WORX RACING

Yamaha Superjet ECU Reflash Service

$550.00

Whether you've just hopped on your Yamaha for the first time or been riding it for years and want to upgrade, a Worx Tune is always a great idea!

As one of the easiest upgrades to make, the upgrade process is super straightforward! All you have to do is remove your ECU, send/drop it in to us. We'll upgrade the ECU and send it back the same or next day we receive it!

If you'd like a different tune, make sure you write this down on your ECU reflash form when sending us your ECU.

Worx Racing Components highly recommends upgrading your impeller to a lower pitch to truly get the best out of your ski. A lower pitch prop will achieve a higher RPM and get you closer to that sweet spot for an overall increase in performance.

Worx has a wide range of ECU tunes available that have been tried and tested over countless skis. If you're unsure about whether a tunes right for your ski, don't hesitate to contact us at: info@worx.com.au

Benefits:

Remove Boost Limit
Advanced Ignition timing for increase in low and mid range acceleration
New fuel and ignition table for top RPM range
No engine internal modifications required

CAUTION: These tunes are suited for 98 Octane fuel only.

While Worx Racing Components make their best effort to ensure our tune library is up to date, unfortunately due to shifts between models, even within the same year, some skis may differ slightly. In this case Worx will get back to you in a timely manner in the event that the Reflash may take longer than expected or not be able to be completed.

PLEASE NOTE: This is a ECU reflash service performed on your stock ECU
Once you place your order please print the below ECU form and send the completed for with your ECU. WORX aim to perform this service the same or next business day the ECU is received and will return your ECU to you via a fully trackable overnight service.

Please Print & complete the following form. We receive multiple ECU's each day. Completing the below form ensures quick and accurate turn around of each ECU reflash order.

Fitment

2021, 2023-2025 Yamaha
2021, 2023-2025 Yamaha Superjet

Yamaha NA 4 Inch Air Filter Kit

WR04043

$199.00

*Suits all 1.8 Naturally aspirated engines

Allows for maximum Air Flow to your engine

* Increased acceleration and overall RPM's

* Race proven design a must for any Modified/ Race watercraft

* Engine Breather Filter also provided in kit

Instructions

Fitment

2008-2021, 2023-2025 Yamaha

Solas 13/19 Reflashed 08+ Yamaha FX HO, SHO & FX Cruiser HO, 11+ VXR and VXS Impeller

YS-CD-13/19

$312.84

These Solas Yamaha Waverunner impeller will give you better performance (1-2 MPH Gain) over your stock impeller. You will also see reduced cavitation, better holeshot with increased acceleration. The Solas Yamaha impellers pro design are made of stainless steel.

Fitment

2009-2021, 2023 Yamaha
2009-2021, 2023 Yamaha FX HO, SHO, VXR, VXS

Solas 13/19 Reflashed 08+ Yamaha FX HO, SHO & FX Cruiser HO, 11+ VXR and VXS Impeller

Kawasaki 2017+ SXR1500 High Chop Intake Grates

WR248

$225.00

This intake grate is a must for any one wanting to get the best from their SX-R. With the OEM grate the boat looses hook-up in anything but flat calm water.

If you want the ultimate in hook-up and handling this is the intake grate for you.
Designed specifically for choppy environments, this intake grate sacrifices a small amount of speed in favour of superior handling.

The WR248 has twin forward pickup vanes as well as the proven Worx side wing which is positioned midway between the central vanes. This grate also has a This new generation intake grate is an awesome addition and will benefit all riders from beginner to pro.

Instructions

Fitment

2017-2021 Kawasaki

Kawasaki 2017+ SXR1500 High Chop Intake Grates

2020+ Seadoo GTR, GTI, GTS Sponsons With Spacers

WR564-I-S

$490.00

Want to corner tighter and faster? Make your jet ski feel like it's turning on rails with Worx Racing Component's WR564-I Sponsons.

Made for Seadoo 2020 GTI, GTS & GTR models, these sponsons have been specifically designed to improve the handling performance of your Seadoo ski. Initial testing found the GTR and GTIs unreliable in straight line handling and had a tendency to chine walk. The new sponsons directly combat that and reduce the need for constant steering adjustments when travelling in a straight line.

With included spacers and 4 position adjustable paddles, and optional spacers, you're able to select from 8 different positions to tune in the lean-in-handling characteristics of your jetski, making your ski's handling more or less aggressive!

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business.

Features:

Improved direct response in cornering
More predictable handling
Greater straight line stability
Made in Australia

Includes:

2 x Backing Rails
2 x Adjustable Paddles
2 x Spacers
All Fasteners Needed

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Fitment

2011-2021, 2023-2025 Sea-Doo