fin and backing rail to suit riding style
Easy mount to OEM holes
IJSBA Legal in all classes
Race proven performance

Description 

Designed not just for cutting edge performance but killer style! Same best selling Worx Racing paddle now with billet insert for 4 point adjustment to personalize your watercraft to your own unique riding style! 

FOR 17+ GP1800 / 11+ VXR,VXS

Includes backing rails and all necessary hardware.

Product benefits include:

- Greater stability

- Improved cornering

- Superior handling

Description 

Billet anodized construction

Allows fitment of 130mm ODI lock grips

Easy install

Billet endcap design to prevent grip sliding off if lock clamp fails

Included hardware 

NOTE: Grips NOT Included 

Description 

The Yamaha GP1800 SVHO, 2015+ VXR is the ultimate fun machine and it is with great excitement Worx Racing Components bring to you their WR246 Intake Grate designed specifically for this new model. This intake grate is a must have for both recreational riders and racers wanting to get the very best from their new GP1800 or VXR.

Designed for the ultimate hook-up and handling, this intake grate combats cavitation in choppy to rough water conditions, maximizes acceleration and even adds top end speed. Stability and cornering ability are also improved, this is a huge benefit when towing water skiers or other water toys. In testing, Worx owner Gary Watson discovered that this grate paired with Worx sponsons (WR552-I) completely transformed the all-around handling of this boat.

This will fit all models of GP, 2015 and up

Designed not just for cutting edge performance but killer style! Same best selling Worx Racing paddle now with billet insert for 4 point adjustment to personalize your watercraft to your own unique riding style! 

Specifically designed for the unique handling characteristics of the Yamaha FX and FZ hulls.

Includes backing rails and all necessary hardware.

Product benefits include:

- Enhanced control, stability, and predictability, the ski stays hooked and does not throw you off
- Stops the ski from sinking in the back in tight turns like stock sponsons
- Allows for Greater corner entry speed
- Maximized top speed performance by creating less drag
- Superior straight line stability
- Easy installation to stock mounting points

IJSBA legal for all classes

Description 

Specifically designed for the 2012 Yamaha FX SHO hull.

Benefits include:

- Closed Course and Offshore Race tested and proven Used by Chris MacClugage in 2016 P1 Aqua X skis built by the factory Yamaha Deans team!!!

- Superior hook up

- Better bow lift for top speed 

- Smoother turning

- Utilize WORX Pump Plug kit WR0703

Description 

This intake grate fits a number of the Seadoo models from the single rider HX as well as several of the three seater boats through to the 97 GTI.
It will improve hook up and cornering ability allowing you to ride the boat hard into tight turns and keep your pump fully loaded.

Designed not just for cutting edge performance but killer style! Same best selling Worx Racing paddle now with billet insert for 4 point adjustment to personalize your watercraft to your own unique riding style! 

Includes backing rails and all necessary hardware.

Product benefits include:

• Greater cornering ability and more straight-line stability
• Adjustable fin and backing rail to suit riding style
• Easy mount to OEM holes
• IJSBA Legal in all classes
• Race-proven performance

Our Worx Seadoo Spark Intake grate performs better than stock by far. Better snap off the bottom, better top speed, simply better.
Partner it up with the Spark pump plug Kit and you're really moving.

This intake grate is a must-have for anyone wanting to get the very best from their Seadoo Spark. This intake grate replaces the stock plastic intake grate with more rigid Aluminium that will stand the test of time and will maximize overall handling and hook up in all water conditions.

• Increased acceleration and drive
• Reduced cavitation with increased efficiency
• Increase stability through cornering and rough water
• IJSBA legal in all classes
• Suits both 2/3 up models

Description 

Transform your Seadoo Spark in all water conditions improving drive, control, and stability! A simple must have addition for anyone wanting top performance from this fun machine!

• Race proven  Seadoo Spark extended ride plate
• Added length creates extra nose pressure on launch allow pump hook up and quicker acceleration
• Increase handling characteristics throughout cornering
• Better straight line drive and added stability
• Redesigned stepped centre section for increase top speeds...
• Easy fitment using standard mounting points.
• IJSBA legal all classes....
• DOES NOT SUIT IBR MODELS

Description 

Easily the first choice of Modification for you ST3 Sea-Doo RXTX. During testing, we found much great stability and hook up in rough conditions and an increased speed gain with reduced impeller slip (cavitation). This grate improves both the ride and the feel of the craft and compliments the Seadoo ST3 hull extremely well.

• Redesigned for maximum hook up in Rough water conditions
• Increase in acceleration and straight-line stability
• Reduced cavitation on taking off
• Race proven design from stock class to open
• Suits all RXTX 18+ 300Hp ST3 HULL Models and GTX LIMITED, GTX 230, GTX 155 AND RTX 230 MODELS

Description 

Designed not just for cutting edge performance but killer style! Same best selling Worx Racing paddle now with billet insert for 4 point adjustment to personalize your watercraft to your own unique riding style! 

WORX Racing components WR561-I Sponsons are not just replacement paddles but also include an ‘Angle Cut Adjustable Backing Rail’ which runs parallel with the bottom of the ski and is designed to reduce nose pressure at high speeds and will let the nose settle down when you are off the throttle entering the corner.

Adjustment of height means the ability to control how much roll you want your watercraft to have to enter a corner to suit your riding style.

Having the paddle close to vertical allows for more paddle grip and with Height Adjustability to control initial turn in and mid corner hold.

Does not fit GTX ST3 or RTX 230 MODELS WR562-I for GTX and 230 Models

Suits RXPX 300 T3 Hull and RXPX 260 T3 Hull models

Designed not just for cutting edge performance but killer style! Same best selling Worx Racing paddle now with billet insert for 4 point adjustment to personalize your watercraft to your own unique riding style! 

WORX Racing components WR548-I Sponsons are not just replacement paddles but also include an ‘Angle Cut Adjustable Backing Rail’ which runs parallel with the bottom of the ski and is designed to reduce nose pressure at high speeds and will let the nose settle down when you're off the throttle entering the corner.

Adjustment of height means the ability to control how much roll you want your watercraft to have to enter a corner to suit your riding style.

Having the paddle close to vertical allows for more paddle grip and with Height Adjustability to control initial turn in and mid corner hold.

Comes with backing rails and all necessary hardware!

Description 

Easily the first choice of Modification for you T3 Sea-Doo RXPX. This intake grate is years ahead of its rivals. During testing, we found a 2mph speed gain with reduced impeller slip (cavitation). This grate improves both the ride and the feel of the craft and compliments the Seadoo T3 hull extremely well.

• Used By Multiple World Champion James Bushell for his prestigious 158 performance model watercraft.
• Redesigned for maximum hook up in Rough water conditions
• Increase in acceleration and straight line stability
• Reduced cavitation on take off
• Race proven design from stock class to open
• Suits all RXPX 16+ 300Hp Models and 2012+ RXPX 260Hp Models (T3 Hull)

Not happy with how your ski currently handles? Want to upgrade the look of your ski? Designed not just for cutting edge performance but killer style, the WR556-I sponsons are the perfect upgrade for your Yamaha ski!

Made for Yamaha 12-23 FX and 14-16 FZ models, these sponsons have been specifically designed to improve the handling performance of your Yamaha jetski. 

With the adjustability of four positions, you can tailor the positioning to your riding style! Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions. 

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Enhanced control, stability and predictability, the ski stays hooked and does not throw you off
• Stops the ski from sinking in the back in tight turns like stock sponsons
• Allows for Greater corner entry speed
• Maximized top speed performance by creating less drag
• Superior straight line stability
• Easy installation to stock mounting points
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Adjustable Paddles
• All Fasteners Needed

These pump wedges are precision designed to elevate the nose of your ski. The higher nose ride height reduces drag to give your ski an additional top speed of 1-3km/h. Allowing for a dryer ride, this simple upgrade is fast and easy to install and is a cost effective way to improve your top speed and handling!

• 2 DEG Billet anodized pump wedge
• Promotes bow lift to increase top speed from 1 to 2 mph
• Higher nose ride height allows for dryer ride
• Cost effective upgrade for better handling and top speed
• Fast and easy install

Description 

This is a similar grate to the WR201 however it is less aggressive and gives 1-2 MPH higher top speed but does not have the same braking effect as the WR201. If you want top speed and usually ride in calmer/smoother water this is the one for you. Perfectly matched to enable easy installation.

For the ultimate Freeride Combination, pair this grate with our WR314 Rideplate.

For 2008+ Superjet Owners this is a great option for those wanting a less aggressive grate than our WR228.

Description 

- Specifically designed of the 2008+ Superjet Hull
- Deeper scoop for improved hook up and turning
- Great in rough water and for surf riding
- Wide and deep pick up area which not only loads the pump but allows you to ride hard up to a turn buoy and then when you come off the throttle the grate acts like a brake to slow you into the turn

For a less aggressive alternative try our WR205. Fits all year model Superjets.

Description

Fits 1991-2014 Superjets. Also fits Waveblaster 1 & 2. Designed with a deeper scoop for a more aggressive hookup. Ideal for Freestyle, Freeride and Racing.
This is one of the first intake grates ever produced by Worx. It is used by many of the top racers and recreational riders worldwide and is the most popular Superjet/Blaster Intake grate on the market. These boats cavitate easily and lose drive because of the relatively flat intake area, the WR201 will solve these issues and will take the handling capability of your boat to new levels. It is a great rough water and surf riding intake grate because the pick-up area is wide and deep. It not only loads the pump but it also allows you to ride hard up to a turn buoy and then when you come off the throttle, the grate acts as a brake to slow you into the turn. For dramatically improved hook up and turning look no further than Worx WR201.

Description 

- Adjustable to suit your individual riding style and ability

- Constructed from Marine Grade Aluminium

- Suitable for ALL styles of riding!

- Also compatible with various aftermarket hulls

Description 

Benefits Include:

- Specifically designed for the 2008 Superjet hull

- Better drive and control

- Greater stability 

Description 

Benefits include:

- Proudly designed in conjunction with Ross Champion

- Suitable for Freeride and Freestyle riding

- D-cut design to allow the wave rider and freestyler to break the rear end loose with ease for tailwhips and aerial moves

Please note we do NOT recommend this plate for racing or high-speed applications where top speed stability is needed. This plate will NOT fit the 1993-2007 Super Jet—for this model WORX offers the WR315.

Description 

WR06014-ET

NEW REVISED DESIGN!

- Includes WORX All NEW Billet anodized Electronic throttle lever housing which utilizes OEM electronic throttle actuator up on the handlebars (no throttle cable required), Start/Stop switch holder, Steering Column and necessary hardware.
- Retains all OEM functions.
- Improved ergonomics give you a more comfortable ride with less strain on your wrists with throttle housing angle and position adjustable on the handlebars.
- Constructed from bulletproof Anodised Billet Aluminium for greater strength and durability over the OEM plastic unit which is prone to failure in high-stress environments (racing/ocean riding).
- Allows you to use higher quality aftermarket 7/8" diameter handlebars to a bend that suits your riding style.

Description 

WR06014-iBR-KIT

NEW REVISED DESIGN!

- Kit includes Steering stem, All controls, Bars and Grips (everything pictured)

Includes WORX All NEW Billet anodized Electronic throttle lever and brake lever housing which utilizes OEM electronic throttle actuator up on the handlebars (no throttle cable required), Start/Stop switch holder, Steering Column and necessary hardware, Handlebars and Grips. Everything included converting your steering.
- Retains all OEM functions.
- Improved ergonomics give you a more comfortable ride with less strain on your wrists with throttle housing angle and position adjustable on the handlebars.
- Constructed from bulletproof Anodised Billet Aluminium for greater strength and durability over the OEM plastic unit which is prone to failure in high-stress environments (racing/ocean riding).
- Comes with Pro Taper Rapter bars and ODI grips for best riding position and ultimate grip

Description 

WR06014-ET-KIT

- Kit includes Steering stem, All controls, Bars and Grips (everything pictured)

NEW REVISED DESIGN!

- Includes WORX All NEW Billet anodized Electronic throttle lever housing which utilizes OEM electronic throttle actuator up on the handlebars (no throttle cable required), Start/Stop switch holder, Steering Column and necessary hardware, Handlebars and Grips. Everything included converting your steering.
- Retains all OEM functions.
- Improved ergonomics give you a more comfortable ride with less strain on your wrists with throttle housing angle and position adjustable on the handlebars.
- Constructed from bulletproof Anodised Billet Aluminium for greater strength and durability over the OEM plastic unit which is prone to failure in high-stress environments (racing/ocean riding).
- Comes with Pro Taper Rapter bars and ODI grips for best riding position and ultimate grip

Description 

This intake grate is a must for anyone wanting to get the best from their SX-R. With the OEM grate, the boat loses hook-up in anything but flat calm water.
If you want the ultimate in hook-up and handling without sacrificing major speed loss then this is the intake grate for you.
The WR225 has twin central pickup vanes as well as the proven Worx side wing which is positioned midway between the central vanes. this grate also has a wider and deeper pickup area at the back, the combined effect is more efficient pump loading in all water conditions and better hook up and drives out of the turns. This new generation intake grate together with the totally new shape WR311 ride plate is an awesome addition and will benefit all riders from beginner to pro.

Description 

Deeply scooped grate for better hook up. Perfectly matched to enable easy installation.
The Worx Intake Grate is a must for anyone wanting to get the best from their new SX-R. In testing, we discovered that with the OEM grate, the boat lost hook up in anything but flat calm water. Many State and World titles have been won by riders using this intake grate.
The WR222 gives the boat the pump loading it needs by holding the boat on the water and keeping the pump driving in even the roughest water and in the surf. The two bars running the full length of the boat hang down the full legal IJSBA limit of 12mm (1/2") stopping the back from sliding out, the center blade of the grate does most of the work in the straights and the side wings come into play in the corners to keep the pump fully loaded and driving.

Description

 This was the first all-new standup model ski to be released by Kawasaki since 1992. It has a new 800cc engine and is extremely popular for racing and recreational riding. Worx has two different types of ride plate WR310, WR311 and intake grates WR222, WR225 for this boat and these sponsons work well with both combinations.

Our sponsons fit under the gunnel beading on the bond line of the boat where the hull and deck are joined together and come into play when the boat is leaned over into the corners. The sponsons hold the ski on the line in even the hardest turns and make getting those really tight corners to look easy.

Description 

This ride plate is a direct bolt on replacement for all recreational or competition SXI Pro's and SXR 800's allowing most riders to ride faster while expending less energy. 

The plate is considerably longer then the OEM plate with our trademark 'D' cut in it, the extra length of the plate holds the boat flatter and stops proposing, the 'D' cut makes a big difference to the handling in several ways:
1. It helps to hold the boat flatter in rough water and under initial acceleration, as the bow lifts, the 'D' cut out bites into the water pulling the boat back down which lets the pump get better hook-up and drive
2. When you are cornering hard the 'D' cut out keeps the boat more stable by allowing water to travel over the top of the plate through the cut-out

Description 

This ride plate features a wider section at the back with two concaves as well as the famous Worx ‘D’ cut-out which allows you to push the boat hard into turns and provides greater stability and less tendency to slide out. 

The wider tail section and the double concaves together with the 'D' cut make this plate far superior to anything we tested it against, the extra width is like an extension off boat length in the rough and lets you slam the boat into the hardest turns with confidence that you will be fully in control. The double concaves in the rear section also give you the extra bight needed to rail through the tightest turns.

Description 

This WR 310 is a totally new design for the SXR developed for WORX back in 2004 by team rider Jordan Fielder and his US tuner Ronnie Saner. This ride plate was used by Jordan to take out number 1 in Pro Mod class at World Finals that year.

Description 

- Greater stability

- Improved cornering

- Superior handling

- Lets you lean in and ride the boat aggressively without the back sliding out on you

Description 

The largest of the Kawasaki range, the STX introduced in 2000 as a two-stroke and then in later models fitted with the 12F and 15F four-stroke engines these boats really benefit from an efficient intake grate to properly load the pump and get the best from your Kawi.
Performance benefits include:
- Better hook up in all conditions
- No top speed loss
- Better pump loading in rough water
- Holds the boat on the water giving better control
- Better cornering because the Worx grate has two rails running the full length that hang down 12mm below the pump cavity which stops the boat sliding out

Performance Benefits:

• Better handling when cornering, smoother more controlled turning
• Our sponsons let the boat ride higher in the bow which gives several advantages
• Dryer ride in all conditions
• Higher top speed because the boat rides higher in the water, around 1 1/2 - 2 MPH speed gain
• Adjustability to suit your riding style - down position (top hole) for recreational riding and racing and up position (bottom hole) for enduro rides or races, this position will give you more speed but less aggressive cornering

Description 

• 2 DEG Billet anodized pump wedge
• Promotes bow lift to increase top speed from 1 to 2 mph
• Higher nose ride height allows for a dryer ride
• Cost effective upgrade for better handling and top speed
• Fast and easy to install

Description 

These boats hook up pretty good in the calm but really benefit from our intake grate in choppy to rough water, the Worx grate will not cost you any top speed in the calm and will give you heaps better hook up and drive in rough water and around the track for closed course racing. Our unique design ensures the back of the boat does not slide out and that the pump stays fully loaded to combat cavitation. The pick up point at the rear of the intake grate has also been shifted forward to improve rough water hook up.