Billet anodized construction

Allows fitment of 130mm ODI lock grips

Easy install

Billet endcap design to prevent grip sliding off if lock clamp fails

Included hardware

DOES NOT FIT SPARK Models or New ST3 2018 model steering

NOTE: Grips NOT Included 

Want to get rid of your OEM grips and slip on some new ones? If you've got a yamaha, there's a good chance you'll need this little guys. Super easy to install, these extensions fit on the end of your OEM bars to securely lock in your grips and prevent them from sliding off if your locking clamp fails.

These bar extensions can be install in less than five minutes and their billet anodized construction and sleek minimal design ensure they'll suit any ski or aftermarket grips.

All hardware included.

Fitment

• Yamaha

Billet anodised construction

Fits 7/8 handle bars

Suits All style 4-tec DESS Posts

Fitment

• Sea-Doo

New from WORX Racing - Billet Anodised iBR/iTC Switch Panel housings to suit aftermarket handlebars when combined with our Steering System.

- Adjustable to suit riding hand postions for ultimate control

- OEM switch panel drops straight in (requires NO modifications)  

- Also holds Start/stop switch and button

- Will suits Sea-Doo Sparks with optional VTS fitted

- For use with aftermarket handlebars combined with WORX Racing Steering System

Fitment

• Sea-Doo

New from WORX Racing - Billet Anodised iBR/iTC Switch Panel housings to suit aftermarket handlebars when combined with our Steering System.

- Adjustable to suit riding hand postions for ultimate control

- OEM switch panel drops straight in (requires NO modifications)  

- For use with aftermarket handlebars combined with WORX Racing Steering System

Fitment

• Sea-Doo

WORX Racing  All NEW Billet Anodised iBR (reverse) Electronic actuator housing which utilises OEM electronic actuators up on the handle bars (no throttle cables required),

- Billet anodised construction

- Utilises OEM electronic actuator which drops into new housing for OEM electronic trigger feel

- Suits all Sea-Doo models with  iBR

- Clamp on Handle bar design allows for adjustability of throttle position and angle

Fitment

• 2012-2020 Sea-Doo

Billet 1/2" fitting, specifically designed for easy installation of added cooling lines. Versatile and low footprint design allows for use through various applications.

Want that extra level of protection? 

Worx Racing Pre-Filter wraps are designed to give you that extra peace of mind when it comes to your Air Filter. Designed to keep your Air Filter dry through extreme rides, while still ensuring maximum air flow to your ski.

Made from a durable, water repellent polyester material, these pre-filters guarantee extra life for your air filter and ski and provide a universal fit for 6" pod filters.

Comfortably fits all Worx Aftermarket Air filters excluding sparks.
For Seadoo Sparks, use WR-PF-4

Fitment

• Sea-Doo

Want that extra level of protection? 

Worx Racing Pre-Filter wraps are designed to give you that extra peace of mind when it comes to your Air Filter. Designed to keep your Air Filter dry through extreme rides, while still ensuring maximum air flow to your ski.

Perfectly fits our Seadoo Spark Air Filter Upgrade! 

Made from a durable, water repellent polyester material, these pre-filters guarantee extra life for your air filter and ski and provide a perfect fit for your Worx Seadoo Spark Air Filter!

Fitment

• Sea-Doo
• Sea-Doo Spark

This complete kit includes (8) Washers, (8) Studs and (8) Nuts. Constructed from premium 8740 alloy our Stud Kit will provide more accurate and consistent torque loading.

A must have for any engine re-build or performance modifications!

Kit includes 8 x stud/nut/washer. Picture for illustration purpose only

Fitment

• Sea-Doo
• Sea-Doo 1503, 1630

A must for any Modified/ High Horsepower application for maximum fuel delivery

Increased fuel delivery for high boost/ high RPM engines

Requires remapped ECU or Aftermarket ECU to operate

Kit comes with all required Hardware and adaptors (3 injector kits included)

Fitment

• Sea-Doo

The ODI/Troy Lee Designs Signature Series grips are designed for optimal control in wet conditions. Grooved Channels prevent water buildup while overmolded flaps give added protection on outside clamp.

PRODUCT FEATURES:

• 130mm Length
• 7/8" (22mm) Inner Diameter
• Unique Undercut pads give slim comfortable feel with the ultimate amount of grip
• Custom flanged design provides hand support with more usable grip surface
• Etched Inside clamp provides clocking system to assist on installation
• Includes new Snap Cap End Plugs

Fitment

• Sea-Doo

Ruffian Watercraft grips are designed for optimal control in wet conditions. The grip's narrow diamonized surface pattern provides an excellent gripping system and the Lock-On design offers 100% slip-free performance. Guaranteed.

PRODUCT FEATURES:

• 130mm Length
• 7/8" (22mm) Inner Diameter
• Large Raised Pads and Deep Grooves
• Knurled Surface Pattern for Better Traction
• No Flange
• 100% Slip-Free Performance
• Includes new Snap Cap End Plugs

Fitment

• Sea-Doo

Ruffian Watercraft grips are designed for optimal control in wet conditions. The grip's narrow diamonized surface pattern provides an excellent gripping system and the Lock-On design offers 100% slip-free performance. Guaranteed.

PRODUCT FEATURES:

• 130mm Length
• 7/8" (22mm) Inner Diameter
• Large Raised Pads and Deep Grooves
• Knurled Surface Pattern for Better Traction
• No Flange
• 100% Slip-Free Performance
• Includes new Snap Cap End Plugs

Fitment

• Sea-Doo

Rogue Watercraft grips are designed for optimal control in wet conditions. The grip's narrow diamonized surface pattern provides an excellent gripping system and the Lock-On design offers 100% slip-free performance. Guaranteed.

PRODUCT FEATURES:

• 130mm Length
• 7/8" (22mm) Inner Diameter
• Large Raised Pads and Deep Grooves
• Knurled Surface Pattern for Better Traction
• No Flange
• 100% Slip-Free Performance
• Includes new Snap Cap End Plugs

Fitment

• Sea-Doo

ODI's MX Handlebars are constructed of 7075 Alloy material. The 7/8" bar is designed for riders looking for a stock replacement or feel. Available in four bend options this bar is ideal for MX, ATV and Mini bike racers.

PRODUCT FEATURES:

• Solid crossbar
• 7/8" diameter to work on Pit Bike clamp diameter
• Laser Etched graphics
• Knurled left slide helps with grip bar adhesion
• Constructed of 7075 alloy for added strength
• Includes black crossbar pad (not displayed)

Specifications:

• Width: 785mm
• Height: 145mm
• Rise: 117mm
• Clamp Area: 123mm
• Sweep: 48mm
• Control Area: 200mm

Fitment

• ODI

ODI's MX Handlebars are constructed of 7075 Alloy material. The 7/8" bar is designed for riders looking for a stock replacement or feel. Available in four bend options this bar is ideal for MX, ATV and Mini bike racers.

PRODUCT FEATURES:

• Solid crossbar
• 7/8" diameter to work on Pit Bike clamp diameter
• Laser Etched graphics
• Knurled left slide helps with grip bar adhesion
• Constructed of 7075 alloy for added strength
• Includes black crossbar pad (not displayed)

Specifications:

• Width: 775mm
• Height: 92mm
• Rise: 64mm
• Clamp Area: 115mm
• Sweep: 49mm
• Control Area: 196mm

Fitment

• ODI

High Strength Bolt kit for direct replacement of OEM Flywheel bolts that are prone to failure on modified watercraft.

Suits all Yamaha 1.8 models

Suit SeaDoo 4-tec 1503 and 1630 ACE engine

Sold in Pack of 6

Instructions

Fitment

• 2020 Sea-Doo

We get it, you want people to know you're running Worx parts. Why wouldn't you? 

That's why we've put together this awesome sticker pack!