Fizzle Yamaha Intercooler Tubing Upgrade Kit with TiAL BOV
NOTE:Stock plastic air-box must be removed in order to create clearance for the TiAL Blow Off Valve.
Improve reliability and performance by replacing the soft and flimsy stock rubber intercooler hoses with the Fizzle heavy-duty reinforced tubing kit for your Yamaha SHO/SVHO watercraft. Fits all supercharged Waverunners and jet boats 2008-2019. Includes a genuine 50mm TiAL blow-off valve.
Enables you to run a blow-off valve to relieve excess pressure in off-throttle situations
Increased throttle response
5-ply heavy duty silicone construction
Internal metal reinforcement
High-quality marine-grade 316 Stainless Steel hose clamps included
WORX Yamaha Blow Off Valve Assembly 1.8L SHO/SVHO
Our cost-effective design BOV will greatly improve supercharger clutch life in your Yamaha 1.8 engine. Kit includes a High Strength silicone hose that incorporates a Billet lightweight “Blow off Valve’, necessary vacuum lines and fittings for install.
Easy install to OEM location
Lightweight billet construction less load on the hose to reduce fatigue and tearing
Easy to disassemble for cleaning and maintenance
Cost effective upgrade for stock or modified skis
ET 17lb Billet Supercharger Wheel SVHO
Engine-tech has been working on this project for quite some time and is now complete. The results are outstanding 17 lbs of boost @ 8500 rpm. Machined from billet 7075-T651 using a 5 axis CNC machining center allows a blade accuracy of .001. Balance to a spec of .009 inch gram and comes completely anodized gold for protection against the elements(corrosion resistant)
WORX SeaDoo Intercooler 300
WORX Racing Performance Sea-Doo 300 ACE Intercooler provides huge gains over OEM Intercooler providing cooler denser air to the engine increasing horsepower! WORX Racing Sea-Doo intercooler is a direct replacement of all Sea-Doo 300 ACE external intercoolers and is suitable for all applications from stock to open turbo watercraft. Unit comes with necessary water fittings to suit OEM cooling applications, pressure bleeds on the front of the unit and a replaceable sacrificial anode to extend intercooler life.
Come with all brass fittings included
Requires OEM exhaust sounds suppression baffle to be removed to install. (WR04029 freeflow available)
ET SVHO 26lb GEN2 wheel
Yamaha SVHO E-T S/C Wheel
ET 26LB GEN2 Billet Supercharger Wheel
Yamaha SVHO FZR FZS S/C 26lb GEN2 14 g lighter
Race-proven the ultimate limited Supercharger wheel.
Engine-tech has been working on this update and is now complete. The results are outstanding lower out temps increased midrange and more boost. Lighter by 14 grams to increase clutch life. 26 lbs of boost @ 8500 rpm. Machined using a 5 axis CNC machining center allows a blade accuracy of .0002. Balance to a spec of .009 inch gram and comes completely anodized gold for protection against the elements(corrosion resistant).
Requires an aftermarket shaft.
Fizzle Sea-Doo 300 Intercooler Tubing Upgrade Kit
Improve reliability and performance by replacing the soft and flimsy stock rubber intercooler hoses with the Fizzle heavy duty reinforced tubing kit for your Sea-Doo 300 watercraft. Fits all Sea-Doo 300 watercraft RXP-X 300, RXT-X 300, GTX 300.
Replaces stock hoses that are prone to bursting under heavy boost pressure
Increased throttle response
5-ply heavy duty silicone construction
Internal metal reinforcement
Easier to install than stock rubber hoses and aftermarket piping kits
High-quality marine grade 316 Stainless Steel hose clamps included
Compatible with stock Sea-Doo 300 Intercooler, Fizzle SuperCooler, or Riva Gen. 4 Intercooler
Tested on a heavily modified closed course Sea-Doo 300 race jetski with 23 PSI supercharger
Fizzle SuperCooler Seadoo 300
Direct replacement for OEM Sea-Doo 300 HP intercoolers.
Compatible with OEM Sea-Doo 300 HP rubber intercooler air hoses and Riva Gen. 4 intercooler piping kit
Maximize throttle response and achieve lower Air Intake Temperatures (AIT)
Eliminate intercooler heat fade
Kit contents: Fizzle™ SuperCooler with waterline fittings and zinc anode
Utilizes stock intercooler location, works with the stock exhaust system or aftermarket exhaust
Designed for maximum horsepower capacity
Integrated zinc anode for added protection against corrosion
Fizzle Y1000 Yamaha Intercooler Kit w/ TiAL BOV, or HKS BOV
Includes authentic TiAL or HKS (your choice) blow off valve
Gain 2-3+ MPH top speed over OEM Yamaha SHO or SVHO intercooler
Gain 200-300+ peak RPMs, acceleration and throttle response
Kit Contents: The intercooler with blow-off valve flange, full piping kit, mounting bracket system, and cooling line fittings
Fits all supercharged Yamaha watercraft 2008-2019, including FZR, FZS, GP1800, FX SHO, and FX SVHO models and supercharged Yamaha Jet Boats
WORX Yamaha Supercharger Rebuild Kit
Includes all bearing and plates that are not available to buy separately OEM
SVHO back plate allows the use of SVHO wheels in SHO chargers if front housing is modified.
New thrust plate, bearing and rings to suit OEM and aftermarket shafts
Service kit for worn or failed chargers
NOTE: WORX has thoroughly tested this product in a range of worn and failed chargers. We encourage through inspection of failed charger housings. Damage or excessive wear to housings where shaft bearings locate are non-repairable. Service Kit is designed to replace old OEM components that have excessive wear or have failed.
ET Low Boost Supercharger Impeller
Adding more volume of air for acceleration and 2-3 lbs of boost 11.3 lbs @ 7700 rpm and 14lbs at 8450 This will be a drop in. We have made this wheel 25% lighter than stock. This is a billet wheel made from 7075 T651 and machined on a 5 axis CNC machining center with a blade accuracy of .001 in and also hard anodized for corrosion resistance and balanced to a spec of .008 grin. This wheel works with the PowerShot fuel controller no other fuel requirements needed.
Hands down this are the lightest and highest performing low boost stock ECU wheel on the market.
WORX Recommends the use of a Cooling upgrade with the use if any upgraded Supercharger wheel and reflash!
ET High Boost WHEEL 16LB SHO
Yamaha SHO Engine-Tech S/C Wheel
ET Xtreme billet Supercharger
Yamaha SHO FZR/FZS/FX S/C High Boost 16lb
Race proved the ultimately limited Supercharger wheel.
Hands down the best wheel available.
Engine-tech has been working on this project for quite some time and is now complete. The results are outstanding 15.5 lbs of boost @ 8350 rpm. Machined from billet 7075-T651 using a 5 axis CNC machining center allows a blade accuracy of .001. Balance to a spec of .009 inch gram and comes completely anodized gold for protection against the elements(corrosion resistant).This new Engine-Tech S/C impeller is the lightest on the market and lighter than stock by 17% This will help the clutch longevity. The performance gains are: Arm wrenching acceleration useful for drag or closed course racing and radar runs.T his Supercharger comes with a fuel map that can be loaded in the Motec ECU and setup spec's.
Dyno tested at Motec's dyno this Supercharger wheel makes the most Hp at 348hp at 8500rpm and the most boost on the market today!
Requires: Rising rate fuel pressure regulator, High flow intercooler, Motec or an aftermarket ECU.
Important an "HSK" blow off valve required to relieve stress off the clutch
ET SVHO 24lb GEN2 wheel
Yamaha SVHO E-T S/C Wheel
ET 24LB GEN2 Billet Supercharger Wheel
Yamaha SVHO FZR FZS S/C 24lb GEN2 14 g lighter
Race proven the ultimate limited Supercharger wheel.
Engine-tech has been working on this update and is now complete. The results are outstanding lower out temps increased midrange and more boost. Lighter by 14 grams to increase clutch life. 24 lbs of boost @ 8500 rpm. Machined using a 5 axis CNC machining center allows a blade accuracy of .0002. Balance to a spec of .009 inch gram and comes completely anodized gold for protection against the elements(corrosion resistant).
Requires a aftermarket shaft.
WORX Yamaha 1.8L Intercooler Kit
The WORX Racing Components Yamaha Intercooler kit features a New High Flow High capacity intercooler unit capable of handling up to 500 HP!!! A huge internal core almost twice the size of the inefficient OEM cooler allow maximum airflow for any high boost application allowing for increased RPM and dramatically lowering intake air temperatures up to 22C/72F degrees cooler than OEM unit. The upright element design in which water flows from Bottom of the Intercooler to the top allows an extremely efficient heat transfer allowing more cooler, denser air to enter the engine for increased HP throughout the entire RPM range which can add an extra 45+HP to your watercraft in certain applications.
The WORX Racing Components Intercooler Kit comes complete with removable adjustable Blow off Valve (included), Formed silicone hoses to allow easy access and fitment, all necessary mounting hardware and brackets to mount cooler securely. Also included is complete ‘Cooling Upgrade Kit’ which allows an extra dedicated water cooling line to the Intercooler from the Jet unit and an additional engine block cooling plate to add more water to the engine block to help decrease core engine temps.
New Anodised core!!!!
Huge internal core element for increased airflow and denser air
Extremely lower air intake temps over OEM cooler
Huge HP gains up to 45+ Horsepower in certain applications
Removable bracket, silicone hoses, and necessary hardware all INCLUDED for easy install
Upright element and water flow for increased heat transfer and efficiency
Upright mounting allows water to completely drain from the unit after use
Blow off Valve INCLUDED in the kit to help supercharger reliability and performance
Complete Independent Intercooler cooling kit upgrade for lower air temps
Note* May required adjustment of reverse cable mounting for early model FX 08-11
ET 137X4mm CR Seadoo 15PSI 255/260
ET 137 4MM CR Drop in Wheel for the 255/260. Light edition Billet impeller with 4mm spacer. This is a completely new design from the ground up taller blade hight, lighter, New aggressive blade geometry. There is no other drop-in Wheel that is even close to the acceleration and boost of this ET S/C impeller setup. You will have to add a fuel pressure regulator. Not included. most all 260's come with 48lb injectors. If you have a 255 then you may also have to add 48lb injectors depend on the year. Not included.
13 to13.5lb of boost @ 8100 rpm and 15lb + @ 8500rpm
(Clutch slip must be set to 15-foot lbs and 48lb injectors.) Includes 4mm spacer.
ET 127x 3mm Seadoo 12psi 185/215
11 lbs of boost @ 8100 rpm and 12.5 @ 8600rpm There is no other drop in that is even close to the acceleration and boost of this S/C impeller setup (42lb injectors)
ET 68-140 Extreme Seadoo 16PSI
16-16.5 lbs @ 8650 RPM
18lbs @ 9000rpm
Kit comes with Impeller, spacer and modified front housing
NOTE: REQUIRES MACHINING OF REAR HOUSING
ET 135mm / 300 Seadoo
The all-new ET 135mm x 3.2mm spacer drop in wheel. New generation wheel for 2016 Seadoo 300 platform. Makes 17.5psi at 8800 RPM The new 1.6L engine is designed for midrange to 8800 RPM. ET does not recommend revving over 9000 rpm.
Recommended slip moment be set to 16-foot lbs
There are a few things that are recommended in updating before running any performance. Replace all hose clamps with screw clamps. Re-torque all head bolts, ECU remap to 8600 to 8800 rpm rev limit.
WORX SeaDoo Performance Intercooler
WORX Racing NEW Performance Sea-Doo 4-tec Intercooler provides huge gains over OEM Intercooler providing cooler denser air to the engine increasing horsepower! The 30% larger wider core allows for better heat transfer of compressed air from supercharger or turbocharger before entering the engine. WORX Racing NEW Sea-Doo intercooler is a direct replacement of all Sea-Doo 4-tec external intercoolers and is suitable for all applications from stock to open turbo watercraft. Unit comes with necessary water fittings to suit OEM cooling applications, pressure bleeds on the front of the unit and a replaceable sacrificial anode to extend intercooler life.
Supercharger Rebuild Kit 420881102
Sea-Doo 420881102 Supercharger Kit
Complete kit to rebuild your supercharger., Made of quality Sea-Doo genuine parts and metal washers to increase reliability.