• Increased throttle response through the rpm range
• Allows removal of restrictive OEM exhaust baffle for increased performance
• Gives nice exhaust tone
• Lightweight molded silicone hose
• Billet anodized rear Exhaust outlet
• Easy install with all hardware provided in kit
• Suits 2 seater style sparks only (DOES NOT FIT 3 SEATER MODELS)

Email Tristana@browardmotorsports.com

The Worx Sea-Doo rear exhaust kit removes the restrictive OEM sound suppression baffle to reduce back pressure for an increase if engine performance and maximum exhaust flow.

Email Tristana@browardmotorsports.com

The Worx Sea-Doo rear exhaust kit removes the restrictive OEM sound suppression baffle to reduce back pressure for an increase if engine performance and maximum exhaust flow. 

• Features a black anodized aluminum tube that is easily installed
• Gives your watercraft upgraded performance, race look, and tough exhaust tone
• No fuel management required

THESE ITEMS ARE FOR DESIGNED FOR CLOSED COURSE COMPETITION.  USE ON PUBLIC LANDS AND/ OR WATERWAYS IN THE STATE OF CALIFORNIA IS ILLEGAL.

Email Tristana@browardmotorsports.com

Upgrade your ride with the WORX Racing Freeflow Exhaust — designed for performance, sound, and simplicity. Our exhaust features a high-quality silicone hose, making installation faster and easier than traditional setups. No drilling or additional holes are required, so you can bolt it on and enjoy instantly.

Experience increased throttle response and a deeper, more aggressive sound that enhances your ride without compromising performance. Built for riders who demand effortless installation, superior quality, and that signature WORX Racing tone.

Key Features:

• Premium silicone hose for easy fitment, engineered from high thread silcone hose to absorb drone

• No hole required — simple bolt-on installation

• Enhanced exhaust sound for a more aggressive ride

• Designed for reliability and performance

• Kit includes, silicone hose, billet outlet, gasket and all required hardware

Fitment

• 1991-2011 Sea-Doo

Rear Exhaust Kit – Yamaha GP1800, FX, FZ (2008–2018) & VXR/VXS (2015+)

Take your ski to the next level with our high-performance rear exhaust kit, designed to eliminate restriction, boost power, and give your ride that aggressive, race-ready look. Featuring a massive 3-inch black billet anodised outlet, this kit gives your ski a tough note ???? and means business—on and off the water.

? Moulded black silicone hose – for a smooth, easy installation

? 3-inch billet anodised exhaust outlet – bold, blacked-out, and built to perform

? Billet anodised block-off plate – clean and durable finish

? Deletes restrictive sound suppression baffles – freeing up power and improving flow

? Silicone hose design – helps reduce drone and exhaust resonance

? Essential for high-horsepower and race applications

Full disclaimer: All aftermarket exhausts—ours included—will make your ski noticeably louder.
If you want to turn heads and sound as tough as you ride, this is the upgrade for you. If not... the stock setup might be more your style ??

Instructions

Download Instructions

Fitment

• 2015-2019 Yamaha

WORX Yamaha superjet exhaust sleeve fits directly into the OEM exhaust muffler and reduces the stinger size of the pipe to create more back pressure in the pipe for increased top speed.

Used by all Pro National and World Lites class Champions 

Fitment

• 1990-2020 Yamaha
• 1990-2020 Yamaha Superjet

WORX Sea-Doo Free Flow Exhaust Elbow – 2016+ Models

A favourite among Sea-Doo owners, this is one of the quickest upgrades you can make! The WORX Free Flow Exhaust Elbow replaces the restrictive OEM sound suppression baffle in 2017+ models (excluding Spark) and 2016+ 300HP skis—giving your ride a louder, deeper exhaust note in just 15 minutes.

?? Quick & easy install – 15 mins
?? Tough black-coated aluminium
?? Improves sound + allows easier intercooler access
?? Guaranteed to turn heads on the water

Fits:
• 2016+ RXP-X, RXT-X, GTX LTD 300hp models
• 2017+ Naturally Aspirated GTI, GTR, GTX, GTI 900 ACE models (excludes Spark)

Heads up! All aftermarket exhausts (yep, even ours) are significantly louder than stock. 

If you’re keen to turn heads and sound like a total weapon, this is the upgrade for you.

If your idea of fun is peace, quiet, and hearing your own thoughts... stock’s calling. Probably with a cup of chamomile.

Instructions

Download Instructions

Fitment

• 2016-2020 Sea-Doo
• 2016-2020 Sea-Doo 4-TEC

Unlock More Power and Sound ???? – No Cutting Required

Ditch the factory restrictions and unleash your ski’s true potential. This system removes the restrictive sound suppression baffles in your exhaust for increased performance and a more aggressive tone.

? No drilling or cutting required – uses the OEM pump tunnel outlet

? No hose modifications needed – easily return to stock if desired

? Billet anodised outlet – precision-engineered to fit directly into the OEM location

? Designed for modified machines – an essential upgrade for performance builds

? Compatible with all 2008+ Yamaha 1.8L models (Excludes EX & EXR)

Ready to ride harder, louder, and faster? This is the upgrade your ski has been waiting for.

SILICONE HOSE NOW WITH RED INTERIOR! Improved durability and performance, because we know you like to push limits.

Full disclaimer: All aftermarket exhausts—ours included—will be significantly louder.
So if you want to sound tough and be heard, this upgrade’s for you. If not… maybe stick with the stock setup and enjoy the quiet life ??

Instructions

Download Instructions

Fitment

• 2014-2020 Yamaha

WORX Sea-Doo Free Flow Exhaust Elbow – 4-Tec Models

Upgrade your Sea-Doo’s performance and sound with the WORX Free Flow Exhaust Elbow. This direct replacement for the OEM sound suppression baffle frees up your exhaust flow, giving you improved throttle response and a noticeably sportier exhaust note.

?? Black anodised aluminium
?? Easy bolt-on install
?? Built for all Sea-Doo 4-Tec watercraft (except 300hp models)

Note:
Some early models (like the 2004 RXP) may require modification.
Not compatible with 2002–2003 GTX.
All 2017+ models require part No: WR04029 instead.
If you’re unsure, just reach out – we’re here to help.

Heads up! All aftermarket exhaust mods (yep, even ours) will make your ski significantly louder than stock. 

If you’re keen to turn heads and sound like a total weapon, this is the upgrade for you.

If your idea of fun is peace, quiet, and hearing your own thoughts... keep it stock ??

Instructions

Download Instructions

Fitment

• Sea-Doo
• Sea-Doo 4-TEC

Ready to unleash that signature throaty sound????? This rear exhaust kit delivers bold performance and an aggressive tone—whether you're tearing it up on race day or chasing thrills on the weekend.

Features:

? 2.5 inch black anodised billet outlet – built tough, looks tougher

? Moulded silicone hose – eliminates resonance for that deep, clean growl

? Standard outlet block-off included – everything you need in one kit

? Deletes factory sound suppression baffles – for unrestricted flow and max attitude

? Suitable for recreational and race skis

? Fits GTR, GTI, RXPX T3 Hull, and early 4-Tec models

? Note: OPAS removal may be required prior to install

?? Does NOT fit S3 hull skis or new RXPX 300 models

This exhaust was originally designed for a 2012 RXPX. Fitment has been confirmed across many models. However, some recent models may require the alternate block-off kit (WR04013-2), which blocks the exhaust from the inside of the hull.

Disclaimer: Aftermarket exhausts (yep, including ours) are… wait for it… LOUD. If you like to make an entrance and be heard before you’re seen, you’re in the right place.

If your idea of fun is scenic detours and deep chats about fuel economy… stock’s probably more your speed ??

Instructions

Download Instructions

Stock exhaust holding you back? Rip it out and let your Spark breathe, roar, and perform the way it should with the Worx Racing Freeflow Exhaust Kit. Designed to ditch that restrictive baffle, this kit boosts throttle response, cuts back pressure, and gives you that deep, aggressive exhaust note you want.

?? NOW WITH RED INTERIOR! Tougher, stronger, and built for max durability and performance.

? More Power, Less Restriction – Better flow means snappier throttle response and reduced back pressure.
? Lightweight & Durable – Moulded silicone hose with red interior for extra strength and longevity.
? OEM Fitment, Race-Ready Sound – Uses the factory exhaust exit location for easy, clean installation.
? Easy Install – Comes with everything you need—just bolt it up and send it.
? Fits 2 & 3-Seater Sparks – Including iBR models.

Rip, roar, and ride harder. Your Spark just got a serious attitude upgrade.

Heads up! All aftermarket exhausts (yep, even ours) are significantly louder than stock. 

If you’re keen to turn heads and sound like a total weapon, this is the upgrade for you.

If your idea of fun is peace, quiet, and hearing your own thoughts... stock’s calling. Probably with a cup of chamomile.

Instructions

Download Instructions

Want your Spark to sound as good as it rides? Ditch the restrictive stock baffle and let your engine breathe with the Worx Racing Performance Exhaust Kit. More power, better throttle response, and a deep, throaty exhaust note that turns heads. Plus, that billet anodized rear exhaust outlet gives your ski a serious performance look, because fast should look fast.

NOW WITH RED INTERIOR! Improved durability and performance, because we know you like to push limits.

? More Power, More Noise – Improved exhaust flow for better throttle response across the rev range.
? Lightweight & Durable – Moulded silicone hose with new red interior for extra strength and longevity.
? Performance Look – Billet anodized rear exhaust outlet screams race-ready.
? Easy Install – Comes with all the hardware you need, no headaches, just horsepower.
? Fits 2-Seater Sparks – (DOES NOT FIT 3-SEATER MODELS. For that, check out the WR04008).

Bolt it on. Open it up. Ride harder.

Heads up! All aftermarket exhausts (yep, even ours) are significantly louder than stock. 

If you’re keen to turn heads and sound like a total weapon, this is the upgrade for you.

If your idea of fun is peace, quiet, and hearing your own thoughts... stock’s calling. Probably with a cup of chamomile.

Instructions

Download Instructions

Fitment

• 2014-2020 Sea-Doo
• 2014-2020 Sea-Doo Spark

Meet the first ever Dual Rear Exhaust Kit for the Sea-Doo Spark. Built for riders who want performance, style, and a soundtrack that turns heads.

Our high-performance silicone hose, gives you unbeatable durability, heat resistance, and a perfect fit, without the extra drone that can accompany Aluminium piped exhausts. This setup removes the restrictive OEM sound box, unlocking sharper throttle response, better flow, and pure riding satisfaction.

And the sound? Let’s just say it is louder than your nana’s snoring, so if you are not into making noise, this is not for you. But if you want your Spark to growl like it means business, you have just found your upgrade.

Features and Benefits:

• First ever dual rear exhaust designed specifically for the Sea-Doo Spark

• High-performance silicone couplers for flexibility, heat resistance, and long-lasting durability

• Removes OEM sound box to reduce back pressure and improve throttle response

• Deep, aggressive exhaust note that commands attention on the water

• Precision fitment with all hardware included for easy installation

• Stylish dual outlet design to give your Spark a race-ready look

Easy to install. Built to last. Guaranteed to make waves.

Warning: May cause excessive grinning and neighbour complaints.

Take your Sea-Doo to the next level with aggressive sound and performance.

? 2.5" Billet Exhaust Outlet – Precision-machined and anodised for durability and style
? Moulded Silicone Hose – Designed to eliminate resonance for a deep, throaty exhaust note
? OEM Block-Off Plug Included – Comes complete with standard outlet block-off
? Deletes Restrictive Baffles – Frees up your exhaust flow for improved performance
? Built for Power – Perfect for both recreational riders and racers alike
? Fitment – Suits Sea-Doo RXPX 300 and GTR 230 (2017+)

?? Note: For all other Sea-Doo 4Tec models (non-300), we recommend the WR04013 Exhaust Kit instead.

Disclaimer: Aftermarket exhausts (yep, including ours) are… wait for it… LOUD. If you like to make an entrance and be heard before you’re seen, you’re in the right place.

If your idea of fun is scenic detours and deep chats about fuel economy… stock’s probably more your speed ??

Instructions

Download Instructions

Fitment

• 2018-2020 Sea-Doo
• 2018-2020 Sea-Doo GTR 230, RXTX

🔥 The Ultimate Exhaust Upgrade for Your RXP-X

Ready to give your RXP-X the sound it deserves?
The Worx Rear Exhaust Kit for 2021+ Sea-Doo RXP-X is here to level up your ski’s tone and attitude.

Engineered for performance and built to last, this kit delivers a deep, aggressive exhaust note with a slight bump in performance to match.

✅ Billet Anodised Aluminium Outlet – Built tough, looks clean, and features our signature Worx logo
✅ High-Thread Silicone Hose – Designed to absorb drone and vibration for a smoother, deeper sound
✅ Sleek Rear-End Finish – Subtle yet unmistakably performance-driven
✅ Complete Bolt-On Kit – Everything you need to get your ski sounding grunty, smooth, and ready to turn heads

Whether you're carving buoys or cruising the bay, this is the exhaust your RXP-X was born to run.

Heads up! All aftermarket exhausts (yep, even ours) are significantly louder than stock. 

If you’re keen to turn heads and sound like a total weapon, this is the upgrade for you.

If your idea of fun is peace, quiet, and hearing your own thoughts... stock’s calling. Probably with a cup of chamomile.