Description 

Full set of 12 CNC machined retainers manufactured from high strength and hardened aerospace certified titanium alloy. Designed to add strength while offering weight reduction, all of our titanium retainers are finished to precise tolerances.

A must for any Sea-Doo looking to rev over 8400 rpm

Perfect to use in combination with any 8400+ rpm tune

Suits ALL Sea-Doo 4-Tec 1503cc and ACE 1630cc Engines

Features

Description:

CP forged racing pistons deliver maximum reliability and performance in high boost supercharged & turbo applications. High strength piston kits include premium ring package, tool steel wrist pin & carbon steel wire locks. Sold individually.

Key Features Include:

• CNC machined from high strength/lightweight forgings.
• Optimized dome design for efficient combustion.
• Improved lubrication hole placement for reduced friction.
• Premium low friction ring package.
• High-strength tool steel wrist pins machined from special tool steel bar stock & heat treated.
• Carbon steel wire locks.

Fits:

2021 SEA-DOO RXT-X 300
2021 SEA-DOO GTX LIMITED 300
2021 SEA-DOO GTX 300
2020 SEA-DOO RXT-X 300
2020 SEA-DOO RXP-X 300
2020 SEA-DOO GTX LIMITED 300
2019 SEA-DOO RXT-X 300
2019 SEA-DOO RXP-X 300
2019 SEA-DOO GTX LIMITED 300
2018 SEA-DOO RXT-X 300
2018 SEA-DOO RXP-X 300
2018 SEA-DOO GTX LIMITED 300
2017 SEA-DOO RXT-X 300
2017 SEA-DOO RXP-X 300
2017 SEA-DOO GTX LIMITED 300
2016 SEA-DOO RXT-X 300
2016 SEA-DOO RXP-X 300
2016 SEA-DOO GTX LIMITED 300

The MLS gasket is compromised of three layers of Stainless Steel. Cometic uses Stainless steel for increased strength, it’s ability to rebound and corrosion resistance. The outer layers of the gasket are embossed and coated on both sides with a flouroelastometer rubber based material (viton) designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 250 C or 482 F.

Fits:

155/260/300 Motors

Description:

Our BMS Racing Waterbox delivers increased horsepower and performance by reducing exhaust restriction and back pressure. The short design allows easy servicing of supercharger without removal of exhaust system. High-strength aluminum construction & precision welds will withstand backfires & overheating. Anodized to prevent corrosion.

Key Features:

• Will deliver up to 10hp on modified watercraft
• Ribbed tube flanges for reliable coupler retention.
• Radiused exhaust tubes & end caps.
• Anodized grey to prevent corrosion.
• Fits all Sea-Doo 2020+ models with 1630 engine.

Fits:

2022 SEA-DOO WAKE PRO 230
2022 SEA-DOO RXT-X 300
2022 SEA-DOO RXP-X 300
2022 SEA-DOO GTX 300
2022 SEA-DOO GTX 230
2022 SEA-DOO GTR 230
2022 SEA-DOO GTI SE 170
2022 SEA-DOO GTI SE 130
2022 SEA-DOO GTI 130
2021 SEA-DOO WAKE PRO 230
2021 SEA-DOO RXT-X 300
2021 SEA-DOO RXP-X 300
2021 SEA-DOO GTX LIMITED 300
2021 SEA-DOO GTX 300
2021 SEA-DOO GTX 230
2021 SEA-DOO GTR 230
2021 SEA-DOO GTI SE 170
2021 SEA-DOO GTI SE 130
2021 SEA-DOO GTI 130
2020 SEA-DOO WAKE PRO 230
2020 SEA-DOO RXT-X 300
2020 SEA-DOO RXP-X 300
2020 SEA-DOO GTX LIMITED 300
2020 SEA-DOO GTX LIMITED 230
2020 SEA-DOO GTX 230
2020 SEA-DOO GTX 170
2020 SEA-DOO GTR 230
2020 SEA-DOO GTI SE 170
2020 SEA-DOO GTI SE 130 (IBR)
2020 SEA-DOO GTI 130 (IBR)

Worx's new Seadoo Oil Catch-Can collects excess oil vapours that would otherwise pass through your engine's air intake. The oils condense in the Catch-Can for easy periodic emptying through our convenient, bottom-mounted brass drainage plug. This catch-can is extremely easy to install and can either be used in conjunction with our recommended performance Seadoo Air Filters or as a standalone solution with OEM parts. 

Extend the life of your ski and maintain performance with this affordable catch-can, a must for any PWC rider that wants to look after their ski!

✓ - Ensures Consistent Performance

✓ - Improves Engine Efficiency

✓ - Aluminium Billet Construction

✓ - Convenient Bottom Mounted Drainage Plug

✓ - Fast & Easy Installation

Let your engine breathe better! This kit allows you to easily remove the restrictive filter element from inside the intake manifold. Removing the restriction increases horsepower and allows for gains of ~1 PSI of boost pressure. Included is a cutting guide for the required 3-1/8” (79mm) hole saw that’s needed to remove the filter element (hole saw sold separately). The void left by the filter element is filled with the provided precision machined billet aluminum block-off plug with o-ring seals and also includes a 2-piece billet aluminum clamp to secure the block-off plug in place. The block-off plug also features a 1/8” NPT threaded port that allows you to connect a vacuum line to work with a wide array of accessories such as blow off valves, boost gauges, or rising rate fuel pressure regulators. All the aluminum components are anodized for increased corrosion protection.

Fits all Sea-Doo 325, 300, and 230 HP watercraft

Change your watercraft’s oil yourself with the 4T 5W-40 Full Synthetic Oil Change Kit for engines of 1500 cc or more. If you enjoy working on your vehicle and like to get your hands dirty, this kit has exactly what you need: XPS Synthetic Oil, oil filter, o-rings and washer. Tested and designed to improve performance, our XPS oils last longer and protect your engine better than other oils. Plus, there’s nothing better than getting it done with our own two hands!